The different aspects of each individual construction project such as the general conditions, design and economic restrictions as well as many more factors mean it is difficult to standardize building processes or plan in detail based on past experiences. As a result operational efficiency is often reduced, and unnecessary waste is generated. To make an organization more efficient and therefore reduce waste production everybody involved needs to appreciate and understand the improvements that can increase the organization?s efficiency. To investigate these improvements a time study was performed on two different construction sites, both of which involved buildings being constructed of prefabricated steel and concrete elements.

During springterm 2010 Erik Persson and Magnus Hansson performed their ThesisWork with DIAB Laholm, in Hallands County for University of Halmstad.The project has been a product development project without exterior customers. Thusit had a great emphasis on functionality and less emphasis on marketing and such.This reflects the ambition to develop machinery to be used within the productionfacilities of DIAB Laholm, not to be sold to exterior customers.Main objective has been to create machinery which enables the production ofrotational symmetric work pieces within a NC-milling machine with 5 axles. Thework pieces milled will be made of DIAB?s material Divyncell with varyingdensities.The project has followed Fredy Olssons method involving Principal ? Primary ?Manufacturing constructions. However a complete manufacturing construction hasnot been made since DIAB just wanted a good Primary construction which will serveas a base for finishing touches at DIAB.By the end of the project material including calculations has been sent to DIAB andthey will finish the work and manufacture the machine if they find economic viabilityin this.The work method has been suited for this by several reasons, it was created withthese projects in mind and it?s also the method most familiar to us..

Detta examensarbete är utfört på det Kognitionsvetenskapliga programmet, Högskolan i Skövde och behandlar begreppen inlärning och tyst kunskap inom industrin.Kognitionsvetenskap är en tvärvetenskap som grundas på sex delvetenskaper: psykologi, filosofi, lingvistik, antropologi, neurovetenskap och artificiell intelligens (Gardner, 1987). I kognitionsvetenskap studeras hur information och kunskap representeras och bearbetas i naturliga system, speciellt den mänskliga hjärnan och hur detta kan modelleras i datorer och andra artificiella system. Genom att studera kognition fås kunskap om mänskliga förmågor och hur det går att bäst stödja dessa. Förmågorna är bl.a. inlärning, uppmärksamhet, minne och perception (hur människan använder sina fem sinnen: hörsel, smak, syn, lukt och känsel).Det ena syftet med undersökningen i detta examensarbete var att få fram hur en inlärning fungerar bäst när en person ska läras nya arbetsuppgifter inom industrin.

The different aspects of each individual construction project such as the general conditions, design and economic restrictions as well as many more factors mean it is difficult to standardize building processes or plan in detail based on past experiences. As a result operational efficiency is often reduced, and unnecessary waste is generated. To make an organization more efficient and therefore reduce waste production everybody involved needs to appreciate and understand the improvements that can increase the organization?s efficiency. To investigate these improvements a time study was performed on two different construction sites, both of which involved buildings being constructed of prefabricated steel and concrete elements.

This thesis focuses on the construction of drystone walls in the county of Sm?land, as well as their historical value and significance to the county. In Riksantikvarie?mbetets Plattform Kulturhistorisk v?rdering och urval, a directory for historical evaluations of buildings and objects, the first clause is to describe the object and its history. When trying to do this, the lack of literature focusing on the constructional elements of drystone walls and their history became an issue and is what prompted the writing of this thesis. With a study of different handbooks, a compilation of the constructional elements of the walls were put together.

Detta arbetes uppgift är att konstruera ett redskapsfäste för en lastmaskin av modellVolvo BM 840. Lastmaskinen är idag försett med ett gammalt mindre bra fäste, denbehöver därför ett bättre, modernare och mer användbart redskapsfäste med hydrauliskredskapslåsning. Den typen av redskapsfäste som ger detta är ett Stora BM-fäste. Föratt få rätt mått har måttuppgifter tagits på andra maskiner och redskap. Resultatet blevkompletta ritningar för att kunna tillverka delarna till fästet på en verkstad.Hållfasthetsberäkningar har gjorts på de viktigaste ställena..

Urination is a biological need but the routines surrounding urination are culturally specific and ever changing. This makes the organization of public space an important part in deciding what actions are made possible for the people in it. This paper considers women?s public urination and the possibilities to merge the need to urinate and the construction of the female body as feminine.A number of texts that describe the construction of the female body and identity as both gendered and socially produced are analysed in relation to women?s experiences of incontinence. Incontinence as a medical diagnosis is by this becoming possible to question, and may be seen as one of several strategies used to manage both the organization of the public space and the expectations of the female body to be a docile body.The conclusion is that a woman who wants to enter public space has the following options when it comes to the need to urinate:To strive for the feminine ideal.

TitleEnergy-efficiency ? of slab blocks built in the sixtiesAuthorsRichard Sandahl and Kim SöderbergEducationHalmstad University, Section for economy and technique Construction Engineering 180 ECTSSupervisorMargaretha Borgström, Universitylector construction physics, Halmstad UniversityContact person at HFABUlf Johansson Heating, sanitation and energy co-ordinatorReportExamination paper at the construction engineering program is performed in cooperation with HFAB (Halmstad real estate concern Inc.)AimThis examinations work is done in cooperation with HFAB and there project on the block around the street Maratonvägen. HFAB:s dwelling stock on this area are going through a bigger renovation and in relation to this they are looking on the possibilities to make this building more energy efficient. That is why this examination paper has as purpose to answer the question if it is possible to make slab blocks built in the sixties more energy efficient. This is done by calculate energy efficient measures on a chosen apartment block at Maratonvägen in Halmstad, in an energy and expense perspective.MethodThe examination paper is based on different methods, mainly calculation but also qualitative conversation studies, economic calculations and literature studies.

In recent years the construction industry has been exposed to increased time pressure which has resulted in a higher amount of wastage. Today 35 % of all construction projects in Sweden is "wasted". Time pressure has risen due to increased competition on the market, with more actors entering the construction business, therefore profit margins decreased which has led to a more pressing need for decreasing the amount of wastage.Bravida is Scandinavia's largest supplier of installations and provides specialist services in electrical installations (heating and sanitation), and ventilation. Mahdi Bawaqneh's task was to investigate where, how and why wastage occurs in the company's projects and how to prevent such wastage. The thesis covers the subjects of lean production, communication in projects and planning of projects.

The design regulations of Boverket (BKR) have long been the mandatory standard for construction design in Sweden. However from the end of the year 2010, the BKR will be replaced by the European standard Eurocode (EC). The transition to EC has been delayed and it is not until the second of May 2011 that the use of EC will be mandatory. Because EC and BKR differ from each other it is highly interesting to investigate and explain these differences.The purpose of the thesis is to compare the two standards and investigate how they give different results or not for the dimensioning of structures of steel with associated loads. The current project HVC (Pets Science Center) in Uppsala is used as a model for the design of the steel structure used in this study.

During springterm 2010 Erik Persson and Magnus Hansson performed their ThesisWork with DIAB Laholm, in Hallands County for University of Halmstad.The project has been a product development project without exterior customers. Thusit had a great emphasis on functionality and less emphasis on marketing and such.This reflects the ambition to develop machinery to be used within the productionfacilities of DIAB Laholm, not to be sold to exterior customers.Main objective has been to create machinery which enables the production ofrotational symmetric work pieces within a NC-milling machine with 5 axles. Thework pieces milled will be made of DIAB?s material Divyncell with varyingdensities.The project has followed Fredy Olssons method involving Principal ? Primary ?Manufacturing constructions. However a complete manufacturing construction hasnot been made since DIAB just wanted a good Primary construction which will serveas a base for finishing touches at DIAB.By the end of the project material including calculations has been sent to DIAB andthey will finish the work and manufacture the machine if they find economic viabilityin this.The work method has been suited for this by several reasons, it was created withthese projects in mind and it?s also the method most familiar to us..

3D, 3D-projektering, IFC, Revit, Navisworks, Cad-Q.

This thesis tries to clarify why more houses such as passive houses is not built and at the same time the differences is described with the conventional construction as a starting point. Sweden has set environmental objectives to reduce energy consumption in buildings by 50 percent by the year 2050 compared to 1995. The passivehouse concept could have a significant role, particularly in the reconstruction of buildings with high energy consumption. For sustainable building the passivehouse technology is an economically viable concept while benefiting the environment. Initially an introduction is given of the background to the problem, purpose and objective of the thesis.

The work presented in this report is written at IEIs department on Linköping Institute of Technology. The report aims to increase the assembly efficiency at Wigells AB. The report shall be used as a guide for the implementation of changes at other workstations in the company. Together with Träcentrum in Nässjö, Wigells AB has identified the needs of this study and contacted IEI at Linköping Institute of Technology.In order to implement an efficient assembly line at the company, studies on lean production have been made. This theory has been studied and together with our own views and findings at the company we have analyzed the assembly area.Wigells is a small company that manufactures wood furniture.

I en stor del av arbetsolyckor som anmäls är en truck inblandad. För att undvika att fotgängare blir påkörda av industrifordon används ofta påkörningsskydd. På Volvo Group Truck Operations i Skövde används idag påkörningsskydd i fabrikerna för att avgränsa fotgängare från fordonstrafiken. Volvos påkörningsskydd är en helsvetsad stålkonstruktion som är fäst i betonggolvet med expanderbultar. Dessa påkörningsskydd är byggda efter platsen de monteras på och är därför svåra att återanvända och reparera.