The main goal of this project was to develop some sort of a diverter for pipestransporting waste in a vacuum system. This unit was supposed to be both cheap andeasy to serve/exchange worn out parts. With a limited space to install the pipeexchanger, the challenge was to keep it as compact as possible without constructingbends with to small radius or to sharp angles as this would wear out the system a lotfaster than planned. The system was also supposed to be able to handle clothes andscrubs from hospitals. Having too much sharp edges or angles would tear the clothesapart.

Delirium är ett vanligt tillstånd på intensivvårdsavdelningen (IVA) och forskning visar attpatienter som drabbas av delirium har högre mortalitet, längre vårdtider på sjukhus och sänktlivskvalitet lång tid efter vårdtiden. Det finns olika former av delirium: hyperaktivt,hypoaktivt och blandformer. Den vanligaste formen, hypoaktivt delirium, är lätt att feltolkasom översedering eller depression. Att använda sig av bedömningsinstrument kan göra attdelirium upptäcks tidigare och att patienten snabbare får adekvat vård, vilket kan lindraförloppet. Det har utvecklats olika instrument för att bedöma om patienterna har delirium.Syftet med denna studie var att undersöka om användandet av CAM-ICU (ConfusionAssessment Method for Intensive Care Unit - ett bedömningsinstrument av delirium) är ettanvändbart mätinstrument för sjuksköterskan att upptäcka delirium hos patienter som vårdaspå IVA.

Introduction: The complexity of the neonates? way of expressing pain is a difficulttask for the pediatric nurse. The Swedish national guidelines for prevention and treatmentof pain in the newborn infant is suggesting that departments regularly use structuredmethods, such as pain assessment instrument, for the assessment of pain in the neonatalperiod. Previous research shows that pain assessment instruments are only used in abouthalf of all pain assessments in Sweden. Neonate's cannot verbally communicate their pain,and are therefore dependent on the pediatric nurse to acknowledge the pain.

Detta examensarbete har som mål att slutföra konstruktionen av en testrigg för provning hydrauliska tätningar. I riggen ska tryckfördelning över tätning, avstrykare och styrring kunna mätas. Testriggen togs ursprungligen fram på uppdrag av Sealpool, Hydrauto, Parker Hannifin, Volvo CE och IFS för att kunna bestämma livslängden hos hydrauliska tätningar. Det arbete som utförts har bestått av att montera trådar av manganin i ett trådgnistat spår. Sedan har en mätbrygga konstruerats och tillsammans med ett mätprogram i LabVIEW och en lock-in-förstärkare har resultat kunnat nås Syftet med arbetet var i första hand att få fram en fungerande mätmetod.

Title: Collaboration in BoDa-units. A qualitative study about collaboration regarding people with disabilities. The purpose of this thesis was to internally examine the cooperation between different professions in municipal BoDa-units. By doing a qualitative study using focus-group-interviews in three municipalities, we were able to examine the personnel?s experience of cooperation issues and opportunities in BoDa-units.

The Psychology Driving and Barriers to Skunk Work Projects (referred to throughout this thesis as the paper) represents a study predominantly on Tetra Pak from a selective perspective, the innovators. Innovators both past&present whose initiatives contribute to the well being of Tetra Pak as well as one from Ericsson were consulted. As with individuals, organizations possess definable characters that are influenced by the various stages of their life cycle. Theories of corporate life cycle phases and organizational character analysis were therefore employed to identify and explain organizational barriers to skunk work leaders&managers. Predicated on the Organizational Character Index survey developed by William Bridges PhD (himself a recognized leader in the field of transition management) and administered to sixty-one managers within a Tetra Pak business unit established the benchmark.

Transdermal drug delivery, besides painfulinjections with syringes, has long been associatedwith small size particle pharmaceuticals, which candiffuse through the skin. This method of drugadministration has only been applicable on a smallnumber of drugs, where active molecules are smalland delivery time should or can be long.Other drug delivery options are oral administrationand injection with hypodermic needles (ordinaryhospital syringes). In oral administration thestomach and liver tend to dissolve the drug and theeffect becomes more difficult to anticipate, anddrug delivery rates difficult to control. Hypodermicneedles are used as a mean of drug injectiondirectly into the bloodstream. This method ispainful and risks infection due to tissue damageand skin penetration.One way to get a painless non-damaging techniquewith high delivery rate that still can delivery largemolecules is to manufacture an array of microscopichollow needles and equip them with a pumping unitthat delivers the correct amount of drugs.This thesis shows the technique and possibility ofmanufacture micromachined needles using low costtechniques of Ion Track Technology (radiation ofheavy ions creates porous materials), electrolessdeposition (non-current activated wet chemistrymethod of depositing metal) and electroplating.

The purpose of this paper was to examine how clients on the unit for adults at Södemalms district administration (Stockholm, Sweden) with severe mental illness and substance abuse differs from other clients with substance abuse at the baseline and at follow-up one year later. We have used a quantitative method and analyzed material from ASI-interviews performed at the adult drug abuse unit at Södermalm during the time period 2002-2010. At the baseline the clients with substance abuse and co-occurring severe mental illness have more problems than other clients, primarily in the area of mental health. They spend more time alone and are more likely to engage in illegal activities. Interviewers assess their situation as more serious and that they need more help in all of ASI's areas of life than other clients.

This masters thesis concerns a modeling project performed at Volvo Technology in Gothenburg, Sweden. The main purpose of the project has been to develop a physical model of the climate in construction vehicles that later on can be used in the development of an electronic climate controller. The focus of the work has been on one type of wheel loader and one type of excavator. The temperature inside the compartment has been set equal to the notion climate. With physical theories about air flow and heat transfer in respect, relations between the components in the climate unit and the compartment has been calculated.

The aim: was to describe and compare a group of experts and critical care nurses' agreement in detecting delirium in intubated, ventilator treated patients with sedation / analgesia, before and after an in house training intervention with the instrument Confusion Assessment Method for the Intensive Care Unit (CAM-ICU).Method: A quasi-experimental study, one group pretest - posttest design. A convenience sample of 17 critical care nurses in a general intensive care unit included. To detect delirium the instrument CAM-ICU was used, 21 paired tests before and 22 after an educational intervention.Main Results: The results showed that after an in house training intervention sensitivity and kappa coefficient improved of the characteristic 1 "acute onset and fluctuating course," an improvement that was significant. In other features, and overall values were signs of numerical improvement and deterioration in sensitivity, specificity and kappa coefficient but no significant change.Conclusion: Implementing a new instrument for detecting delirium in clinical practice requires education and follow-up. A small sample of critical care nurses with varying ability to use the new instrument and the fact that patients' status may change rapidly making it difficult to draw any conclusions from this study.

Efter omfattande kritik mot det svenska häktningssystemet från EU och FN beträffande brott mot FN:s mänskliga rättigheter riktar sig denna studie till att undersöka hur detta ter sig på närbyråkratsnivå. Syftet med denna undersökning är att utifrån implementeringsteori studera förutsättningarna för kriminalvårdare som arbetar på svenska häkten att implementera FN:s mänskliga rättigheter i den dagliga verksamheten och arbetet med de intagna. För att genomföra detta har kriminalvårdare vid svenska häkten intervjuats utifrån huruvida de förstår, vill och kan följa FN:s mänskliga rättigheter. De slutsatser som framkommer är att kriminalvårdarna har en god förståelse kring FN:s mänskliga rättigheter. De har också viljan att efterleva dem även om motiven är av olika slag.

The topic of this essay is the strategic importance of the Golan Heights during the period 1967-1973, specifically targeting the following questions;-          Why were the heights strategically important?-          What are the gains of either of the states in controlling the Golan Heights?A theoretical framework based on Jerker Widén´s and Jan Ångström´s Militärteorins grunder (The fundamentals in Military Theory) and its chapter regarding the strategic context will be used as an analytical framework.The framework has been applied on the specific conditions of the Golan Heights during a given and limited period of time; stretching from 1967 to 1973, however, the study will not deal with the war of attrition in 1970 as the impact on the Golan Heights and the surrounding geographical strategically important area was limited if at all. The two wars waged during this particular time are used in an attempt to give a somewhat objective picture of the strategic importance of the area.The conclusions are that the importance of the Golan heights during the selected period was significant as the Golan Heights provided a ?strategic lock? both ways and provides a favourable area to deploy artillery, intelligence and surveillance sensors..

The purpose of this essay is to develop knowledge about how learning among employees is perceived to occur practically in a pre-school unit seen as a learning organization. From an employee perspective the intention was to gain an understanding of how they perceive the organization regarding employee learning in the workplace when it comes to in which contexts and what conditions that enable collaborative learning. Because learning organization is mostly a vision from a management perspective thereby it should in this case mostly be viewed as the context in which the employees work in.The essay is based on a qualitative research approach with eight semi-structured interviews. It was based on hermeneutics as method of analysis with the intention to gain an understanding of the employees' subjective perception. It is a case study on a selected pre-school unit in Stockholm.

Robotic milking in Automatic Milking systems (AMS) is proposed to reduce manual labour and at the same time increase milk yield by increasing milking frequency. In order to increase milking frequency, it is essential to have well-functioning cow traffic. Investing in an AMS is a great capital investment for the farmer, thus it is of major importance to ensure maximal AMS capacity. This study investigated the effect of the traffic systems Feed First? and Free cow traffic with and without waiting area (WA) on cow performance and AMS capacity.

AbstractIn urban societies people spend more and more time indoors, which put great demands on the indoor environment. If the ventilation is to manage the removal of unwanted substances in the indoor air, a good mixing of the air is required. The question arises that, whether the buoyancy forces will counteract a good mixing of the indoor air or not?This report aims to clear up the difficulties whether you need to consider the buoyancy forces or not, when adjusting a ventilation unit. For studying the indoor mixing of the air a two dimensional model is constructed in COMSOL Multiphysics.