Safety in the construction industry has become a question of top priority in recent years. Despite a massive investment of time, money and knowledge, the occur-rence of fatal accidents in Sweden alone is around one a month.The purpose of this study is therefore to improve the safety on the construction site. By an examination of the role of the safety agents and their cooperation with the construction workers and supervisors as well as examine how safety agents can improve safety on the construction site, which is the goal of the study.Four questions were formulated based on the purpose and the goal of the study.The methods used to answer the questions were a questionnaire survey, multiple interviews, a literature review and a document analysis.The report describes the safety agent?s role as a complex one with many different tasks. The role of the safety agents is regulated in the health and safety law, but it can sometimes be difficult to interpret and the agents can therefore interpret their role differently.

Work Environment problems on construction work sites are very extensive and discussed. The construction industry is one of the most dangerous industries in Sweden. The construction industry occupies about 290 000 employment (2009), and the investment was 250 billion SEK. This report will investigate the issues of the work environment and offer advice on how these can be measured and imporved. The study includes review and analyses of occupational injury statistics, interviews, inspections and audit and review of the literature.

Mek Stans 07 is a machine developed for Tetra Pak in Lund as a 10p candidate theses project at Halmstad University. The commission behind the project involved development of a machine that punches holes in packages for the inspection division at Tetra Pak. The task for the machine was to facilitate the process of making openings for testing in the company?s other equipment. Researches on different methods of cutting, types of automatization and possible designs were made. To implement the project a design and construction from the base where chosen.

Detta examensarbete behandlar och föreslår förbättringar på kort och på lång sikt vad gäller layouten av Volvo Construction equipment Components AB:s produktionsanläggning i Eskilstuna för transmissions- och axelkomponenter. Utgångspunkten är att skapa bättre och tydligare materialflöden. Examensarbetet föreslår för underavdelningen kugghjul och axlar en blocklayout, vilket innebär att layouten är bestämd till var maskingrupper ska placeras men ingen detaljplanering är utförd, och riktlinjer för kommande layoutförändring. Den förslagna blocklayouten tar hänsyn till en kommande inflytt av härdning och härdverk till transmissionskomponenternas förädlingsflöde. Examensarbetet använder sig i stor utsträckning av B Andreasson tillvägagångssätt i Handledning i verkstadslayout: råd och tips när layouten skall förändras (Bengt Andreasson, IVF, 1997).

Detta examensarbete är genomfört åt Sandvik Mining and Construction inom ramen för det statliga samarbetsprojektet MinBaS II. Sandvik Mining and Construction är ett av Sandvik koncernens affärsområden och har en världsledande position på marknaden för maskiner och tekniska lösningar för bergbrytning m.mMinBas II är ett samarbetsprojekt mellan ett stort antal företag och universitet där staten står som huvudman och löper till 2010.Uppgiften med examensarbetet var att se om det fanns någon metod för att kartlägga de interna transporterna och beräkna deras energiåtgång i en bergtäckt. I brist på en befintlig skulle det tas fram en ny metod och sedan testa denna genom att genomföra fältstudier i en bergtäkt tillhörande Skånska Makadam AB för att sedan göra beräkningar på energiåtgången där.Volvo CE har under arbetet ställt upp med information och även givit oss SiteSimulation, ett simuleringsprogram för simulering av användning av deras maskiner.En del av arbetet var också att utreda hur energiåtgången ändras om förkrossen placeras på en högre respektive lägre nivå än det ställe där bergbrytningen genomförs.För att införskaffa underlag till beräkningarna har fältstudier genomförts i Skånska Makadam AB:s bergtäkt. Där gjordes bl.a. uppmätningar av den fysiska miljön som t.ex.

Today?s construction buildings contain more advanced technologies than before. The development of newer and stricter regulations to the construction industry makes the door environment more and more complex.In large construction projects the door environment is held up as a major challenge to get to in a good way. It turned out after a discussion with one project manager and a site manager at NCC, that the door environment is difficult to get right in major construction projects and it often causes many error reports in to the aftermarket after that the final inspection is completed.Interviews have been done with key figures in the building process at NCC and Akademiska hus. A study on a university building for around 3500 students and with 300 workplaces was made.

Vårterminen 2006.

Allt större och större andel företag väljer att presentera och förmedla varor och tjänster via e-handel. En viktig aspekt vid e-handel är att kunden känner förtroende för e-handelsapplikationen och företaget. Denna rapport redogör för vilken inverkan multimediala inslag har för förtroendet av en e-handelsapplikation, vid initialt användande. En undersökning har genomförts med hjälp av en kooperativ utvärdering av fyra e-handelsapplikationer vilka innehåller olika typer av multimediala inslag har.Resultatet av undersökningen visar att multimediala inslag inverkar positivt på förtroendet för e-handelsapplikationer. Däremot finns indikationer på att för hög grad av multimedialt inslag inverkar negativt på förtroendet för e-handelsapplikationer..

Examensarbetet inleddes med en förstudie där olika förbättringsområden inom organisationen identifierades. Kommunikation i praktiken kan liknas vid ett förstärkningsverktyg vilket påverkar de vanligaste faktorerna för ett lyckat förändringsarbete. Idag måste en ledare och chef vara kommunikativ och det fungerar inte längre med att peka med hela handen. Medarbetarna måste förstå sin chef och ledare och det måste finnas ett samspel mellan dem. För att chefer och ledare ska styra förändringsprocessen behövs kommunikation.Syfte med examensarbetet är att undersöka hur kommunikationsprocessen kan användas som styrmedel mot en social förändring.

Traditionally, mining has been performed mechanically with implementation ofyesterdays (and older) data. Several mining companies have started to useautonomous technology and robotics in the production areas although the harshmining environments make it unsuitable for today's electronic equipment. Despite allthe obstacles along the way of digitization, there seems to be no end in sight as thisdevelopment continues. This thesis focuses on what the mining industry is aiming forand why the mining companies are interested in these technologies. The actors of themining industry can be found to have a vision for the future mine, a production with ahigher degree of digitization and resemblances to a factory.

During my studies to become a guitar builder at Carl Malmsten CTD, I have found an interest in the construction of the classical guitar. I am fascinated by the simplicity of its construction. A simplicity that becomes more complex when you start to study it in detail.In my final thesis I will not try to explain this complexity. The subject is to investigate two different principles regarding its construction. I would like to find out if the sayings concerning one of the principles will yield a guitar with greater ability to produce volume and projection.At a close distance the difference between the guitar?s volumes is not to speak of, but a significant difference can be seen regarding one of the guitars ability to project its sound.

The idea with constructions made out of prefabricated elements is that it should be quick and easy to build as the demands for lower production costs, increased profitability and shorter production times are constantly increasing. High accuracy in measurements and well-balanced tolerances is required to achieve this. The fact that the concrete-elements doesn?t fit and that damage occurs during assembly is a highly topical issue even though we now have methods and systems that make this high-intensity construction possible. Through this report we want to highlight the problems that cause the dimensional and tolerance problems and give suggestions on how to come to terms with these.

The Volvo Trucks plant in Umeå is a highy complex manufacturing facility where the same production line handles a variety of different models. This require flexible and agile processes with high quality standards. This thesis studies the flow of material through a production line and how Volvo can use their existing manufacturing monitoring system to optimize the flow of materials.The goal with the thesis is to identify eventual problems with the flow of materials and to deliver a few proposals on how the production line can improve its productivity. The theory of LEAN, Just-In-Time and Supply Chain Management serves as the scientific reference to this project. By analyzing the flow of material, performing interviews and observing the processes a few problems are identified.

This Thesis in Military Technology deals with experiences drawn from the forced introduction of Weapons Station 01, 2009. The work aims to identify the experiences regarding the forced procurement of military equipment to see how they can develop normal and fast procurement of equipment. The main conclusions of  this work, is to achieve greater capability and increase the military utility, are: -          Common objectives and priorities of stakeholders-          Response and joint types shall determine requirements for system-          Ensure an integrated project team also at lower levels-          Engage the integrated logistic support early in the materiel process-          Include Armed Forces staff as early as possible in the testing and validation-          Prioritize work to facilitate the rapid development of decision on use (BOA)-          Provide back up for increased redundancy in the mission area .

Abstract This degree project examines how much carbon dioxide that emits during the construction phase of a road project. This is to make it possible to compare how the amount of carbon dioxide differentiates between traditional road construction and Swepave construction, which is PEAB?s alternative way to design roads. To make the comparison a calculation tool has been produced. To compare the amount of carbon dioxide emissions a reference project was needed.