The aim: was to describe and compare a group of experts and critical care nurses' agreement in detecting delirium in intubated, ventilator treated patients with sedation / analgesia, before and after an in house training intervention with the instrument Confusion Assessment Method for the Intensive Care Unit (CAM-ICU).Method: A quasi-experimental study, one group pretest - posttest design. A convenience sample of 17 critical care nurses in a general intensive care unit included. To detect delirium the instrument CAM-ICU was used, 21 paired tests before and 22 after an educational intervention.Main Results: The results showed that after an in house training intervention sensitivity and kappa coefficient improved of the characteristic 1 "acute onset and fluctuating course," an improvement that was significant. In other features, and overall values were signs of numerical improvement and deterioration in sensitivity, specificity and kappa coefficient but no significant change.Conclusion: Implementing a new instrument for detecting delirium in clinical practice requires education and follow-up. A small sample of critical care nurses with varying ability to use the new instrument and the fact that patients' status may change rapidly making it difficult to draw any conclusions from this study.

With gas prices persistently rising, electric and hybrid vehicles are getting more and more common and in recent years several new electric cars have evolved on the market. Although the energy consumption and low emissions are a huge benefit of the electric cars, they inevitably suffer from high prices, short range and time consuming recharging periods. To be able to withstand the competition it is important that electric vehicles not only can withstand general were and tare, but also the harsh conditions that ordinary cars is exposed to in daily usage. The purpose of this project is to develop a test methodology which replicate situations that could appear in daily usage of electric or hybrid cars and to understand the problems related to usage of electric cars in winter conditions. This paper also discusses the major differences between hybrid cars and electric cars.

Galna Glassen is a company that has a unique way of selling ice cream in Sweden. The idea is for the costumer to be able to compose their own favorite ice cream, partly by choosing the flavor of ice cream but also by picking the ingredients. The ingredients that can be chosen from are around twenty and can be everything from cookies to candy to berries. When the costumer has chosen their ice cream and ingredients they are mixed together on a cooled granite board.The company was very successful when it was founded in the summer of 2011 and decided to expand to other cities in Sweden. They also wanted to explore the profitability of a mobile sales unit that is intended for festivals and events.The thesis is meant to develop Galna Glassen?s mobile sales unit.

This report contains a programming improvement work in a LabVIEW? fire testing furnace control system for SP Fire Technology in Borås. Here materials and products behaviour are tested and evaluated, being exposed to fire. For this task, UGNET is being used for control and surveillance of the testing furnace system. System hardware has been updated gradually through the years, while the software has been neglected.

Rörelseanalys är ett nödvändigt verktyg då det gäller bedömning, uppföljning och diagnos vid alla de sjukdomar som påverkar den mänskliga rörelseapparaten. Idag finns det i Sverige ett fåtal kliniska gånglaboratorier dit patienter kan remitteras för att få en mer detaljerad och objektiv bedömning av deras rörelsemönster. Problemen med dessa gånglaboratorier är att de är förhållandevis dyra och resurskrävande.Avdelningen för Medicinsk Teknik- FoU vid Norrlands Universitetssjukhus har därför initierat ett forskningsprojekt där AnyMo, ett mobilt system för mätningar av rörelsemönster, har utvecklats.Målet med detta examensarbete var att vidareutveckla det befintliga systemet till att simultant kunna mäta hjärtats EKG, då det skulle göra undersökningen mer komplett.De delar som konstruerades i projektet var en EKG-sensor och en Master Unit, som kopplades ihop med en befintlig rörelsesensor (del av AnyMo-systemet). Informationen från sensorerna lagrades lokalt i ett minneskort på systemets Master Unit.Den färdiga produkten testades och utvärderades på en motionscykel vid olika nivåer av fysisk ansträngning och varierande rörelsefrekvens..

This thesis is basically a design project aimed to find a safe and reliable automatic safety device, which is designed to be suitable for highly automated industrial situations. This device fits with ABB / Jokab Safety?s fence systems. These are built up around machines to create safety distances. The automatic protection device assist the operator in situations when loading or going in and out of the danger zone.

Denna studie undersöker om det är möjligt att införa nåbarhetstestning i en baneditor. Testets syfte är att ersätta manuell testing, det vill säga att bankonstruktören inte ska behöva spela igenom banan för att säkerställa att denne kommer kunna nå alla nåbara positioner.För att kunna utföra studien skapas en enkel baneditor som testplattform. Vidare utförs en jämförande studie av flera alternativa algoritmer för att fastställa vilken som är mest passande för nåbarhetstestning i en baneditor.Resultatet från den jämförande studien visade att A* (A star) var den mest passande algoritmen för funktionen. Huruvida automatisk testning kan ersätta manuell testning är diskutabelt, men resultatet pekar på en ökad effektivitet i tid när det kommer till banbygge..

This report summarize what have been done during the Master of Science Thesis that Klas Schjelderup has written for the company RANOTOR Utvecklings AB. The company is developing modern steam engines and this work should develop a machine to perform tests on a new type of piston seal that hopefully could be used in the future. The steam engines will be both volumetric and energy compact, around 1600hp/literof cylinder volume, and it will have a lot of practical applications.The new type of piston seal is hydrostatic lubricated which means that a fluid is separating two faces that normally is in contact. In this case pressurized water is used to separate the piston seal from the cylinder wall. RANOTOR have earlier formulated that at least the expander in the modern steam engine have to be oil-free, due to other components functionality in the closed water system.

This report is a documentation of the workflow and the result of a project carried out by twostudents from the Royal Institute of Technology in collaboration with a company. The report isstructured in a chronological order and describes the methods and systems developed in theworkflow. The report shows how the project evolved from a study phase to the various proposals onthe concept solutions.The project aims to develop a systematic way of bonding two different kind of cardboard under fiveminutes. By conducting a general study about glue and its different forms it was possible to obtain abroad knowledge, which helped to choose the right substances to later use in testing on the differentcardboard materials in question. Glues's survey resulted in a list of different substances that wererelevant to the project.

This master of science thesis is focusing on how the fault handling on hardware connected toa control unit on a Scania vehicle is working. To the hardware counts buttons levers, sensorsand CAN. The work has been concentrated upon how the fault handling is working and if it ispossible to find any new fault modes.The control unit that has been studied is called the Coordinator and is the core in Scanias threenetworks of control units. The Coordinators work is to transmit messages between the threenetworks and to process signals from buttons, levers and sensors. The values is then usedinternally or is sent to other control units on the CAN networks.

The aim of this study was to examine how heads of unit in charge of personal assistance (PA)for the disabled experience and handle ethical dilemmas and situations within theirworkgroups when The Work Environment Act and The Swedish Act Concerning Support andService for Persons with Certain Functional Impairments collide with each other. The methodof the study was to use semi-structured interviews based around three main topics; the head ofunits opinions about the value and purpose of The Work Environment Act in theadministering and implementation of personal assistance services, the problem solvingprocess and the head of units own individual experiences of ethical dilemmas or workenvironment-related conflicts or situations within their workgroups. Four heads of unit wereinterviewed for this study. The results of this study showed that the interviewed heads of unitexperienced a lack of clear and factual information about how they were meant to solvedilemmas emerging from the two laws conflicting with each other regarding the rights of thecare recipient to layout their personal assistance to their liking, versus the rights of thepersonal assistant to have acceptable working conditions. The heads of unit could not rely onlegislation and/or other specific directive documents when work environment-relatedproblems arose.

This thesis contains a usability evaluation of ?Barnplay?, a Swedish video-on-demand service targeted at children. The objective of the study was to identify usability issues in the video service and to develop measures on improving the user interface, with special focus on adaptation to the broad target group of 3-11 year olds.The study was conducted by first mapping established practices in designs of VOD-services targeted at children, followed by interviews and usability tests with children between 2-11 concerning their use of ?Barnplay?. Based on the initial data collection, a prototype was developed and then evaluated by usability testing and A/B-testing.The main conclusion of the study is the need of better individual adjustment of the video content selection to better appeal to different age segments within the target group.

Formulation and testing of a new type of chainsaw lubricantThe company Agro Oil has come up with the idea of developing an environmentally adapted chainsaw lubricant with a new unusual base fluid. A field test with a tree-harvester shows unsatisfactory low temperature properties and high wear. In this work the viscosity, price and pour point of different combinations of the given base fluid and three other base fluids have been investigated. Desired viscosity and price are determined for different formulations. The new lubricants tested show lower pour points than almost all products on the Swedish market.A test equipment has been developed to investigate the wear.

The leadership within healthcare is a constantly discussed subject. The discussion today is evolving around the physicians' lack of strive towards becoming managers within healthcare organizations. Furthermore the leadership that the nurse practice when becoming manager is on the other hand not discussed. The purpose of this study is to describe important factors of the leadership the nurse practice upon physicians in a healthcare organization as well as to explain why that is. To fulfill this purpose, we have used a qualitative case study research design including a private Swedish healthcare company.

Abstract The purpose of this project is to develop a modular processor card which is intended to work as a platform for Kitron Development Karlskoga. The modular processor card is meant to be used as a control system in development projects, mainly in medical and industrial products. The processor card will consist of a central unit with the basic functions for a control system. Furthermore there will be complete modules with machine commodity and programming, to pick exactly the necessary functions for a specific application. With consideration to the specification of the development and the main unit, I chose an adequate microprocessor (AT90CAN32) as core and interface circuits to stated border areas. The construction is first completed in the program MultiSim and then remade in the program OrCAD Capture. The programming language C was used in the software model.