Visual Type Instrument - VTI, is a tool containing a typeface and a set of geometric calculations that generates numerical data in spreadsheets. The data is determined from the typefaces visual dimensions and is used to calculate leading, type size, margins and format. The aim is to offer, for all of those working with typography and design, a practical way to manage text, image and format in relationship to visual size. Instead of using point measurements, VTI uses a new device called Edo. An Edo is the same as one twelfth of a millimetre.

A case study of professional interaction designers' usage of design materials was conducted. Five interviews were performed in order to gain insight in the systems used by designers, how these work, how they collaborate within them, and what they think of recent research about them. Design studios allow collaboration for several users at once. Digital material (mockups, pictures, etc.) are commonly used, but needs to be made analog, e.g. printed, to be usable in the design studio environment.

I have always lived around mines and around people work­ing with mines. They are a natural part of my life and, inev­itably, a great interest of mine. When time came to make a decision for a degree project, focusing on the mine context felt as natural as breathing.In LKABs underground mines, safety in fire accidents is a great priority. Of outmost importance for the escape is to have a personal gas filter for filtration of smoke and/or gas. My design project resulted in a concept which is aimed at shortening the user journey from the start of the accident until the user has applied the personal safety solution and is ready to escape.Throughout the project I?ve been working with a context which is heavily regulated, and all problems are serious, important ones.

In the spring of 2009 Silva Sweden AB was contacted for a collaboration within the scope of a MasterThesis project. The company had discussed the possibility to develop a device that monitors usermovement during different types of exercise. The objective of this Master Thesis has therefore been todevelop and design a multi training device that records the user?s physical performance during severalactivities. The purpose of the thesis project has been to use scientific methods for product development inorder to design a multi device that supplements Silva?s range of products.The project followed a product development process divided into four phases; Market Analysis, ConceptCreation, Concept Development and Construction.

The purpose of this thesis is to study to what extent the methodological theories are being reflected in the construction of user surveys at public libraries in Sweden. The study has been conducted as a qualitative literature study in two parts. The first part is an examination of literature concerning survey methodology; the second part is a study of three user surveys conducted at Swedish public libraries after 1995. Our main results indicate that the theories about methodology are followed in part, though it cannot be determined whether this is due to any actual methodological studies, common sense, or just copying other surveys. In our study we have found some areas of user survey construction that need further attention and that would benefit from more extensive methodology studies on the part of survey designers.

The purpose of this thesis was to examine if there where fallacies in the design solutions for the business system IFS Applications from a user perspective, and if so, correct these from a cognitive science approach.Data collection consisted of three main portions. These where; workshop, individual interviews and observations. The collected data was analyzed and resulted in identification of two main areas in the application that where found lacking.The result of the study showed that the usability for processing large amounts of data and the lack of customization where the main flaws in the application. Two low fidelity prototypes where created with the purpose of rectifying the underlying flawed design solutions that where identified from the collected data..

In this Bachelor thesis I explore sound and room as elements in design of user interfaces, both theoretical and practical in a specific application domain, to identify some of the advantages and disadvantage associated with these elements. As application domain I studied email clients and their usage at home amongst students at Blekinge Institute of Technology. In the study I found an activity, which seems to be highly distributed in the physical room where the user is located. The activity was notification of email and could take place in an arbitrary location of the home. I then augmented this activity with ideas from my theoretical assumption about room and sound. The result was a rule-based agent for notification of email, which primarily uses sound as interaction style..

The division of Engineering Materials at Linköping University, department of Management and Engineering, conducted a research project concerning Fatigue life of thermal barrier coatings during 2009. During this project equipment to provoke these fatigue failure by rapidly heating and cooling test subjects in cycles, was ordered.Design and manufacturing of the equipment was handled internally at LIU.The equipment was built using a furnace that is lowered and raised over the table where the test subject is placed. To keep the temperature of the furnace a lid slides in place to close the downward facing opening of the furnace when it is in the raised position. On this door there is nozzle that is used to cooling of the test subject by air.To make sure that the equipment can work independently you need an automation controller that can evaluate if movement can occur without danger of collisions. The control system also needs to monitor that all elements are performed according to plan.This degree project is based on a modular system from OPTO 22 and includes the configuration of a PLC that will be supplied with logic and a user interface.The degree project resulted in a graphic interface in which a user can set desired values for different parameters and get information about current values for them.

E-Series 450 is a chainsaw designed by Husqvarna AB to the semi-professional user. Husqvarna is a world leader when it comes to chainsaws, trimmers, lawn mowers and garden tractors. The problem in hand can be addressed by the question. ?How easy can we start a chainsaw? The purposehas been to provide a solution to the question above and give Husqvarna a good base of which they can continue towards a finished product.

Design management är ett arbetssätt som har börjat tillämpas av allt fler företag de senaste åren, men det kan fortfarande vara svårt att förstå betydelsen av design management. I uppsatsen undersöks det vilken betydelse en design managers kompetens och position har för samarbetet mellan det designköpande företaget och en designkonsult under ett designinköp. Genom ett flertal intervjuer, utifrån både design managers och designkonsulters perspektiv, undersöks det hur samarbetet fungerar mellan dessa parter. En analys av intervjumaterial med hjälp av en teoretisk referensram bestående av design management-teori, design som en integrerad process och beslutsrollsteori har lett fram till ett antal slutsatser om design management. Några av slutsatserna är att design management, enligt teorierna, som arbetssätt inte är så vanligt och att det finns en viss samarbetsbrist enligt de intervjuade designkonsulterna, som i viss mån underlättas om design managern har kunskap om vad design innebär..

There are several methods and models within the areas of software engineering on how to proceed during a software development process. For each of these methods and models there are benefits and drawbacks, depending on how you choose to look at them. A difference of principle between the different models is that they either advocate iterative development or not. In parts of software engineering one makes use of different methods depending on which is most fitting in a specific situation. There are several methods on how to recieve more qualitative data from the end-users during the requirement collection, but the reappearing pattern is still user centric participation, which means that the user participates more actively in part of or the entire development process.

The aim of this study was to compare the Query-by-Humming systems Midomi, Musicline and Tunebot regarding their retrieval effectiveness. The aim was to see if there were differences between the systems but also between the user groups common users, musicians and singers. Query-by-Humming system means that the user sings a tune that the system then use to find the right melody.To compare the systems and their users, queries where collected from the different user groups and replayed for the systems. Mean Reciprocal Rank and Friedman test was used to do the comparison.The results showed that the system did not achieve equivalent and that there were no difference between the user groups. The Mean Reciprocal Rank showed that the systems had very different retrieval effectiveness, where Midomi was the system with best result and Musicline with the lowest result..

As organizations are generating more business intelligence in their systems, more employees need access those systems. As a result some sort of permission management needs to be implemented to ensure the information remain safe. Access Control Matrix (ACM) is one way of managing permissions and is widely used among organizations. The issues that comes with ACM is that the matrix itself gets difficult to manage and overview as its complexity increases with the number of permissions. The study utilizes Action Design Research to develop a tool for visualizing permissions.

E-Series 450 is a chainsaw designed by Husqvarna AB to the semi-professional user. Husqvarna is a world leader when it comes to chainsaws, trimmers, lawn mowers and garden tractors. The problem in hand can be addressed by the question. ?How easy can we start a chainsaw? The purposehas been to provide a solution to the question above and give Husqvarna a good base of which they can continue towards a finished product.

I detta kandidatarbete skapas en animation för att visualisera användarinstruktioner för en balpress. Förberedelser utförs i 3D-CADprogramvaran Geomagic Design 2014 innan arbetet med animeringen påbörjas i programmet SimLab Composer Animation. I förberedelserna rensas modellerna och modifieras. Modeller som saknas skapas. I detta förslag på visualisering av ett moment i användning av balpressen är i syfte att underlätta för brukaren hur den snabbt kan använda maskinen.