Due to the globalization today the competition in the market has in- creased and it requires flexibility and produce according to customer demand. In order to reduce the cost of wages industrial companies are now considering moving the manufacturing to low-cost countries. To keep up with the competition in the market without moving the manu- facturing abroad, Lean Automation was developed. The concept of Lean Automation is to reduce the perceived complexity with automa- tion and make automation available for new users and in new applica- tions.Haldex Brake Products are situated in Sweden and want to maintain the manufacturing of the automatic brake adjusters in the country. It is a product well-known and highly exposed to the competition in the mar- ket.

This report presents a master thesis project performed at Elekta AB during the fall of 2013 and early 2014. Elekta is a medical technology company and their main product in the Stockholm office is a gamma knife used for radiosurgery. The gamma knife contains a cluster of a dozen motor servos and motors used for adjusting the patient and the radiation sources over a CAN bus. A self-developed hardware-in-loop simulator running on a PC with LabVIEW is currently being used for integration level testing of the control system of the gamma knife. The simulator has some problems with it not running in real-time and having other performance issues.

While the technological infrastructure that enables collaboration between municipalities, counties and private health care providers improves, so does the need for health-care providers to gain access to the right patient journal at the right time. For doctors, nurses and other health-care organization employees this goal is achieved by NPÖ, National Patient Summary. NPÖ effectively enables health-care records to be shared across organizational boundaries. This thesis is based on a demand by a mobile application that can give district nurses access to health-care records wherever they are.This thesis describes the development of a prototype of a mobile application aimed for NPÖ. This includes investigating a suitable mobile platform, investigating available card readers for reading electronic identification from SITHS cards and the ability to connect to external services such as NPÖ.

This thesis describes how the chip space and coolant channels are designed in today?s mills, the ideas behind the design and what is considered to be the best method of cooling. It contains ideas on how the chip space can be simplified. It contains several concepts on how the cooling could be designed for better efficiency and manufacturability. There are also suggestions on how the cooling could be stopped when the cutter isn?t cutting.

This report is about finding the cooperative elements in games and making a boardgame based on them. I tested different computer games and boardgames to try and get the cooperative elements and then I make a boardgame based on what I found.What I found during testing is that to be a fully cooperative game all players on the same team must win or lose together and one player should not be able to finish the game by herself. There are of course some things that can change this for example what kind of players are playing.My best advice is that you should decide that the game is fully cooperative from the beginning and build the game from that..

Due to increasing product availability and higher demands on fast deliveries, the competition between companies is growing. To be able to satisfy the customers? requests an efficient logistics system with short throughput time is required. By using tools associated with Lean production companies are able to make great improvements in their manufacturing systems and reduce lead times to satisfy customer demands.There are two classifications associated with manufacturing, high variety and low volume (HVLV) and low volume and high variety (LVHV). The general belief is that the concept of Lean production is difficult to implement in a production environment with high variety and low volume due to the concept being adapted to mass production.

When performing studies that test the reactions of horses in different situations, important information may be available about the horse?s reactivity level. With information from these tests, accidents and dangerous situations may be prevented. When the behaviours from tests are compared with race performance it may be possible to evaluate if some behaviours are more desirable at the race track than others. The aim of this study was to see if behavioural responses correlated with physiological parameters (heart rate, cortisol), the trainer?s opinions and actual race performance.

Android is one of the leading software platforms for the new generation of smartphones. The market for applications is growing rapidly. So to be able to compete with such large competition the applications need a solid and stable development methodology. Therefore have we created an application based on a test-driven development, to investigate if the methodology was applicable on the Android platform. The conclusion is that Android?s suitability for test-driven development is dependent on the application that is being developed and if difficulties concerning the testing framework can be avoided.

The purpose of this thesis work is to create a prototype for an augmented reality application that isaimed to support service technician when performing service and maintenance of machines andengines. The prototype will be used for investigating what technical limitations there is and toestablish basic usability for the user interface. The method that is used is user studies and analysis toevaluate use cases and user stories. An iterative work process is then applied for design and theprototype is continuously user tested.The resulting prototype uses a Samsung Galaxy Tab 2 running on Android operating system. Theframework used for augmented reality is NyARToolkit which handles marker recognition andconnections to Android.

Randomness is a complex area of computer science, where only pseudo random numbers are possible to generate algorithmically.This report presents established algorithms for random number generation by conducting a basic study of relevant literature, while testing distribution and speed of the algorithms contained within the C++11 Random library. The results are compared to the algorithm XORShift and a modified version of it. The study shows that the modified algorithm passes all tests in Small Crush, andthat the run time is shorter than for those in the Random library. The conclusion is that it is possible to, with simple means, modify an algorithm to outperform the algorithms of the C++11 Random library..

  SAMMANFATTNINGLackage fran en komponent i form av vatska eller gas ar ett ofta underskattat problem som kan geupphov till samre produktkvalitet, energiforluster och i slutandan ge ekonomiska konsekvenser omlackaget blir for stort. Det finns dessutom en miljo- och halsorisk om en produkt eller komponentlacker ut storre mangder kemikalier eller metaller. Kan lackaget minskas finns med andra ord storavinster att hamta.Nolek AB bygger instrument for att hitta lackage, lacksokning, och mata lackage, tatkontroll.Foretaget arrangerar utbildningar for sina kunder men har tidigare inte haft nagot uppdateratmaterial for detta andamal. Syftet med examensarbetet ar att producera delar till ett nyttutbildningspaket inom tatkontroll, lacksokning och provtryckning samt att undersoka teorier forskrivande av pedagogiska texter. Arbetets resultat utgors av ett kurskompendium samt enPowerPoint-presentation kopplad till kompendiet.

The thesis is an examination of the methods that are appropriate and long-term choice to obtain clamping force and secure screw joints in production. The employer, Scania CV AB, transmission manufactures axle gears to all trucks produced in Södertälje. One of the most common assembly elements is screw joints, where the clamping force is essential to achieve a secure joint. Current methods to secure the joint is due much of the friction effect and is an indirect method to measure the clamping force. The clampforce accuracy becomes more widely with torque angle control.

The purpose of this study is to achieve an understanding of how a CE- marking process is conducted and to identify the relevant factors that must be considered in such a process. We have conducted our study at Lo?vhults Svets & Smide AB (Lo?vhults) in Skruv, Sma?land Sweden, which are manufacturing brackets for small covering constructions.To understand how a CE-marking process is conducted several documents and provisions have been reviewed to achieve a basic understanding and insight of the subject. It thus led to that guideline ETAG 015 were studied and the factors to be considered in the CE-marking of brackets were identified. Together with Jan-A?ke Johansson at Lo?vhults we agreed on four different brackets to investigate for a potential CE-marking.

E-commerce is a conception who many are taking about nowadays. E-commerce is associate with computer based business and it?s a new way to do business on. Users and system connect up to each other for effective mediate and transfer information. Within e-commerce there?s a lot of ways to do business on and it can for example be between a business and a another business (B2B) or between business and consumer (B2C).In this degree report have I reached if small business will invest on e-commerce and if they will, how.

The report aims to describe the austenitic stainless steel Sanicro 25 from a thermomechanical point of view. The thermal and mechanical properties of the material make it suitable for use in coal ? and thermal power plants. By the use of Sanicro 25 it would be possible to bring the efficiency of these plants up while bringing the carbon emissions down.A material model is created from material testing and validated through simulation in the finite element software Abaqus. The model that has been derived describes the material behavior during loading and stress relaxation for the first cycle in a thermomechanical fatigue test well.