Background - Swedish trade and industry primarily involves small corporations, including small manufacturing corporations. Currently, most costing models that are used are based on studies accomplished at large corporations. This conveys to the fact that product costing that occurs at small manufacturing corporations is based on all complexities that large corporations bring, which rarely match with small corporations. It occurs that small manufacturing corporations unconsciously rely on incorrect information that has been calculated based on great corporations? product costing.

This thesis for the Master of Science degree was performed at Solectron Corporation in Norrköping. The background for the thesis was a need to develop and build two test fixtures to automatize testing and adjusting of transmitter modules (TX-fixture) and receiver modules (RX-fixture) which are head devices in DWDM-systems. The basic elements for the test fixtures are: Test board, switch board and DC/DC board. The main function of the test board is to handle communication between the transmitter and receiver modules and supply voltage to these modules. The test board was insufficient and modified with a microprocessor to handle the communication between the PC and the receiver module.

Weaning is one of the most critical events in the piglet production with problems such as growth check and post-weaning diarrhea as a result. The lighter the piglets are when the growth check occurs, the harder they have to get back to normal growth rate. Creep feeding of piglets is used to reduce the problems by increasing the weaning weight and adapting the digestive tract to a starter diet. Hodge (1974) showed that the sow?s milk can not provide enough nutrients for maximal growth rate.

This is a literature review of how the climate change affects the forest growth innorthern Sweden. The temperature will rise about 5 °C with the largest increase in thewinter season (December - February) and the CO2level in the atmosphere is expected tobe doubled. Precipitation patterns will change and increase with 25-35 % and theprecipitation will be in form of rain rather than snow. Today the forests in northernSweden are entirely dominated by coniferous stands. This may shift with the climatechange and results in a larger number of deciduous trees, preferably birch will becomestronger and grow better and faster.

According to FSC (Forest Stewardship Council) shall at least a mean of 10 trees per hectare including riparian zones and other areas with high biological values be left in final felling. In addition large clear areas should not be created and all retained trees with high environmental value shall be spared. To leave trees in final felling means a lower cutting volume and hence a lower income from the cutting, but it also means that the production in the next generation becomes less because of competition. The aim of this study was to evaluate the effect retained trees have on the production in the new generation of forest, and to investigate if there is any way to lower this effect. The environmental care has also been estimated by the amount left in final felling.

Examensarbete utfördes på CA-Verken i Sävsjö som bl.a. tillverkar hydraulcylindrar. De senaste två år har CA-Verken haft en kraftig ökning av omsättningen och det som står i vägen för fortsatt expansion är produktionen som har begränsad kapacitet.Målet med detta arbete är att studera CA-Verkens produktionsflöde för att kunna identifiera flaskhalsen/flaskhalsarna och därefter ge förslag på lösningar och förbättringar. Den teorin som har använts som grund till arbetet är Theory of Constraints (TOC). Intervjuer, företagets affärssystem och observationer har använts vid datainsamling.

The investigation was initiated because of the high workload of the sellers and, additionally, because the Tunadal sawmill has received low ratings in customer surveys. Thus,  two main approaches are adopted here,  the first being to investigate which of the three methods  of working, namely, market divided flow organization, function organizationand flow organization with collaboration, proves to be the most beneficial. The second is to investigate whether there is an available method to ease the daily work. A literature review has been made in order to determine more efficient ways for the sellers to work in the Tunadal sawmill. During the investigation, an in-depth investigation into the total quality management using a balanced scorecard as a management tool was conducted.

The Transport division is responsible for the internal transports on Sandvik MaterialTechnology AB. At the moment there is no clear picture of how the straddle carriers aremoving at the division Primary Products and if it is working in a satisfying way. It isimportant to see the whole picture of the transportation flow so improvements can be made.The purpose of this essay is to survey and analyse the truck flow in a Lean Productionperspective. The essay is delimited to only include straddle carriers transportation ways in thePrimary Products division. To survey the truck flow we have used a method called Walkthrough.This means that we have walked thorough the whole production flow andinterviewed some of the employed on the way to get the necessary information.

Dagens konsumentbeteende online skiljer sig åt från hur det såg ut för bara några år sedan, någotsom kan förklaras av att både e-handel och Internet ständigt utvecklas och vårt köpbeteende ochvåra preferenser tenderar att förändras över tid. Den tekniska utvecklingen gör attkonsumentbeteendet inom e-handel tenderar att växla snabbt vilket gör kontinuerlig analys avkonsumentbeteende till en nyckelfaktor för att lyckas inom e-handel.Studien syftar till att undersöka det något yngre kvinnliga segmentets, i åldern 25-34 år,konsumentbeteende inom e-handel idag. Flow är ett använt begrepp för analys avkonsumentbeteende och har visat sig påverka både attityder och avsikter avsevärt inom virtuellamiljöer som exempelvis e-handel. Flera definitioner på begreppet tyder på en viss komplexitetoch att tillståndet tenderar att förändras och växa i takt med utvecklingen. I studienkonceptualiseras flow i kategorierna koncentration, njutning och förvrängd tidsuppfattning, där viundersöker hur de påverkar webbsajters användarvänlighet och konsumentens upplevdabeteendekontroll, och vi fokuserar på konsumentbeteende online i form av impulsköp och avbrutna köp då vi önskar analysera om beteendena påverkas av ett flow-tillstånd Via en enkätundersökning med kvinnliga studenter från svenska universitet visar våra resultat attflow i form av njutning och förvrängd tidsuppfattning ökar impulsköp, medankoncentrationsnivån inte har någon påverkan på konsumentens impulsivitet.

AbstractDegree thesis Solid content in Lime Mud By Andre Flodin Process operator program ? Umeå University 17/6 ? 2014 Pages: 21A thesis was made on Billerudkorsnäs production unit in Karlsborg where lime kiln in the causticising department of chemical recovery plant does not meet the required production. Causticising department is the final step in the chemical recycling unit. There, the filtered green liquor is mixed with lime to recover the cooking chemicals used in the pulp factory. The cooking liquid is called white liquor.

Background: Increasingly, companies choose to finance their business with corporate bonds which has resulted in an increased demand on credit ratings. As such the rating agencies have a very important role in the financial markets. Examining the value of a credit-rating can be very interesting for both issuer and investor. Purpose: The purpose of the study is to identify and define the value of rating. Execution: The study is built upon nine interviews with rated and non-rated firms and investors.

Business Process Modelling Notation (BPMN) is a way to graphically draw a diagram of a business process. A BPMN diagram consists of several so-called flow objects. These are interconnected in the graph through sequence  flows. BPMN models are merely graphical representations of business process and there is a need to simulate these diagrams for different purposes. The simulation that now is available for BPMN is that the model is evaluated by checking if it is correct.

The objective of the present study was to evaluate distillers? dried grains with solubles (DDGS) as a protein source to rainbow trout (Oncorhynchus mykiss), by studying digestibility and growth measurements. One control diet, totally lacking DDGS, and three test diets were made containing 10 % (low), 31% (medium) and 51 % (high) DDGS respectively on dry matter (DM) basis. The control diet and the test diets were made to be as nutritionally equal as possible. Wheat bran was used to balance the fiber content of the diets.

AbstractIt is unclear how L2 students acquire vocabulary ? how is it taught ? or wheather it can even be taught. In an SSL (Swedish as second language) program for young adults the ambition has been to integrate the L2 students? into the national high school (gymnasium) courses as quickly as possible, in order to meet the students? demands for subject education and to challenge them on an appropriate knowledge level. Teachers noticed quite early that the course ? integrated L2 students seemed to have a deeper understanding of words and an easier flow in their speech.

In recent years, existing solutions for cooling personal computer CPUs have been supplemented by a new product category, factory sealed water cooling loops. These systems, consisting of a water block with an integrated pump, a fan and a radiator, perform well compared to the air cooling solutions but are less effective than larger, custom-built water cooling systems.This project aims to explore the most important aspects of a factory sealed system and to identify possible cost-effective enhancements of the performance.The most significant differences between the different groups of water cooling loops are the block design and the pumping power. The performance of both categories is also largely dependent on the fan power, but increasing fan power has a large negative impact on the noise level.Both radiator size and fan model choice appear, in tests, to be relatively unimportant, presuming that the noise level is kept constant. The position and direction of the fan, however, has significant impact on both the temperature and the sound level.Water blocks can be designed in several different ways, both regarding the heatsink design and the flow direction. In simulation, flow with the inlet centered above the heatsink result in considerably lower pressure drop and slightly higher temperatures than flow through the block, for heatsinks with fin arrays.Creating a competitive product in this product segment certainly seems possible, as there are performance-increasing changes to be made that seemingly has little impact on the production cost.