This thesis has been adjusted because some parts are classified, some sentences might have been changed. Electric bikes are a convenient mode of transport, a good choice when long distances or tough slopes can be an obstacle.The goal of the project was to create a prototype on a locking mechanism with an inductive charger for electric bikes.The idea behind the project was to develop a user-friendly locking mechanism, where the bikes would be charged inductively when they were locked. To implement the project facts about induction, battery charging and locking devices was needed to be acquired. Circuits for induction charging were created and a lock device was constructed. A microprocessor was used to control the entire system.A prototype was designed with a locking device and an inductive charger fixed in a bike rack.The entire project became very wide which resulted in that not all of the parts of the project could be completed.

This paper is the result of a case study conducted at Uppåkra Mekaniska AB during the spring of 2006. The task that was presented by Uppåkra was to develop a basis for a decision for the planning activities at the company, so that in the future they can create lot-sizes which are based upon a total cost perspective. Total cost in regards to lot-sizing is defined as the sum of the administrative reordering costs and warehousing cost per stock keeping unit.To collect data a series of interviews and observations were conducted. This data was then used during the lot-sizing simulation and analysis. The 15 units that the simulation was conducted on were grouped into three item classes depending how many different machine setups they required during the production process.

The aim of this paper is to examine whether the theory of cosmopolitan democracy provides a satisfactory solution to the boundary problem in democratic theory. I argue that David Held's version of cosmopolitan democracy rests on two incompatibleprinciples: the all-affected principle and the all-inclusive principle. However, the theory does not need to presuppose both these principles; it requires only one of them.Furthermore, I try to show that both of these principles fail to provide an adequate solution to the boundary problem. The all-inclusive principle suggests that all citizens of the world should be included in a global democratic unit. I argue that such an ideal is not desirable since it conflicts with the principle of subsidiarity and withdraws from regional political communities their sovereignty.

Studies show that older is an increased proportion patients in hospital and that it is a patient group that can be difficult to communicate with because of older patients' often multiple disease picture. Relatives to the patient can be help for caregivers in the communication and the care of the patient. The aim with the study was to examine relative's experience of participation, meeting/support, accessibility and information on a geriatrics rehabilitation care unit. The study had a descriptive design and was designed as a questionnaire study. It was implemented on one geriatrics rehabilitation care unit on the countryside in central Sweden, belong to Uppsala University hospital.

This essay is about the asylum and immigration politics within the EU. Due to the heavy criticism the EU has been exposed to from among others different kind of human rights organizations I have become interested to find out what kind of asylum and migration politics right now is being formed by the member states of the union. Thus the purpose is also to see if the EU is creating a policy within this area that intends to live up to the human rights obligations.My overall research question is:Which ideas characterize the asylum and immigration politics within the EU?The theoretical perspectives of universalism and particularism are used as two analytical tools in order to understand the phenomenon I am investigating and to identify its characterizing ideas. In my essay universalism and particularism are used as opposite ideal types.

AN EVALUATION OF EFFA-VÄSTERS PARENT PROGRAMME FOR PARENTS WITH CHILDREN 2-4 YEARS- A qualitative and quantitative research focused on content, effects and implementationAuthors: Fritz, Jesper & Johansson, LinaSupervisor: Koutakis, NikolausÖrebro UniversityAcademy of Law, psychology and social workSocial Work ProgramSocial Work 41-60 pointsC-essay, 15 pointsAutumn term 2008AbstractThis study is written on commission by The Unit for prevention which is a part of the Social welfare Services in the district of Örebro. The social work practice carried out by the unit is based on universal prevention, which includes providing parent programmes. The aim in this study is to describe and evaluate the EFFA-Väster parent programme, which has been compiled by social workers working at the unit, with regard to the content, effects and implementation of the program. The study is based on a non-experimental inquiry of an experimental group which has been subjected to a pre- and post test. Further, observations has been made of every program session to examine whether the program is implemented in accordance with the intention and how the program is received by the participants.

It's an everyday experience shared by many that nature can be of help in relieving pain, reducing stress, support mental recovery etc. In the last three decades or so this experience has also found support in a large number of scientific investigations. Among other things the experience of nature has been shown to reduce stress and pain in patients and to boost concentration and reduce impulsive behavior in children. Most of this research however has mainly been concerned with the visual modality. In this thesis the aim has been to focus on the auditory modality in this context by trying to reveal some effects on people from the exposure of nature sounds played indoors in three different environments: a grammar school class room, a kindergarten play room and a post-surgery wake up room at an intensive care unit.

Leisure boats of today have a lot of electronics that needs battery power to work. In additionto that electric propulsion systems have gotten more popular lately, which further increasesthe demand for high battery capacity. The batteries used are mostly lead-acid batteries and toget the most out of the batteries it is important to treat them right. To optimize the electricsystem it is important to have knowledge of how the batteries and the electric motor are usedand which factors affect e.g. efficiency and recharging.A new electric drive that can replace old diesel engines is being developed and needs testingand evaluation.

This thesis has been adjusted because some parts are classified, some sentences might have been changed. Electric bikes are a convenient mode of transport, a good choice when long distances or tough slopes can be an obstacle.The goal of the project was to create a prototype on a locking mechanism with an inductive charger for electric bikes.The idea behind the project was to develop a user-friendly locking mechanism, where the bikes would be charged inductively when they were locked. To implement the project facts about induction, battery charging and locking devices was needed to be acquired. Circuits for induction charging were created and a lock device was constructed. A microprocessor was used to control the entire system.A prototype was designed with a locking device and an inductive charger fixed in a bike rack.The entire project became very wide which resulted in that not all of the parts of the project could be completed.

Simulation is a vital tool during development of JAS 39 Gripen, since money and time can be saved.The Auxiliary and Emergency Power System, AEPS, is a subsystem of the secondary power system in Gripen. It has the function of providing the aircraft with electrical and hydraulical power before activation and after deactivation of the main engine. The system also functions as backup in case of a safety critical problem in the main power supply system. The system basically consists of a control unit and an auxiliary gearbox. The gearbox is driven by an air turbine.

ObjectiveThe aim of this study was to explore nurses' experiences of informing relatives to critically ill patients in the intensive care unit (ICU).MethodThe study was descriptive with a qualitative approach. Nine nurses were interviewed. The study took place in a university hospital in the midst of Sweden. An interview guide was used, designed in consensus with the study questions. Data was analyzed via qualitative content analysis.FindingsMeeting and preparing relatives at the arrival at the ICU seemed valuable and led to safety and participation among relatives.

Bakgrund: Internet har skapat nya och billigare sa?tt fo?r konsumenter att genomfo?ra ko?p samt att so?ka efter information. Konsumenter a?r da?rfo?r sva?rare att beha?lla i det nya affa?rsklimatet. E-lojalitet beskrivs som den viktigaste faktorn fo?r e-handlare da? det skapar lo?nsamhet och ho?g avsikt fo?r upprepat ko?p.

The study was carried out at the Kungsängen Research Centre, Department of Animal Nutrition and Management, Swedish University of Agriculture Sciences, Uppsala. The technical development in dairy production has resulted in a housing system where feeding and milking is done automatically without human contact, a so called automatic milking system. The motives for utilising an automatic milking system, is to increase the animal welfare and to decrease the need for manual labour. However, the system does involve a change for the animals, among the effects is the deprival or the diminishment of a chance for synchronous behaviour and the animals have to agree among themselves in which order they use the feeding stations and the milking unit itself. How and if this affects the animals well-being and production is yet to be solved. A possible way to form an opinion on this, is to study the animals ranking order along with hormone profiles and production. The purpose of this work was to study the effect of low- vs.

This report is the result of a thesis performed at Westermo Industrial Ltd with its headquarters in Stora Sundby and it sums up the author's studies for University Engineering in Innovation, Production and Logistics at Mälardalen University.The main goal of the thesis was to identify problems and suggest actions that lead to the reduction of the repair time from 3 weeks to 2 weeks. The key questions that were answered in order to achieve the thesis objectives are: What are the biggest challenges that make the repair process time last for 3 weeks? What are the necessary means and measures in order to reduce the repair length to 2 weeks? The author adjusted the work to the Swedish repairs, repair issues that arise from sell unit Westermo Data Communications AB with its office in Västerås and performed the status report by mapping the repair process, through using observations, interviews and bibliography research studies. A flow map of four sub-processes (Inbound Delivery, BackOffice, Repair Department, and Logistics) was made and each section was observed, where also the employees were interviewed. Data that has been collected was analysed by the author and the decision to execute a workshop that affects Repair Department and Logistics was made.

This master's theses was carried out on assignment from Stockholm Vatten AB as a part of a project developing new waste water treatment techniques. The goal of the theisis has been to evaluate an anaerobic membrane bioreactor for treatment of waste water from Hammarby Sjöstad. The bioreactor has not been heated and the main interest has been to study the gas production, power consumption and the reduction of organic matter and nutrients.The system has been completed with a reverse osmosis unit and a total of four batch runs have been made with good results. The use of reverse osmosis allows nutrient in the waste water to be reintroduced into circulation as the reverse osmosis concentrate can be used as crop nutrient.The membrane unit is of VSEP ("Vibratory Shear Enhanced Processing") type and an extensive membrane test has been conducted. This so called L-test helped determine the most suitable type of membrane for the system to allow a higher ±ux and thus lower power consumption.