Abstract The accident in 1986 at the nuclear power station in Chernobyl, Ukraine, dispersed radioactive cesium over large areas of Europe. The half life of 137Cs is 30 years and this radionuclide also behaves like potassium, which means that it can easily be taken up by the vegetation or be adsorbed in to the structure of clays, principally illitic clays. When radiocesium decays ionizing radiation is emitted, which is harmful to humans that are exposed, either directly or indirectly through food intake. It is there-fore important to know what happens to the cesium that is dispersed into the environ-ment. In this project a simulation model was constructed to simulate the adsorption and transport of radiocesium in the soil and plant uptake.

The aim with this report was to exam and surveys the internal logistics of Proton Finishing?s production. The basic data should give the company suggestions of more efficient and improved internal logistics. We will also give from our perspective suggestions of improvement, which the company will be able to evaluate.To evaluate these problems we used different kinds of methods. A frequency study was made on the internal forklift.

Generellt gäller att den undersökta branschen har blivit ganska så hårt påverkad av finanskrisen och lågkonjunkturen. De flesta åkerier har tvingats säga upp personal och även sänkningar av antal arbetstimmar förekommer. Omplaceringar är inte så vanliga inom populationen och det lutar åt att de mindre åkerier klarat sig lindrigare undan än vad de större har gjort. De åkerier som har varit i branschen en längre tid verkar också vara mindre känsliga för marknadsförändringar. Framtidsbilden ur åkarnas ögon ser mestadels stabil eller positiv ut medan investeringsviljan i branschen har avtagit då majoriteten nu är mer försiktiga än vad de varit tidigare..

Abstract The technology has made it possible for you as a train traveller to be available in other places than stations and on the train. You now have the possibility to communicate by the phone or through the Internet to get information about the train you want to take. Development in mobile technology gives us new possibilities to communication. We want to find out whatever SMS would be a suitable approach to inform passengers about delays. The problem formulation is ?If the technology is available to inform the passengers about delays in an more effective way than today, then why not use it? The ?Kustpilen? that operates in Blekinge and Skåne is the case for our study.

During the past years Building Information Modelling (BIM), which is a digital way to work, has begun to spread amongst the parts of the construction process. At the construction phase the larger companies has started using the new way to work. This expansion has not been developed amongst smaller companies leading to the purpose of this report, to investigate in which ways the smaller companies can implement BIM by changing their way to work. The thesis is delimited to work preperations with the objective to define how the work preperations should be structured to enable the implementation of BIM. To achieve the objective of the report, information about the subject has been collected by interviews and literature studies.

Since the late 50th century, the automobile has been normative in the Swedish society (Lundin 2008). This has led to an urban environment deeply characterized by the motor vehicle and its necessities, while other means of transportation, such as train and bicycle, have been ignored and put aside. However, over the past decades, a new trend has been seen in urban planning as a consequence of the increasing knowledge of the negative qualities caused by the car. As a result, the bicycle is seen as a conceivable transport mode.This thesis examines cycling on four issues:- Why is there a need of more cyclists? - How can the total number of cyclists as well as the number of satisfied cyclists increase? - Which factors affect the choice of transport mode? - Which factors affect the choice of route?The first two questions are discussed from a literature study that was conducted at the beginning of the thesis.

Within today?s organizations there is continual development work to increase efficiency and the power to compete at the market. Production development with focus on continual improvements constitutes an important part of the daily work within a lot of organizations today.The purpose of this study is to contribute to a part of the development process that Volvo Penta factory in Vara has in mind. A description of the current situation was compiled by mapping the internal runnings and material flow throughout the factory. A new suggestion for a layout and a comparison with the current situation will assist with creating a factual basis for the development of a new goods reception.A study was made where the volumes and the quantity of the daily arrival goods were settled.

Syftet med denna uppsats är att beskriva hur företag i logistikkedjan, rederi ? hamn ? åkeri, förberett sig inför de nya länderna, Lettland, Litauen och Polens inträde i den Europeiska Unionen den 1 maj 2004. Vi har även valt att undersöka vilka omvärldsanalysmetoder företagen använder sig utav, hur de i så fall tillämpar dessa och ge eventuella förslag på omvärldsanalysmetoder..

This thesis aimed to study the interaction between an educational technology system and its users and give suggestions for design improvements. The technology system is called EDIT (Educational Development through Information Technology) and has been developed and applied at Linköping University?s Faculty of Health Science. EDIT supports Problem Based Learning and enables scenarios to be presented through the World Wide Web. The study was divided into two parts.

The purpose of the rebuild of Notnäs AB timber sorting line is to renew the existing drive and turning ends of the transport chain, which has become old. This means that Notnäs AB have problems to get new parts if the gearbox and chain are worn out. They also require that the rebuild should have a maintenance schedule for the new spare parts that will be used in the rebuild. Maintenance workers placed great emphasis on that in a rebuild it shall be a service-friendly design. The maintenance schedule used in Notnäs AB in the current situation is from Statoil and the report uses SKF formulas and recommendations in order to obtain a lubricating schedule.

This examination report is a part of a program for Industrial organisation and Economics with specialization in Logistics and Management at Jönköping University. The report contains an analysis of the internal material handling at Kongsberg Automotive, and also an improvement proposal for a new material handling system.The aim with the report is to find a better material handling system and also make an analyse of the existing system. The goal is to shorten the distance for the operators when they order material, and also to increase the productivity.The investigation methods for the report have for the most part consisted of observations and interviews of key-persons who daily work in the production. During some time the actual material handling-system has been observed and some shortcomings have been discovered, and these are also discussed in the report.The shortcomings that have been discovered are for once the indistinct signal that should signal need of material in the production. Some other activities have also been discovered that does not bring any value into the final products.

Bakgrund: Flygtransportbranschen är hårt konkurrensutsatt genom stark etablering av lågprisbolag. Därtill har händelser såsom terrordådet i New York och SARS påverkat marknaden negativt; branschen har dessutom drabbats av förändrat kundbeteende, bland annat hos privatkunder, och flygbolagen finner det allt svårare att förutse kundernas köp. En medvetenhet om att resenärerna ser priset som en primär faktor vid val av flygbolag finns, men det har visat sig svårt att identifiera andra faktorer.Syfte: Syftet med denna uppsats är att öka förståelsen för privatresenärers köpbeteende vid val av flygbolag. Vidare skall vi genom detta dra slutsatser om faktorer som påverkar kundtroheten inom flygtransportbranschen.Genomförande: Uppsatsen bygger på kvalitativ metod, där empirisk rådata har insamlats genom 48 intervjuer med privatresenärer, fyra intervjuer med anställda på marknadsavdelningen på Scandinavian Airlines Sverige AB och en oberoende intervju med en professor vid Handelshögskolan i Stockholm.Resultat: Våra resultat bekräftar prisets betydelse vid val av flygbolag, men utöver detta har vi kunnat se ett antal för privatresenären värdeskapande faktorer, bland annat personalens bemötande, som påverkar valet av flygbolag. För att beskriva privatresenärernas köpbeteende har vi utvecklat en anpassad behovshierarki för flygtransportbranschen baserat på Maslow, där olika värdeskapande faktorer beskrivs.

When building large buildings, such as compartment buildings, there is a number of deliveries arriving on the construction site daily. In order to receive these deliveries without disturbing the rest of the work going on JM often books a fixed unloading time. When doing that they can be prepared when the delivery arrives. Making sure there is a suitable unloading area, someone to meet the delivery and when needed proper machines, such as a tractor or a crane, to help unload bigger deliveries. The person receiving the delivery is supposed to make an acceptance control where they check the delivered goods making sure nothing has been damaged in transport and that they have received what they were supposed to receive.

Detta examensarbete a?r skrivet inom a?mnet informationsdesign med inriktning mot rumslig gestaltning. A?mnet som studerats a?r orienterbarhet i stationsmiljo?er med syfte att utveckla navigeringsmo?jligheter pa? stationer vid byte mellan olika fa?rdmedel. Da?rfo?r har ett konceptfo?rslag tagits fram som ska underla?tta fo?r resena?rer att hitta sin transport, a?ven i en tidspressad situation.

Sönderdelning och transport av GROT (grenar och toppar) kräver dyra maskinsystem samtidigt som efterfrågan av sortimenteten varierar kraftigt under året. Det är därför svårt att planera flöden av GROT-flis effektivt och samtidigt välja rätt maskinsystem. AB Karl Hedin är en sågverkskoncern lokaliserad i Bergslagen. De äger fyra sågverk varav tre är sverigebaserade. De levererar även GROT-flis till flertalet värmeverk och har ett behov av ett beslutsstöd som underlättar sortimentets flödesplanering och föreslår maskinsystem. Projektets syfte var att skapa ett användarvänligt enperiodsbeslutsstöd med mål att maximera den totala vinsten och genom detta kvantifiera GROT-flisflödets förbättringspotential. Nio månaders historiska flödesdata kartlades och användes som jämförande testperiod. Genom en fallstudie bestående av två scenarier analyserades optimeringar med månadsvisa, kvartalsvisa och säsongsvisa (9 mån) optimeringshorisonter: 1.