Today when new and harder demands on CO2 emissions are developed, vehicle manufacturers must work to develop new engine solutions to new kinds of fuels to replace fossil fuels. A fuel that could be applied is hydrogen. When hydrogen is combusted only water vapor occurs. Hydrogen is known to be explosive and flammable. These properties are both good and bad for combustion.

Today the competition in the automobile industry is getting all tougher. The technology behind cars becomes more advanced. To get ahead of competitors car companies has to look into new areas of innovation.One important area is vehicle safety. Bigger companies have come so far in vehicle safety that difference between cars more depends on the car type (size) than the technology behind it.There is one area where vehicle safety that still has great opportunities for improvement, which is in active safety. The term active safety states that the car has the ability to identify treats and automatically respond to the treats.

This report relate a concept study that consider a number of different proposals to improve the overcharging system in BAE Systems Ha?gglunds tracked vehicle series BvS10, to maintain sealevel power at extreme altitude.At high altitude the power losses beacuase of the air density that decreases, which results in less fuel can be burned. The decreasing of air density also gives rise to fatigue failure of the turbocharger unless power is reduced.The proposals shall be as required by BAE Systems Ha?gglunds economically sustainable and defensible from a packing perspective. That means the selected solution must have a reasonable price tag and at the same time a minimal impact on adjacent components.The basis for this thesis is based on benchmarking of both the auto industry as the flight industry, to find inspiration and tips for improvement.Some of the concepts have after gathering facts and calculations been excluded while other solutions has been considered as workable and thus interesting for BAE Systems Ha?gglunds.Initially the current turbochargingsystem was analyzed in order to determine the starting point and thus be able to fix the current problems surrounding high altitude driving.

Scania CV is one of the world's largest truck manufacturer. It is not only the directproduction of vehicles and methods that are important for Scania but also the servicemarket handling spare parts, repairs and workshops. The department Vehicle ServiceInformation construct standard times through work measurement for particularworks in the workshops. The software application STAM is used in the servicemarket to create and store standard times which then are exported to theworkshops' own systems.The purpose of this master thesis is to analyse and evaluate the internal workmeasurement system that includes standard times and the software STAM. Also,based on external analysis and benchmarking of other systems suggest appropriatefuture development within the area for Scania Vehicle Service Information.In order to perform the investigation, interviews and studies have been doneinternally at the departments that are involved in work measurement as well asexternally at Scania workshops.

Scania CV is one of the world's largest truck manufacturer. It is not only the directproduction of vehicles and methods that are important for Scania but also the servicemarket handling spare parts, repairs and workshops. The department Vehicle ServiceInformation construct standard times through work measurement for particularworks in the workshops. The software application STAM is used in the servicemarket to create and store standard times which then are exported to theworkshops' own systems.The purpose of this master thesis is to analyse and evaluate the internal workmeasurement system that includes standard times and the software STAM. Also,based on external analysis and benchmarking of other systems suggest appropriatefuture development within the area for Scania Vehicle Service Information.In order to perform the investigation, interviews and studies have been doneinternally at the departments that are involved in work measurement as well asexternally at Scania workshops.

Scania CV is one of the world's largest truck manufacturer. It is not only the directproduction of vehicles and methods that are important for Scania but also the servicemarket handling spare parts, repairs and workshops. The department Vehicle ServiceInformation construct standard times through work measurement for particularworks in the workshops. The software application STAM is used in the servicemarket to create and store standard times which then are exported to theworkshops' own systems.The purpose of this master thesis is to analyse and evaluate the internal workmeasurement system that includes standard times and the software STAM. Also,based on external analysis and benchmarking of other systems suggest appropriatefuture development within the area for Scania Vehicle Service Information.In order to perform the investigation, interviews and studies have been doneinternally at the departments that are involved in work measurement as well asexternally at Scania workshops.

Scania CV is one of the world's largest truck manufacturer. It is not only the directproduction of vehicles and methods that are important for Scania but also the servicemarket handling spare parts, repairs and workshops. The department Vehicle ServiceInformation construct standard times through work measurement for particularworks in the workshops. The software application STAM is used in the servicemarket to create and store standard times which then are exported to theworkshops' own systems.The purpose of this master thesis is to analyse and evaluate the internal workmeasurement system that includes standard times and the software STAM. Also,based on external analysis and benchmarking of other systems suggest appropriatefuture development within the area for Scania Vehicle Service Information.In order to perform the investigation, interviews and studies have been doneinternally at the departments that are involved in work measurement as well asexternally at Scania workshops.

This report is part of the major thesis carried out at Stoneridge Electronics in Bromma,Stockholm during autumn and winter 2005-2006. The background to the thesis is the trendwithin the automotive industry where color displays have become more common for presentationof information to the driver, a trend that has come to the commercial vehicle market. Thepurpose of the thesis has been to evaluate whether programmable logic, with respect to FPGAtechnology, could be suitable for display control and graphics generation of these more complexcolor displays in automotive environment.Within the scope of the thesis the FPGA technology has been investigated, i.e. whatopportunities and threats there are with aspect to environmental and security requirements. Inaddition, the market of FPGAs and pre-built IP-cores has been investigated.

In Sweden the most common type of road traffic accidents involving passenger cars are single accidents (where only one vehicle is involved). The aim of this thesis is to analyse how these accidents occur, and present recommendations on how to reduce the number of deaths. Data has been collected from the Swedish Transport Administration?s in-depth studies of fatal accidents. Road traffic accidents with fatal outcome that happened on public roads during the years 2007 to 2009 have been studied.

Nya typer av krigföring, så som COIN-operationer (Counter insurgency), ställer nya krav på flygstridskrafterna. Utvecklingen av det bemannade stridsflyget har, om man jämför med UAV (Unmanned Aerial Vehicle), trots detta stått relativt stilla. Obemannat stridsflyg har samtidigt utvecklat förmågor som gör funktionen till en värdig konkurrent på det moderna slagfältet. Syftet med denna uppsats är att undersöka huruvida obemannat stridsflyg kan överta det bemannade stridsflygets plats inom ramen för COIN-operationer. Detta avser jag uppnå genom att undersöka hur väl de båda funktionerna svarar uppmot de krav som ställs på ett stridsflygplan i en operation med inslag av COIN.

Handling, loading, transport time and unloading in connection to transport of farm animals affect animal welfare. Induced effects include both psychological and physiological stress responses in animals. The physiological parameters may be measured through blood analysis while behavioural changes often manifest themselves through increased vocalisation, escape attempts and apathy. Physiological parameters are additional parameters of importance when measuring animal stress responses. The handlers behavior during transport has been shown to have major impact on animal welfare and the quality of meat. Animal friendly handling and driving of animals create a more manageable work environment for the handlers. To further increase animal welfare in connection to transport, stables should be built with well adapted drift passage and ramps on the transport vehicle.

In this study a case study was conducted at the Transport Agency. The government agency is seeking better alternatives to its current ways of keeping track of important dates stated in legal documents. The agency wants to explore the possibility for an IT-solution for keeping track on those dates. In the case study change analysis was conducted on the vehicle type approval process. Qualitative interviews were conducted with a section manager, vehicle type and component approvers, and with a system administrator and a system manager at the Transport Agency in Borlänge.

This master thesis has been carried out on behalf of Stoneridge Electronics AB and is an investigation ofhow intelligent switches can replace the traditionally used direct controlled switches. The concept ofintelligent switches is that the switches contain electronic identification components which, by connectingthem to a network, give the same function independent of the location of the switch. This infers anincreased flexibility and configurability which can be a great advantage in development, production andcustomization in the commercial vehicle industry. Especially in the current situation when commercialvehicle manufacturers provides more and more functions and dashboard configurations.LIN (Local Interconnect Network) is a network protocol introduced in 1999. It is a simpler and lower costcomplement to CAN (Controller Area Network) and is adapted for applications where the demands forbandwidth are lower, for example reading sensors and switchers.

Svanen är en av världens ledande miljömärkningar och firade nyligen 20 års jubileum. Det har under ett antal år varit möjligt att förutom produkter även svanenmärka tjänster och verksamheter, så som exempelvis restauranger och hotell. För att miljöarbetet inom en verksamhet ska fungera så bra som möjligt är kommunikationen i denna av yttersta vikt. Det har inte utförts några kända studier kring hur kommunikationen på Svanenmärkta hotell fungerar vilket är motivet bakom denna studie. Det finns en misstänksamhet i samhället mot miljömärkta varor och greenwashing har blivit ett allt vanligare begrepp, vilket innebär att företag utnyttjar miljömärkningar för att få ett bättre anseende på marknaden och inte för att egentligen gynna miljön.

The Swedish production of biogas was 1,5 TWh 2011. About half of the production was used as vehicle fuels. The cost for upgrading biogas depends on the size of the biogas plant and its gas production. If the gas flow is low the cost will be high. However, further development of existing upgrading technologies or development of new ones, have good potential to decrease the upgrading cost for small scale biogas plants.