The project was performed in collaboration with Husqvarna, one of the world?s leading manufacturer in the market of electric outdoor products. The report is a thesis work of a bachelor mechanical engineer program, in the field product development and design.The project is a study of the development opportunities within drive belt for a gear driven gearbox to one of Husqvarnas petrol powered hedge trimmers. A big part of the project was also to find combinations of materials for all components in the gearbox, to reduce weight and maintain or improve the performance of the system. Belt drive was of interest to investigate as an alternative solution to the current design that can reduce wear on the system at a performance test performed in the company before the product is released to market.

Today´s roofing of dwelling houses is a very time consuming procedure, which includes a lot of different steps on the construction site. Not only does it cost a lot of money, but often do problems with rot and mold occur in the attics of houses today. The use of prefabricated modules has seen a great breakthrough in the field of construction of dwelling houses; at least when it comes to foundations and walls, where this type of approach makes the construction process way more efficient. What no one previous has succeeded to develop is a corresponding system for roofs that meets the demands of a dwelling house. Accordingly the goal of PlusTak has been to come up with a proper module system for roofing of dwelling houses, where the roofing is completed to meet the demands of the Scandinavian market. During the project a lot of effort has been put into customer contacts and the usability of the product, as well in the manufacturing process as on the construction site. This development has gone hand in hand with several practical tests and tryouts.

The Swedish market for unsecured loans has frequently been attacked by media and government officials. Some actors have been accused of exploiting customers and charging inappropriately high interest rates. Despite the public interest very little academic work has been published on the topic. Therefore it is our purpose to investigate why the prices can differ so much between the different actors. Further, we also aim to conduct a market overview as a secondary purpose which will help us in reaching our primary purpose.

This report covers a product development project conducted as Bachelor of Science thesis forthe Innovation & design engineer program at Karlstad University.The assignment was supplied by MMB Consulting, Kristinehamn. The purpose of this projectwas to find an alternative way of shaping wire-net insulation mats. This insulation product isused for fire and thermal insulation of technical installations. The insulation consists of stoneor glass wool with a sewn on steel wire netting on the out facing side. This netting has thepurpose to enable fastening to e.g.

This thesis gives suggestions as to how to design a wooden-based wave-power buoy. The thesiswas carried out at Uppsala University in collaboration with the Division of Electricity and AppliedMechanical Engineering. The product was conceived and developed taking into consideration anumber of requirements put forward by the supervisor, Magnus Rahm. The most importantdemands were that the material used should be able to withstand pressure from the sea withoutbeing damaged and that the production costs should be low.Department of Engineering Sciences, Division of Electricity at Uppsala University was visitedseveral times to discuss issues including the various ideas with the supervisor Magnus Rahm, andwith several people in the department.The work started by studying available literature in order to get background information aboutsuitable methods available for the project and to see how similar projects were carried out. Thereason for this was to get a better understanding of this particular problem and how to solve it.After consulting the supervisor, the group decided to construct four different buoys using fourdifferent materials.

This thesis gives suggestions as to how to design a wooden-based wave-power buoy. The thesiswas carried out at Uppsala University in collaboration with the Division of Electricity and AppliedMechanical Engineering. The product was conceived and developed taking into consideration anumber of requirements put forward by the supervisor, Magnus Rahm. The most importantdemands were that the material used should be able to withstand pressure from the sea withoutbeing damaged and that the production costs should be low.Department of Engineering Sciences, Division of Electricity at Uppsala University was visitedseveral times to discuss issues including the various ideas with the supervisor Magnus Rahm, andwith several people in the department.The work started by studying available literature in order to get background information aboutsuitable methods available for the project and to see how similar projects were carried out. Thereason for this was to get a better understanding of this particular problem and how to solve it.After consulting the supervisor, the group decided to construct four different buoys using fourdifferent materials.

In this essay we discuss the broad area of website usability from a tourism perspective. Our goal was to investigate the usability in smaller and bigger tourism websites. We have declared what website usability means and the importance of involving the users when designing a user interface. In a pilot study, we conducted three interviews with people who work with usability and then used the information we got to form questions to use in a focus group interview. In this focus group, we asked three people to assess two Swedish tourism websites, one bigger and one smaller, to find out if they were considered usable and if there was any difference in usability depending on the size of the site.

Extended Producer Responsibility (ERP) is a form of product take-back regulation that requires the producers to manage their products at the end of life. By internalising the products? entire life cycle costs into the market price the ultimate objective of such regulations is to reduce the environmental burden from the products. This Master´s thesis seeks to examine if the total life cycle cost of a product actually is borne by the producer, and if not, predict who will then take this cost. This is done by analysing the market for take-back activities in three different categories of products; electrical and electronic equipment, cars and wind power stations.

Almost every day newspapers cover companies and brands in crisis. This should worry companies as negative publicity has been shown to have a great influence on consumer perceptions on brands. In addition, brand crises have been shown to be contagious, meaning that they also affect consumers? views on other similar brands. This study aims to investigate spill-over effects of one brand crisis to another within a product category.

The thesis concerns itself with studying the effects private brands has on the consumer?s impulse buying in the grocery industry, as in degree of unplanned spending and the selection process between manufacturer brands and private brands when such a purchase is performed. The study?s methodology is characterised by a qualitative approach, whereby the study acknowledges the inductive approach towards the empirical setting even though the Mehrabian-Russell model along with motivational theories serve as highlighters of relevant aspects in the empirical field. The study concludes that both the utilitarian and the hedonic consumer decide what to buy before entering the store, whereby a low degree of needs arise in the store.

Shorter hospital stays increases the need for well functioning post hospital aftercare. Persons close to the patient are often involved in the aftercare and need information about self-care. This need is frequently not satisfied. The aim of this study was to investigate if the next-of-kin of patients cared for at the thoracic clinic at Uppsala University hospital, have received information about self-care and how they perceive the information they have been given. METHOD: To investigate this, questionnaires were sent out by mail.

Product development cycles become shorter and shorter. The time from idea to market has become an important competitive factor. Despite this, methods used for making the product development process faster are surrounded with uncertainty about their efficiency. The purpose of the thesis is to describe the pros and cons of ?best practice? methods for shortening lead times and how these methods effect the lead times in research and development.

This study has been carried out as a part of the EC funded project, SMARTDOC IST-2000-28137, with the objective of developing application components that provide highly interactive visualization and collaboration functionalities. The low-level components from the graphics library AVS OpenViz 2.0 are used as the development basis. The application components can be inserted into electronic documents that allow embedded controls such as web documents or Microsoft Word or PowerPoint documents. Instead of displaying results as static images, a SMARTDOC component provides the ability to visualize data and interact with it inside the document. Although the principal goal of the SMARTDOC project is to create components in a number of different application domains this study concentrates on developing a medical imaging application component in collaboration with the project partners AETmed and professor Alan Jackson at the University of Manchester.

This study aims to investigate how consumers perceive variety in grocery stores and further how private brands have affected consumers? perceptions of variety in grocery stores.The study focuses on the perceptions and attitudes towards variety and the impact of private brands on perceived variety. Hence, a qualitative rather than quantitative study has been used. Photo elicitation has been used in both focus groups and in-depth interviews, which have been the empirical data collection of the study. Scientific articles and books have also been used in the process.

This is a degree project performed at Halmstad University in Sweden on the subject carpet ofreinforcement. This project is developed in association with Celsa Steel Service in Halmstad.The purpose of this report is to investigate how much time that can be saved if carpet ofreinforcement is used instead of the traditional way to work with reinforcement and seewhat kind of parameters that is important between the choices. We are also going to seehow this product affects the situation for reinforcement workers from an ergonomic point ofview.Carpet of reinforcement is made by straight reinforcement?s bars that are welded togetherwith steel bands. These rolls are made at a factory with a machine that welds together thebars in determined centre distance, with desired dimensions after the constructionengineers? blueprints.