Our task was to create a virtual test bench for verifying memory addresses in our commissioning body?s models. The purpose with the testbench was that it should be created in such a way that it would be easy to change the device under test without any major changes in the testbench.To solve the problem that the testbench had to be able to verify different devices we had to create a general enviroment for how the testbench had to be composed. By doing an analysis of which com-ponents that are usually included in a testbench and which components that were necessary in our project we came up with a generall enviroment for the testbench. Our result was a testbench with the follwing basic functions:* Read from a file that contains read and write operations to the Device Under Test (DUT).* Apply the stimulus to the device* Read the results from the device* Compare the results with wanted values* Generate a log file which contains information about the simulation result..

The task given to us was to develop an industrial wheel with new thinking in terms of fresh design and construction, with the ability to brake. While the produced wheels of today only own the property of total braking, a wish was made to integrate the ability of directional locking.The time spent working with the project has been filled with multiple sketches of ideas and function analysis.Choices of material and ways of construction have been verified by calculations, tests and prototype building. The goal of this thesis has been to develop a unique caster with well thought-out design that would be adaptable to different areas of applications.The result was a hubless wheel with the ability of directional locking before total braking.A prototype of the wheel has been made to show the design and functions..

Modeling and simulation is growing ever more important in the development of new products. This thesis describes the use of Hopsan for hydraulic modeling and its use in conjunction with Simulink with the intent of using the model in a hardware-in-the-loop setup. A sensor layer has been created in Simulink to emulate all the internal sensors in a modern forklift. The details of using legacy C-code instead of a hardware MCU for a fully simulated environment, software-in-the-loop has been outlined. There are two major routes one can follow implementing software-in-the-loop, exporting the C-functions to CAPL via a export layer or creating an s-function in Simulink.

This essay focuses on the film Joker (2019) directed by Todd Phillips. It examines the narration and the use of music as a narrative device to discuss questions about identification and perception through close textual analysis. The aim is to research this in combination with the film?s complex storytelling and unreliable narration. The essay use several narratological and psychological theories as well as psychopathology.

The purpose of this thesis is to compare if a charter company's attitude and vision of service can be reconciled with the attitudes and visions that the customers have in the same area. In order to carry out the study a qualitative approach is used. The data has been collected by interviews, focus groups and observations. The framework is theories on the subject of customer satisfaction, quality of service at customer meetings, Self-Service technologies, quality assurance and gap in service.The study has concluded that the approach to service is relatively equal between the company and customers, but the future visions differ. Focus group participants have been thinking bigger and further into the future, while the company focuses more on specific functions.

This report presents the redesign of the online-based non-governmental organization Equalisters? (Rättviseförmedlingen in Swedish) website. It aims to achieve an understanding of how you take into account the user and other stakeholders and their interests when developing a website. The focus was on redesigning an existing website and prioritize the different stakeholders? needs.

ABSTRACTThe privatization of pharmacies in Sweden took place in 2009, in part with higher availability of medicines as justification. For a good adherence, the patients needs a good availability of medicines from pharmacies. The aim of the study was that two years after the pharmacy reform study older people?s opinions on drug supply and pharmacy services, and which pharmacy chains they know about and use. The method used was a quantitative cross-sectional study and was conducted using questionnaires.

The soil acidification and the pH-value of the soil have been discussed for many years. Many observations of the tree species effects on the soil pH have been done. We have discussed the effects on the soil surface pH-value with a birch (Betula spp. L.) admixture in Norway spruce stands (Picea abies L.).We have used data from the Swedish National Forest Inventory. We have also discussed how the wood production and the biodiversity can be increased in mixed stands, in according to the Swedish forestry act Skogsvårdslagen. Our sampling areas are located in Norrland, Sweden. The results show a significant correlation between an increased birch admixture and an increased pH-value of the soil.

The essay, which is solely theoretical to its form, presents a critical view upon the unproblematized usage of the concept of ethnicity in the Swedish mass media discourse. Theories of critical discourse analysis and post colonial nature is applied to and used to analyze what ethnicity really means. The essay also provides an insight in the functions and power of mass media in Sweden today to understand why ethnicity is so widely used, and what consequences it may bring upon the systematically excluded "other" and the society as a whole..

The aim for this bachelor thesis is to find an answer for the placement of Migration and Vendel period graves on preexisting house constructions in Sweden. The reason behind these graves being built on their respective places will be analyzed, discussed and compared with similar finds in Scandinavia, where a wide contact net had been established during this time. Different kinds of social and religious meanings and functions with the grave mounds will also be taken into consideration during the discussion and analysis. The actual findings in the graves will be not be a part of this thesis, as the aim is to focus more on the grave itself as a cultural and social symbol for the people, and the values it had, during the time period it was built..

There is limited research done in the area of management control in the relationship between companies. This study investigates management control in outsourcing relationships and the decision to change sourcing strategy and to insource functions. The empirical research was conducted at an international company, which in this study has been anonymized. The research is mainly based on interviews. To extend and verify the conclusions drawn, another company, AB Ph.

This report is written on the assignment by Nexans IKO Sweden AB in Grimsås which is a cable manufacturing company. Nexans IKO Sweden AB was in need of help to examine possibilities for saving energy by saving compressed air, in first place by using the compressed air more efficient. The task was to determine the present situation, making the airwipe stations more efficient by reducing the consumption of the compressed air and in turn save money. Even the aspects of the working environment were discussed as the noise levels from the pneumatic systems and engines are usually high. A schedule over the airflow in the factory and the inventory over current airwipessituation was made.

This report describes the process of developing a user-friendly and responsive archive website. The website is a Hi-fi prototype and was created for the company JG Communications, to serve as an archive for their customers? style guidelines. To create this website I have used HTML5 and CSS3 to make it responsive for various computer screens. I have also used PHP and some JavaScript to make some of the functions and Adobe Photoshop and Illustrator to make design elements for the prototype.

The county administration asked LKAB to make an inventory of possibly contaminated sites caused by their mining activity. The inventory should be performed according to the MIFO model, a method from SEPA which is used to assess a contaminated site. The first phase involves collection of information through interviews and site inspections and in phase 2 a general survey with field sampling is conducted.LKAB started the work with the first phase of the survey during 2003. During this project the information collected in Phase 1 was evaluated and 16 of the sites were chosen to proceed to MIFO Phase 2 (six sites in Kiruna, and 5 sites respectively in Svappavaara and Malmberget). The sampling of these 16 sites was performed during week 27 2004.

The county administration asked LKAB to make an inventory of possibly contaminated sites caused by their mining activity. The inventory should be performed according to the MIFO model, a method from SEPA which is used to assess a contaminated site. The first phase involves collection of information through interviews and site inspections and in phase 2 a general survey with field sampling is conducted. LKAB started the work with the first phase of the survey during 2003. During this project the information collected in Phase 1 was evaluated and 16 of the sites were chosen to proceed to MIFO Phase 2 (six sites in Kiruna, and 5 sites respectively in Svappavaara and Malmberget). The sampling of these 16 sites was performed during week 27 2004.