Sök:

Sökresultat:

104 Uppsatser om Trimming mill - Sida 5 av 7

De som aldrig återvände : Hur Kroppa landskommun drabbades av spanska sjukan

Wermland was affected by the Spanish flu like the Swedish national average, about a half percentage of Wermlands population would lose their lives to the flu during the autumn 1918. The flu has for many fallen into oblivion. This oblivion is so wide spread that it´s possible to talk about a "collective forgetfulness". The society have selected to remember 1918 for "when the guns went quiet on the western front" and not for the millions who died from the treacherous Spanish flu. The world had already suffered enough from the four years of war that had been fought, thus the victims of the flu would be honored but would soon fade in to oblivion.  When you investigate deeper you get the picture that the national average don´t do Wermland and its cities or rural areas any justice when a large variations seems to occur within regional areas.

Vederlagsgrundande mätning med skördare

This study was performed in collaboration with Moelven Skog AB, Örebro district. The purpose of the study was to review existing literature in order to describe the current status of harvester based measurement technology as the way to provide information for calculating payment to the forest owners. In addition to this, a short survey was conducted to find out how a switch to harvester based measurement would affect the administrative workload on timber purchasers working for the district. The literature study shows that the harvester measurement technology is ready to use if it is combined with well-established routines for control of the harvesters, methods for automatic quality indexing of the timber and ways of creating pricelists specially adapted for harvester measurement. Pricing each stem seems to be the most promising method. Stem pricing has several benefits.

Samband mellan hög incidens ämnesomsättningssjukdomar och klövhälsa hos svenska mjölkkobesättningar :

Metabolic diseases in dairy cows are considered to increase the risk for claw lesions, most of all laminitis, sole haemorrhages and sole ulcers, but also to increase the risk for environmental claw lesions. The aim of this study was to compare claw health in 27 Swedish dairy farms, 18 with high incidence of metabolic diseases and 9 with low incidence. Data on claw health status was retrieved from recordings at routine claw trimmings and analysed on herd level regarding the prevalence of: any lesion, interdigital dermatitis, heel-horn erosion, sole haemorrhages, sole ulcer, lameness, abnormal claw shape, and other diseases (abscess in the white line, limb disorders, double sole, laminitic groove, white line disease, interdigital phlegmon, interdigital hyperplasia, toe abscess and verucose dermatitis). Mean prevalence of any lesion for herds with low incidence of metabolic diseases was 48 % and in herds with high incidence 41 %, and there was no statistical difference between the two groups. Mean prevalence for interdigital dermatitis was 2,0 % and 6.4 % in the low and high incidence groups, respectively (p.

Oj ska du behålla det?   : En kvalitativ studie om Tonårsmammor i ett Brukssamhälle

Enligt statistik föreligger det en högre frekvens av tonårsfödslar i detta specifika brukssamhälle i jämförelse med en närliggande mellanstorstad.  Det existerar ofta en speciell bruksanda i brukssamhällen där arbete många gånger föredras framför utbildning. Uppmuntrar denna mentalitet till att skaffa barn i ung ålder och vilken betydelse och påverkan har mödrarnas ålder vid barnafödande? Skapar tonårsmammorna sin identitet genom att reproducera mödrarnas livsstil? För att ta reda på detta har fem tonårsmammor blivit intervjuade och fått lämna sin livsberättelse. Intervjufrågorna var uppdelade i tematisk ordning för att få en följsam berättelse. En professionell person som är anställd i en stödgrupp på orten har blivit intervjuad för att få en nyanserad bild av tonårsmammornas situation.

Några vanliga ogräs : en litteraturstudie av arternas biologi samt förebyggande och direkta kontrollåtgärder

The Swedish Board of Agriculture initiated this undergraduate thesis. There is a database on their homepage that includes chemical treatments for different weed species. There is also space for preventive and mechanical control methods. This is an undergraduate thesis that reviews these control methods for the most important weeds in Sweden. The species reviewed are: Creeping perennials: Common Couch Elytrigia repens (L.) Desv. ex Nevski Creeping Thistle Cirsium arvense (L.) Scop. Perennial Sow-thistle Sonchus arvensis L. Field Horsetail Equisetum arvense L. Colt's-foot Tussilago farfara L. Stationary perennials: Dock Rumex L. Mugwort Artemisia vulgaris L. Dandelion Taraxacum F.

Flerskiktat papper : en sammanställning av historia, teknik och forskningsresultat

Until the beginning of the 1900:th century the paper making process was handicraft. The paper machines that have been developed since then are as impressing in size as fascinating when it comes to the technique. The process has always been improved to give a better paper for lower costs, with as short manufacture time as possible. Stratified forming has been a reality since 1830. From the beginning it was applied to board and paperboard.

Analys och organisering av ö-drift för en samförbränningsstation vid Åmotsfors bruk

Åmotfors Bruk AB (ÅBAB) has today an inefficient production of steam for the manufacturing of paper. Unpredictable energy prices and modernisation of the current equipment has been the underlying factors to invest in a thermal power plant, mainly driven by garbage. This facility will not only use the steam for paper production, it will also generate electricity through a steam turbine. Today, when a fault on the supplying line occurs which leads to disconnection of the external grid, all the support of electricity to Åmotfors Bruk (ÅB) will disappear. This will lead to major interruptions in the paper production, which will cause severe economical losses.

Induktiv provning av ferritiskt rostfritt stå

The report examines the factors which may be a contributing cause to the problems that are present when ferritic stainless steel are eddy current tested in a warm condition. The work is carried out at Fagersta Stainless AB in Fagersta which manufactures stainless steel wire. In the rolling mill there is an eddy current equipment for detection of surface defects on the wire. The ferritic stainless steels cause a noise when testing and this noise complicates the detection of defects.Because of this, a study was made of how the noise related to factors such as steel grade, temperature, size and velocity. By observing the signal and with the possibilities to change the equipment settings the capability to let a signal filter reduce the noise level were evaluated.

Ökat flöde genom timmersorteringen vid Ala sågverk

Ala sawmill in Ljusne, Hälsingland, has increased its flow through the sawing plant during the last couple of years. The problem now is the sorting plant, as this part of the mill is now slower than the rest. A close analysis of the sorting plant was therefore necessary to be able to increase the flow through. The aim of the project was to find solutions that can lessen downtime and increase flow. The goal was to increase the flow from 650 to 925 logs through the sorting plant per hour.

En ödmjukt auktoritär rådgivning : Ethos och etik hos föräldrarådgivaren Petra Krantz Lindgren

Wermland was affected by the Spanish flu like the Swedish national average, about a half percentage of Wermlands population would lose their lives to the flu during the autumn 1918. The flu has for many fallen into oblivion. This oblivion is so wide spread that it´s possible to talk about a "collective forgetfulness". The society have selected to remember 1918 for "when the guns went quiet on the western front" and not for the millions who died from the treacherous Spanish flu. The world had already suffered enough from the four years of war that had been fought, thus the victims of the flu would be honored but would soon fade in to oblivion.  When you investigate deeper you get the picture that the national average don´t do Wermland and its cities or rural areas any justice when a large variations seems to occur within regional areas.

Klövform och klövsjukdomar hos intensivt uppfödda köttrastjurar :

The top selection of Swedish beef bulls are evaluated yearly by Svensk Köttrasprövning AB at Gismestad. The bulls are selected from six different breeds; Angus, Blonde d´Aquitaine, Charolais, Hereford, Limousin and Simmental, and are kept on straw bedding apart from a concrete alley in front of the feeding area during the six months of evaluation period. The bulls are evaluated according to their fertility scores, growth, exterior and temperament and the exterior, body posture and claw conformation reflect important qualities for their longevity. In spite of good values for fertility, it has been noticed in the last years that the fertility results and longevity have been unsatisfactory and claw and/or bone disorders have been suspected as a contributory cause. Persson et al. (2007) studied breeding bulls from Gismestad and other places, which had been slaughtered due to poor fertility (no pregnancies in the herd during their last year in service).

Internkommunikation på Gruvön : Modern kommunikation inom industrin

The bulk of the research within the field of media and communication is concentrated at theforefront of development, studies focus on modern companies and modern communication.However, many people work in the industry, where the conditions for communication are partly different. The aim of this study is to explore the possibilities for internal communication that the employees have at the base industrial company of Billerud Gruvön, Sweden. How important do they feel that communication is? Can the internal communication within Gruvön be described as modern, where dialogue between the staff is possible, or as orders from the top down to the bottom of the hierarchal structure?These are our research questions:Which channels are used for communication within Gruvön, and how are they used?How important do the employees deem the internal communication to be?Can the communication within a hierarchal industrial company such as Gruvön be described as modern, where dialogue is at the center, or does the communication consist basically on orders from the top down to the bottom of the chain?Our research is based on the following theories: Communication, Organizational communication, Internal communication and Organizational culture. We have looked to earlier research such as the doctorates of Simonsson (2002) and Johansson (2003) to further our understanding.The methods used are interviews with operators, middle management and the informationofficer at Gruvön.

Energikartläggning av integrerat massa- och pappersbruk

Målet med detta examensarbete har varit att utföra en energikartläggning på Nymölla Bruk med utgångspunkt i företagets be?ntliga energiaspektregister. Syftet har varit att tydliggöra hur energianvändningen på Nymölla Bruk ser ut. Bakgrunden till detta arbete är företagets deltagande i programmet för energieffektivisering i energiintensiv industri (PFE).I examensarbetet har en energikartläggning på Nymölla Bruk för år 2010 utförts. Fallstudien delades in i två steg där första steget i studien var att kartlägga energi?ödena in och ut från bruket.Andra delen av studien innefattade att kartlägga de interna processerna och deras energi?öden.

Avsättningar i pappersmaskiner : Utbildning och förslag till processförbättringar

Deposits can be formed in the paper machine due to sticky materials from wood and recycled paper. These deposits get stuck on process equipment and cause the product quality to deteriorate and the efficiency of the paper machine is reduced. The purpose of this thesis is to increase the understanding about deposits among machine operators, and to suggest methods that can be used to reduce the amount of deposits formed in Bravikens paper machines.To fulfill the purpose of the thesis a pre-study, a literature review and interviews with machine operators and production staff, were carried out. These methods led to the planning and creation of an education about deposits for machine operators.The education about deposits for machine operators consisted of an interactive lecture to introduce the subject of deposits and a subsequent discussion. This approach was chosen to give the machine operators the opportunity to discuss their work situation on the paper machines related to their new knowledge about deposits.

Analysis of eucalyptus plantations on the Iberian Peninsula

This thesis analyses the prerequisites, profitability and competitiveness of eucalyptus plantation on the Iberian Peninsula and in Brazil. The thesis has a macro perspective and analyses a typical hectare of eucalyptus in each studied region. A survey methodology was used as a strategy to cover a broad perspective using expert respondents. The regions studied on the Iberian Peninsula were the ones found suitable for eucalyptus plantations from an economic point of view. The studied regions were Huelva in the South West of Spain, Galicia in the North West of Spain and Portugal.

<- Föregående sida 5 Nästa sida ->