Landlocked Tajikistan is situated in Central Asia and is not only the smallest republic of Central Asia, but it is also one of the most mountainous with some of Central Asia?s highest peaks. Tajikistan is currently and historically the most financially disadvantaged country within Soviet Union/Russian territories. Agriculture is the main occupation for more than half of the country?s population. Unfortunately, however, only 7% of Tajikistan is arable land and the agriculture productivity is low.

A trend in modern landscape architecture is to design pedestrian streets so that vehicles and people move in the same area. By doing this, traffic tends to slow down. On the market though, there is a lack of furniture that corresponds to the requirements of these kinds of public places. Therefore, I have designed this furniture, called VOX, which is planned to be used on streets, schoolyards and squares. One objective has been to promote the product to the industry.To achieve this, I have been in contact with people from different professions, which have all influenced my designprocess.

Det har länge funnits en konflikt mellan kommuners vilja att förtäta staden och de som anser att förtätningen tar av stadens grönstrukturer. Denna uppsats har tittat närmre på denna konflikt och hur den tar sig uttryck i litteraturen och stadsbyggnadsprojekt. En av orsakerna till att denna konflikt uppstår är att strategiernaoch målen för att förtäta staden och för att öka tillgången på grönska hålls separata samt att förtätning ofta prioriteras högre. Då dessa ofta hålls åtskilda kan en av lösningarna på problemet vara att istället kombinera dem och dra nytta av alla fördelar. I likhet med hur Ebenezer Howard ville förena staden med landsbygden kan en av lösningarna på klimatförändringarna och utglesningsproblemen vara att förena förtätningsprojekt med grönstrukturer i olika skalor.

Milosevic, S. 2014. Buller ? Hur planers en bullerfri stad?. Kulturgeografiska institutionen, Uppsatser, Uppsala universitet. This essay is about noise pollution caused by urbanization.

This thesis describes the development of a tank insert for diesel cars, from idea to a prototype. The idea is to design an insert which makes it impossible to refuel petrol in a diesel car. The insert shall be installed in the existing tank opening on diesel cars. The tank insert is designed for the Swedish company SverigeGrepen AB located in Vänge, just outside Uppsala. Their main product is a pitchfork that is ergonomically designed and durable.A pre-study were performed in which information relating to fuel caps, tank openings, petrol- and diesel nozzles were collected.

The project was performed in collaboration with Husqvarna, one of the world?s leading manufacturer in the market of electric outdoor products. The report is a thesis work of a bachelor mechanical engineer program, in the field product development and design.The project is a study of the development opportunities within drive belt for a gear driven gearbox to one of Husqvarnas petrol powered hedge trimmers. A big part of the project was also to find combinations of materials for all components in the gearbox, to reduce weight and maintain or improve the performance of the system. Belt drive was of interest to investigate as an alternative solution to the current design that can reduce wear on the system at a performance test performed in the company before the product is released to market.

After contacting the company Elite Group Sverige AB, who sells strollers under the brand Crescent Baby, it was determined that the project group were to develop a three wheeled stroller which was going to be Crescents first own developed stroller. Only the frame of the stroller was considered within the demarcation of this project however care was taken to the placement of the carry-cot and the wheels etc. Crescent Baby wished for the frame would be smaller than the competitor Urban Jungle, that the frame would have at least three unique selling points and that the number of unique parts was to be minimized. The work began with information seeking regarding strollers, competitors, independent tests, European standards and consumer interviews. After that a number of concepts were developed and past to Crescent.

Today´s roofing of dwelling houses is a very time consuming procedure, which includes a lot of different steps on the construction site. Not only does it cost a lot of money, but often do problems with rot and mold occur in the attics of houses today. The use of prefabricated modules has seen a great breakthrough in the field of construction of dwelling houses; at least when it comes to foundations and walls, where this type of approach makes the construction process way more efficient. What no one previous has succeeded to develop is a corresponding system for roofs that meets the demands of a dwelling house. Accordingly the goal of PlusTak has been to come up with a proper module system for roofing of dwelling houses, where the roofing is completed to meet the demands of the Scandinavian market. During the project a lot of effort has been put into customer contacts and the usability of the product, as well in the manufacturing process as on the construction site. This development has gone hand in hand with several practical tests and tryouts.

Stadsförnyelse i innerstadsnära läge. Utarbetning av en strukturplan för stadsdelen Rothenburgsort i Hamburg..

This report covers a product development project conducted as Bachelor of Science thesis forthe Innovation & design engineer program at Karlstad University.The assignment was supplied by MMB Consulting, Kristinehamn. The purpose of this projectwas to find an alternative way of shaping wire-net insulation mats. This insulation product isused for fire and thermal insulation of technical installations. The insulation consists of stoneor glass wool with a sewn on steel wire netting on the out facing side. This netting has thepurpose to enable fastening to e.g.

Att arbeta med levande material i urban miljö blir alltmer till en utmaning för den gröna sektorn. Ett antal faktorer bidrar till att våra stadsträd för en tynande tillvaro eller dör i förtid. För att behålla våra städer gröna behöver vi dels en större mångfald av träd men även uppslag på nya och bättre anpassade arter. Syftet med detta arbete är att undersöka hur botaniska trädgårdar kan fungera som en källa till kunskap och erfarenhet för att utveckla trädanvändningen i urbana miljöer. För att kunna svara på frågan valde vi att undersöka tre botaniska trädgårdar i Sverige. Lunds botaniska, Göteborgs botaniska och Bergianska i Stockholm har ingått i studien.

This study presents a survey of the seroprevalence of Toxoplasma gondii and Neospora spp. in equids in three municipalities in Pará, a Brazilian state with the Amazonian rainforest and the Amazon River as dominating features. Toxoplasma gondii and Neospora spp. are two closely related parasitic protozoans not separated as different genera until 1988. Neospora spp.

Begreppet biologisk mångfald har länge förknippats med bevarandefrågor som identifiering av skyddsvärda arter och upprättande av reservat. På senare tid har det dock allt oftare hörts tillsammans med begrepp som ekosystemtjänster, och då inte sällan i urbana sammanhang. Som blivande landskapsarkitekt känns det relevant att bredda förståelsen för hur man kan arbeta med ekologiska aspekter och därigenom biodiversitet i en tid som präglas av ett tätt och kompakt stadsbyggande. Detta kandidatarbete fokuserar därför på det utrymme den biologiska mångfalden kan tänkas ha inom urban planering, samt framförallt hur man mer konkret kan skapa stadsmiljöer som också hyser en rik biodiversitet. Två stadsutvecklingsprojekt där man arbetat med biologisk mångfald är Bo01 i Malmö och Norra Djurgårdsstaden i Stockholm. För att hantera frågan i ett planeringsskede har man i båda dessa fall använt en så kallad grönytefaktor, vilken syftar till att öka de ekologiska förutsättningarna genom ett poängsystem för gröna och blå kvaliteter. I Arbetets teoretiska del beskrivs den biologiska mångfaldens värden, i allmänhet och i en urban kontext, samt begreppets komplexitet och den problematik som kan uppstå kring otydliga definitioner. Därtill redogörs för planeringsverktyget grönytefaktor. En genomgång av Bo01-projektets arbete med ekologi och biodiversitet visar på höga ambitioner men varierat resultat.

Extended Producer Responsibility (ERP) is a form of product take-back regulation that requires the producers to manage their products at the end of life. By internalising the products? entire life cycle costs into the market price the ultimate objective of such regulations is to reduce the environmental burden from the products. This Master´s thesis seeks to examine if the total life cycle cost of a product actually is borne by the producer, and if not, predict who will then take this cost. This is done by analysing the market for take-back activities in three different categories of products; electrical and electronic equipment, cars and wind power stations.

We came in contact with the project "Grönplan Danderyd" that aims to create a green structure plan for a municipality of Stockholm called Danderyds kommun. Our thesis is a part of this project and makes it's contribution through the gathering and systematization of the knowledge of the functions of an urban green structure. It also makes a contribution through suggesting how this knowledge can be applied during the construction of an urban green structure plan. We found that "Stadens parker och natur", published by the Swedish National board of Housing, Building and Planning, was a recurrent source of information in the green structure plans that we studied. We saw a need of complementary additions and updates to the rather old report and found literature that adds the developments of the last decade. First of all we have chosen to make themes based on the functions of a green structure that were presented by 'Stadens parker och natur'. The themes we suggest that a greenplanning document manage are: Recreation, Pedagogies and Heath, Biological Diversity, Green structure in the History of Building Cities, Cultural Identity, the Health of the City, Biological Technology in the Municipality and Use and the Users. We found good examples of how to handle these themes in documents that handle greenstructure planning from the municipalities of Göteborg, Strängnäs, Eskilstuna, Malmö, Lund, Västerås and Uppsala.