Sewer trenches usually contain material with a higher hydraulic conductivity then the adjacent soil. Thus they can serve as paths of preferential flow in a polluted area. Wastewater from factories can also leak from wastewater pipes and pollute the soil in the sewer trenches.The purpose of this project was to investigate pollutions in sewer trenches and in sewer pipes in the industrial area of Köpmanholmen, 20 km south of Örnsköldsvik in the north of Sweden. To make an estimation concerning the potential of transport of pollutions in sewer trenches, hydrological calculations were performed.Leakage to any greater extent did not seem to be a problem in the area. This is the case both for the concrete and the wooden pipes that have served as factory wastewater pipes.

The purpose of this thesis for Sapa Heat Transfer is to examine a furnace in which aluminium is pre-heated before hot rolling. The project is modeled in a computer environment in which the air flow in the furnace and the heat transfer to the aluminium solids are included. The computer environment and its governing equations, as well as boundary conditions and generalizations, are presented and explained.The simulations are based on two models. The first model has an asymmetric solid placement, which is how it looks in today's ovens. It is validated against collected data.

This master thesis is performed at Scania Axles and Gearboxes, a production plant located in Södertälje. Within the plant axles, gearboxes as well as central gears are assembled from components to finished products. All production is conducted on production lines, with a pre-determined rate, which is supplied with components by the material handling department. Since the production quantity and the mix of product variants produced on the production line is customer order-based, the number and type of components needed for production as well as appropriate staffing within the material handling department is difficult to predict. Scania is currently using a number of different resource planning tools for each material handling-department within Axles and Gearboxes to visualize the workload within the departments.

Youth unemployment in Europe is a big problem today. The number of unemployed young people has risen past decades, from 10 % in1980 to over 20 % 2010. The purpose with this thesis is to deal with big cohorts and unemployment rate for young people 20-24 years old in Sweden. I have a look at three different generations, people born:1963-1967 and start working 19871968-1972 and start working 19941988 and start working 2008-2012Did these people from a baby boom face any specific difficulties when entering the labor market 20-24 years later? I have used Easterlin theory in my work and lokked at statistics from SCB (Statsitiska centralbyrån) in Sweden.

SCA has today almost 300 000 hectares of their forest land planted with lodgepole pine(Pinus contorta var. latifolia). Due to initial extensive planting in the 1970ies the area oflodgepole pine forests in the thinning age has grown rapidly from the end of the 1990ies.During the years 1996-2005 first commercial thinning of lodgepole pine at SCA took place.The goal of the hereby presented study was to investigate the growth and stability in thosefirstly-thinned lodgepole pine stands a few years after thinning. Furthermore, the objectivewas to investigate the relationship between stand stability and different stand parameters.Additionally, lodgepole pine stem quality was estimated.The study is mainly based on the data collected during an inventory project carried out atSCA in 2008. Altogether 91 lodgepole pine stands in northern Sweden were measured afterthe first thinning.

Forest enterprises have always searched for ways to improve efficiency. For the past few years there has been an emphasis on stock-keeping levels. Increased demand for fresh round timber and the need to decrease the amount of tied-up capital has made the forest industry reduce its inventory levels. This has brought on a higher demand on the timber supply from the forest management districts concerning both delivery in time and assortment output. As a result, the flow of timber has fluctuated a lot with serious consequence for the timber supply during 1994.

Business Process Modelling Notation (BPMN) is a way to graphically draw a diagram of a business process. A BPMN diagram consists of several so-called flow objects. These are interconnected in the graph through sequence  flows. BPMN models are merely graphical representations of business process and there is a need to simulate these diagrams for different purposes. The simulation that now is available for BPMN is that the model is evaluated by checking if it is correct.

The Goal with this Master of Science thesis is to expand the possible turbine efficiencymeasurements on an exhaust turbocharger. It was done as a part of the CICERO competencecentre. To feed the turbine with air a special flow rig has been used. Instead of loading theturbine by just restricting the compressor flow a docking system for an electrical dynamometer isdesigned to use the dynamometer as an additional loading source. By using an electricaldynamometer as loading device for the turbine, measurements are not depending on compressorperformance.A large part of the work consists in designing accessories for the dynamometer.

The ISO standard ISO/IEC 17799/SS-627799-2 is a guidance for organizations to realize their information security goals. In spite of this standard, studies show flaws regarding information security in organizations. In particular flaws regarding overall view, knowledge and clear roles and responsibilities have been observed. The ISIT (Information Security Integrated Three level) model and its guidelines, developed in this thesis, help organizations to identify the required processes and procedures as well as the logical process flow. The thesis is based on theoretical studies and a case study within a multinational company.

Syftet med detta arbete är att undersöka hur dynamisk svårighetsjustering påverkar hur spelare värderar ett spels svårighet, presterar under en spelsession och huruvida de kan upptäcka ett system för sådan justering samt identifiera hur det fungerar.  Arbetet vilar främst på Robin Hunickes arbete kring dynamisk svårighetsjustering men vidrör även koncept som svårighet, flow och olika typer av svårighetsjustering. För att undersöka huruvida system för dynamisk svårighetsjustering påverkar spelande har ett plattformsspel utvecklats och speltestats i två versioner av en handfull respondenter, en version som justerar svårigheten i spelet dynamiskt och en som balanserats för hand. Resultatet från dessa speltester ger inga direkta stöd för att dynamisk svårighetsjustering får spelare att prestera bättre och tyder på att spelare vid en första spelomgång har svårt att identifiera system för dynamisk svårighetsjustering. Resultatet visar dock även på att mer undersökningar kan behövas på ämnet i framtiden..

In this study I have analysed the history of a forest belonging to Saxåhyttan in Värmland. The study area is 448 hectares and has been used by iron industry since the 16th century. A forest that has been used by man during at least 400 years should have few ecological values. This inventory however shows the opposite. The aim of the study is to interpret the history of the forest in the area, i. e.

The purpose of this Bachelor thesis is to analyze if there is a correlation between stock prices and the amount of searches of the companies names on Google. The theories used in the study were Capital Asset Pricing Model (CAPM) and Efficient Market Hypothesis (EMH). Regressions analysis is used as the statistical method to see if there is a significant correlation between the stock prices and the amout of searches of the company name on Google. The data used were the rate of return of three companies (ABB, Oriflame and Sandvik) on the Nasdaq OMX Nordic stock market, the rate of return of the Nasdaq OMX Nordic stock market index (OMX Stockholm_PI) and the Google search frequency from Google Trends on each company. The result showed no significance and the conclusion of the thesis is that there is no significant correlation between the three studied companies and their search frequency on the search engine Google..

Today, there are a number of different models and methods used to estimate the equity value of a company. A common tool for valuating stock prices is the usage of different multiples. This is a method used to determine the value of a company, by examining and comparing the financial ratios of relevant peer groups. The disadvantage with this method is that it does not take all the important aspects, such as risk, investments and capital structure, into consideration. However, this study investigates if the key value, called discounted cash flow (DCF), can be integrated with the valuation of the multiples.

During the last 50 years the production of milk per cow has increased. This has, however, been followed by a decreased reproductive performance. Shorter and more indistinct signs of oestrus make it harder for the Swedish farmers to discover when the cows are in oestrus. There is a need for ways to control reproduction. The use of pheromones could possibly provide means to satisfy this need.

The ISO standard ISO/IEC 17799/SS-627799-2 is a guidance for organizations to realize their information security goals. In spite of this standard, studies show flaws regarding information security in organizations. In particular flaws regarding overall view, knowledge and clear roles and responsibilities have been observed. The ISIT (Information Security Integrated Three level) model and its guidelines, developed in this thesis, help organizations to identify the required processes and procedures as well as the logical process flow. The thesis is based on theoretical studies and a case study within a multinational company.