Sök:

Sökresultat:

104 Uppsatser om Trimming mill - Sida 4 av 7

Kvarnkretssimulering för test av styrsystem

This thesis has been carried out in autumn 2009 at Uppsala University for Boliden Mineral AB. Physical modelling has been used to model a comminution circuit. The model has then been linked to a PLC.When a concentrator is about to become operational Boliden Mineral AB have been looking for a way to test the PLC. The purpose of this report has therefore been to develop models for the subprocess in a concentrator and link these models to the PLC. The subprocess was a comminution circuit in Aitik36.

Optimering av blekeriet i CTMP-linjen vid Rottneros Bruk

At Rottneros pulp mill mechanical pulp is bleached with hydrogen peroxide. The changes of bleaching chemicals that are used for different grades are taken from bleaching tables; however these tables are old and need to be updated. The purpose of this thesis was to be the basis of new documentation.In this thesis three pulps where studied with the aim to find the optimal bleaching chemical changes (total NaOH/VP-quote) for each pulp. The pulps were taken from the filter before the bleaching tower and the pulps were bleached in the lab. The most important pulp property in this study was the brightness and how that was influenced by the chemical dosages.

Föroreningar orsakade av stenar inblandade i barrmassaved

Holmen Skog AB is an important supplier of conifer pulpwood to the Iggesund Paperboard mill. After logging and transport to the landing by a forwarder, the wood is loaded on trucks for further transport, often by using separate loaders. During this handling process considerable amounts of stone material is sometimes mixed into the pulpwood and this causes problems for the industry. The aim of this study is to identify which part of the chain from forest to pulpmill, that contributes the most to this contamination. Sizes and total volumes of the contaminating stones were also investigated.

Energieffektivisering på Skutskärs Bruk : Varvtalsstyrning till utvalda pumpenheter på Blekeri 4

In modern society in terms of economics and environmental impact, it is important to ensure that a company is as energy efficient as possible to reduce the amount of energy used. About 10 TWh of electricity used annually to pump drives in Swedish industry. Therefore, pumping system has great potential for energy savings.The objective of this report was to determine how much energy and money that can be saved with the insertion of variable speed drive to six pumps on Bleach plant 4 in Skutskär Mill. The work was performed with electrical measurements during one week, analysis of pump curves and the compilation of production data over a year.The results show that four of these six pumps were profitable and yielded an annual saving of 1172 MWh of electricity and 560 000 SEK. With an economic lifetime of 10 years and a discount rate of 6.8% the final result for the entire life-cycle savings became 3 355 000 SEK.

Hållbarhetsidéns resa : En fallstudie om hur hållbarhetsidén översätts inom ett pappersbruk

This study focuses on how the idea of sustainability is dealt with by companies, how the idea changes when moving through a company structure and how the different individuals interpret the idea. To date, many different studies have been written on the subject of sustainability, but few share the perspective addressed in this particular study. This case study was formed at a paper mill in the central part of Sweden. Semi-structured interviews with employees working on different hierarchical levels, within the same company, were chosen in order to get an insight into how the idea of sustainability is implemented throughout an entire company. The interviews have been transcribed to help identify contrasting patterns.This study has shown that the idea of sustainability, and its context within society, differs from how the idea is perceived in the organization.

Modersmålsundervisningens låga deltagande : En undersökning om varför elever med behörighet inte deltar i modersmålsundervisning

The fundamental freedoms and human rights is something the countries, and its citizens, of theEuropean Union more or less take for granted. However, in recent years these rights have become atopic of discussion in the way that a debate about the Islamic headscarves has developed. Thisdebate has resulted in that a number of countries, including France, have taken legislative measuresto ban clothing that fully covers ones face. Out of these bans a discussion has arisen concerning thefundamental freedoms and human rights. These burqa bans, as it is labeled in the pubic debate, havebeen accused to wrongfully limit the individuals freedoms and human rights.This study therefore has the aim to analyze these burqa bans in relation to the European Union,United Nations and the Council of Europe?s general declarations concerning the fundamentalfreedoms and basic human rights.The main result of this study shows that these bans in fact is not a proportionally restrict in thefundamental freedoms and human rights.

Burkaförbud : Rättfärdigad restriktion eller brott mot de grundläggande friheterna och mänskliga rättigheterna?

The fundamental freedoms and human rights is something the countries, and its citizens, of theEuropean Union more or less take for granted. However, in recent years these rights have become atopic of discussion in the way that a debate about the Islamic headscarves has developed. Thisdebate has resulted in that a number of countries, including France, have taken legislative measuresto ban clothing that fully covers ones face. Out of these bans a discussion has arisen concerning thefundamental freedoms and human rights. These burqa bans, as it is labeled in the pubic debate, havebeen accused to wrongfully limit the individuals freedoms and human rights.This study therefore has the aim to analyze these burqa bans in relation to the European Union,United Nations and the Council of Europe?s general declarations concerning the fundamentalfreedoms and basic human rights.The main result of this study shows that these bans in fact is not a proportionally restrict in thefundamental freedoms and human rights.

Genotype by environment interactions of claw health in Swedish dairy cattle in tie stalls and loose-housing

Claw diseases are common diseases in modern dairy production. They are painful for the cow and costly for the producer. Differences in the prevalence of claw disease depending on housing system have previously been observed. This raises the question if there are genotype by environment (GxE) interactions for claw diseases in different housing systems. To investigate this claw trimming records for Swedish Red dairy cattle (SR) and Swedish Holstein cows (SH) were retrieved from the Swedish Dairy Association.

Kartläggning och analysering av initieringsprocessen : En fallstudie utförd hos Teknikgruppen för RV2012 på Sandvik AB

This thesis has been carried out to the Technology Group at industrial plant Tube Mill2012, which belongs to the Sandvik AB. Technology Group is a unit that takes care ofall requirements and suggestions regarding investigations, test runs and designmodifications. The main objective is to identify and analyze the existing initializationprocess to see where improvement opportunities exist and to come up withsuggestions for improvement, supported by previous research and literature. Anextensive literature search and case study has been conducted to provide a solidfoundation to refer to during the work. Completing the interviews and the workshopgave a clear picture of their unstructured work and approach, how the lowrequirements on the received orders caused problems for the group as well as thelack of a standardized resource allocation method provides major delay factors.Solution proposal then became a very easy process model in five steps with all theinformation gathered in one place.

Optimering av indunstningsprocess

The wastewater treatment plant at GE Healthcare's facility in Uppsala deployed a three step vacuum evaporator in 2007. The purpose of this was to pre-treat wastewater containing amines. The purpose of this thesis was to optimize thisprocess by reducing the amount of concentrate without releasing more nitrogen tothe environment and to examine if density could be used as a measurement of whenthe process should be ended.To create a foundation for optimization six test cycles were conducted with samples taken from all three steps. Both concentrate and condensate were tested as well as the incoming solution. Furthermore, the thesis has been expanded with a benchmarking part examining two different evaporators.

Blod, svett, tårar? och Word of Mouth? ? Att arbeta aktivt med Word of Mouth

Det blir allt svårare för företag att särskilja sig på marknaden. Traditionell marknadsföring är inte längre lika effektiv som förr, och idag finns flera olika strategier för att sticka ut i bruset. Kring varumärken och produkter skapas ofta ett rykte, som ibland antingen kan vara positivt eller negativt. Ibland har detta rykte uppkommit utan påverkan ifrån företaget, men det finns även strategier för att skapa och påverka sitt eget rykte. Ett positivt rykte kan leda till ökad försäljning och vinst.

Återvinning av dryckeskartonger : En studie som syftar till att öka återvinningsgraden av Tetra Paks förpackningar i Indonesien

People of the modern world consume more than they ever used to do. Because of the close correlation between consumption and the amount of waste, the waste volume is also expected to increase. The purpose of this study is to examine if some measures in the recycling process from Sweden could be implemented in Indonesia. In fact, Indonesia is one of the countries in which the waste management system is struggling. Tetra Pak, one of the world leading producer of food packaging, is studied in this report.

Taktikdriven teknologiutveckling

De empiriska beskrivningarna av förhållandet mellan taktik och teknologi är svagt problematiserad. Krigsvetenskaplig litteratur indikerar att taktiken har ett inflytande på teknologiutvecklingen ibland och ibland inte. Varför påverkar taktiken ibland teknologiutvecklingen medan den vid andra tillfällen inte påverkar?Syftet med den här uppsatsen är att bidra till teoribildningen för taktikens påverkan på teknologiutvecklingen genom att undersöka under vilka förutsättningar taktik påverkar teknologin. Undersökningen ska ge förslag på orsaker till att taktiken påverkar teknologiutvecklingen samt det kausala förhållandet däremellan utifrån de utvalda typfallen.  Därigenom bidrar undersökningen till teoribildningen och vidare vetenskaplig prövning inom det bristfälligt utforskade området.

Effekter av Aggression Replacement Training Program inom Kriminalvården

Huvudsyftet med denna uppsats är att undersöka effekterna av aggressionsersättningsträning (ART) program på tre kriminalvårdsanstalter och två frivårdskontor. Huvudfrågeställningen som belyses i studien är: förändras deltagarna i ART-program med avseende på empati och attityder till kriminalitet? För att besvara dessa frågor har vi utfört för- och eftertester på tre kriminalvårdsanstalter och två frivårdskontor. Instrumenten som användes i testerna är Davis Interpersonal Reactivity Index (IRI) och Mill's Measures of Criminal Attitudes and Associates (MCAA).Slutsatserna som kan dras utifrån denna studie är att den emotionella empati-komponenten "personal distress" visar en minskning som kan förklaras av interaktionen med ART.The aim of this study is to investigate the effects of Aggression Replacement Training (ART) program in some of the prisons and probation authorities of the Swedish correctional system. The specific questions we are trying to answer are: (1) does ART-program change the clients' empathic concern and (2) does ART-program help in changing participants' attitudes towards criminality? This investigation is based on a quantitative inquiry consisting of Interpersonal Reactivity Index (IRI) and Measures of Criminal Attitudes and Associates (MCAA) tests.The overall results of this study indicate that the emotional empathy-component "personal distress" shows a statistically significant reduction, which can be explained by the interaction with ART..

Utvärdering av mjukvara inom processindustrin

This study is an evaluation of the runtime watch function in a OEE software, knownas ProTAK. OEE stands for Overall Equipment Effectiveness, it?s a way to measurethe factories process efficiency. The runtimewatch function allows the user to setup and monitor certain critical objects that are of importance for the pulp and paper process at the mill. The data from the runtimewatch can be correlated towards the suppliers specification for the components.

<- Föregående sida 4 Nästa sida ->