This report focuses on the upper slit. The upper slit is located between the impeller andthe drive unit. The slit design depends on pump type and application. However it isuncertain why the design varies, The purpose of this report is to clarify why the designvaries and to recommend an improved slit design.A research has been done; information was gathered from interviews, but also fromsearching of databases and studies of drawings, reports and documents. The originalpurpose of the slit was to prevent twining around the driveshaft, and prevent dirt fromentering the cooling system.

Within system development users have rarely been involved or received much attention during the development. Most of the times, the primary focus within system development lies on insuring functionality, rather than making the system usable. The literature specifies that a non user-centered approach can contribute to a product with low usability, which can lead to an ineffective and unsatisfactory experience for the end users.The purpose of this thesis is to begin an investigation to see if the use of non user-oriented system development methods is a possible cause of low usability in the final system.To achieve the purpose of this thesis, we have conducted a case study. Within the case study we examined the usability of a time reporting system. The case study included seven minor studies; an investigation concerning the development of the system, an expert evaluation of the system, interviews and observations of users, developed paper prototypes and executable prototypes, both which user testing was performed on.The result of this study shows that by working with user-entered methods, the usability in the time reporting system increased after the design had been revised.

Quickmatch is a company that recruits students to other companies that need temporary workers. Today all administration is done by hand, which is very time demanding and therefore inefficient. Employees send assignment reports by e-mail about the working hours and breaks to the administration office. Since these reports are handled manually, there is a great need for an automated system that makes the company more scalable.The purpose of this work was to solve the defined problem, i. e.

Consumers today leave a fragment of information when they pay with their debit and credit cards. The aim of our work is to investigate ways to design a concept of a system in which digitally stored information that today is fragmented among several different holders, can be assembled into a system and made available to consumers. In our study of how a system for financial flow of information should be designed, we intend to study the present situation and the attempts made to alter it into a more informative reality. We intend to investigate the flow of information when a consumer pays by card, and the possible solutions regarding the design and transportation of digital receipts. A majority of the information of our digital consumption is today handled digitally.

In the future network-based Swedish Defence (NBD), attaining information superiority will be of great importance. This will be achieved by a network of networks where decision-makers, information- and weapon-systems are linked together. As a part of the development of NBD, we have performed a study of user interface design for a future network-based tool package for analysis of sensor systems, referred to as the C2SR-system. This thesis was performed at Ericsson Microwave Systems AB, Sensor and Information Networks, during the autumn 2002. A pre-study concerning the requirements of usability, trustworthiness and functionality of a user interface for the C2SR-system was performed.

The shooting sport is one of the most widespread sports in the world and it isbeing practice in most countries. Based on their own experiences, in competition -and hobby shooting, the client M4Solutions found a demand and need for ashooting target that is manufactured in Sweden.The purpose of the project has been to develop, with the help of Marcus Walldén,two shooting targets from idea to finished product. These two shooting targets,Plate Rack Target and Dueling Tree, would each be equipped with a mechanicalresetting system but will in the future have the ability to be provided with anelectronic resetting system.The project from the client was divided into two theses. One of these two, writtenby Marcus Walldén, focused on the tripod parts and the overall design work forboth Plate Rack Target and Dueling Tree. The thesis that is presented in thisreport have focused on resetting systems, the design of protective plates and otherperipherals for both shooting targets.This work has primarily been in CAD environment where design, constructionand development has been given free rein.

Computer based information systems play an important role in modern military combat vehicles. The crew needs to be able to quickly get information about both the vehicle and its outer surroundings in order to quickly make the correct decisions. In this report, we describe the development of a prototype new information system for the BvS10 vehicle, manufactured by BAE System Hägglunds AB in Örnsköldsvik.An important aspect of the system is the time it takes from the point that the information is generated by the vehicle sensors until it is presented to the user. The system must be able to ensure that it never displays information that is out of date. Thus, it is important to create a layer and component based architecture for the solution, making it possible to control, in detail, the information?s age as it moves through the system.

Vårdsektorns IT-system fungerar inte optimalt ur användarsynpunkt då acceptansen bland de olika professionerna är låg.  När IT-systemen inte klarar av att stötta vårdaktörerna i deras dagliga arbete så kan det medföra en rad olika följder så som stress, tidsbrist och minskad patientsäkerhet. Därför ser vi att IT-systemen bör utvecklas ut användarsynpunkt för att klara av att fylla sin funktion som ett hjälpmedel i vården. Denna uppsats ämnar undersöka hur användarinvolvering vid systemutvecklingsprojekt i vården kan utvecklas. Genom en intervjustudie så kartlades den nuvarande situationen i vården. Med detta som utgångspunkt har vi sedan föreslagit tekniker och verktyg som kan hjälpa leverantörer och beställare att förbättra användarinvolveringen vid implementering av nya IT-system i vården.Nyckelord; IT-system i vård, användarinvolvering, Participatory Design, systemutveckling.

The purpose of this thesis is to describe what Building Information Modeling, BIM, could mean for landscape architects, and also hopefully to make sense of the possibilities and problems of the system. BIM is about virtual design and is based on all consultancy groups in the design team modeling in 3D. Intelligent objects and metadata, such as price and material, are used. The project group has a common interchange format for simple sharing of information. To get an idea of how the situation with BIM for landscape architects looks like today, I collected information mostly through interviews.

Problem: What are the characteristics of Polykemi?s management control system and how is it affected by growth? Purpose: To describe and analyse the management control system of a medium-sized family-owned company from the perspective of Simons? Levers of control. Research design: An abductive, interview-based case study of Polykemi AB. Conclusion: Polykemi?s management control system is primarily a traditional one which is rather strong in terms of Levers of control.

The background to this study is the government’s investment in design and the increase of design education around the country. As a future design teacher (industrialdesign) at high school/college, it is of great interest for me to look closer at student’s attitude towards design and design educations at high school.Questions that have been investigated are student´s attitude towards design; design as a concept but also as a phenomenon. How does the student counselor inform the students of the differentchoices before choosing high school?Does the students view on design correspond to what the student counselor say?What opinion does the student counselor have to the concept design as well as design in highschool? Is design just a craze or here to stay?To get answers I have made interviews with student counselors at two different schools, I have also been in contact with a student counselor on the internet. Their thoughts will clarify thesituation that the students might be in.

The task for this thesis is to design a tool that is used to cut-out preforms of thermoplastic adhesive and also to make an estimate of costs for the stamping tool. The tool is used in the repair process at the MCM production line. The result of gathered information has affected how the design of the stamping tool has developed. The handling of thermoplastic adhesive in the repair process is one of the factors that influenced the design. The adhesive is sensitive for exposure to moisture. Therefore an automated feeding system of the adhesive is not recommended. The users wished for an automated stamping tool.

This report describes the process of outlining a design proposal for a resource planning tool for TV post-production. A feasibility study in form of a participant observation has been carried out on-site, which has resulted in a requirement specification. Based on the requirement specification, mockups have been created to illustrate the functions and features that a final planning tool should have. In addition to developing a design proposal, an evaluation of the existing resource planning tool Ganttic has been conducted. Ganttic has been reviewed based on how well it meets the list of requirements.

The aim of this report is to see whether the graphic design of a game influences children?s will to play games. I am especially looking at minimalist graphic design and how well it works for a game aimed at children age 7-9. Does the style of the game design have any impact at all concerning the children?s wish to play the game or is the game mechanic all that matters.

The Work has been performed to, and in cooperation with Vetlanda Energi och teknik AB.District heating for commercial purpose started in the USA in 1877. Today the network has grown into big and complex systems, which demand maintenance and service to keep up the security of the delivery. When a district heating network expand, it becomes difficult to perform reliable calculations. For this purposes there are a few suppliers who design and deliver systems for documentation and calculation of district heating networks.Vetlanda Energi och Teknik AB is in the position where they must get a system for documentation and calculation for district heating, and therefore they need a basis to get a system. The target is to write a requirement specification that will follow the basis.The Swedish market has been inventoried, and suitable systems have been selected.