Climate change is the modern society?s common issue. The developed countries areconsuming more than what is sustainable, and the climate change due to the use offossil fuels can be seen clearly. EU has specified goals, in order to stop furtherdamage, which demand that every member state have to reduce its energyconsumption by 20 % before 2020 and 50 % before 2050, relative to 1995.The Swedish government uses a number of instruments to encourage reduction in theusage of energy, but every individual has to contribute to reach the goals.With increasing energy price the cost of living is going up. A lot of people are lookingfor ways to save energy and not be affected as much by the increasing price.Investments for insulation, replacement of windows and replacing old heating systemfor a new efficient heat pump is getting more and more common.This thesis is about investigating the possibilities in becoming independent from buyingenergy for households.

Abstract Today it is very common that some person register a domain name that is identical or confusingly similar to a hallmark that is someone?s protected property. From the owners opinion this can result in a lost of company?s goodwill and there is risk that hallmark becomes powerless.Every physical and legal person can register someone?s protected hallmark as a domain name under top ? level domain .se because owner has no possibilities to stop the registration in advance. The owner of hallmark can only open a dispute trough ATF and try to win and attain a transfer of that registered domain name to itself.

Small and Medium sized Enterprises (SMEs) within the European Union are currently facing many challenges one being access to financing due to high risk and probability of default, another being cross-border taxation issues with double taxation and information asymmetry. Since the aim within the EU is to be the most competitive and dynamic knowledge-based economy in the world with sustainable economic growth and social cohesion it is essential that the EU operates as a single market. Despite this need, harmonization continues to be far from achieved in the area of direct taxation which also affects the integration and growth opportunities for SMEs. In the Agenda for Entrepreneurship, the Home State Taxation regime, which is based on formula apportionment, has been proposed by the Commission as one option in order to mutually recognize the different Member States? taxation systems to facilitate cross-border activities and reduce ?red-tape?.

Denna undersökning behandlar spel i kontext till lärande och matematik. Genom att gestalta ett spel undersökte vi, författare hur olika designval kunde påverka lärande. Målet var att spelare skulle lära sig genom situationsbaserat lärande och där genom få möjlighet att överföra sin kunskap till sitt vardagsliv. Undersökningen hade sin utgångspunkt i ANT (actor-network theory) som användes som metodologi för att analysera och reflektera över de val som gjordes. MDA (Mechanics Dynamics Aesthetics) användes som ett ramverk för att utveckla själva gestaltningen.

Shell companies are characterized by containing liquid assets such as cash, securities or other similar assets. Transactions of shell companies constitutes a severe problem since the purchaser often has the aim of obtaining undue tax advantages by not paying the tax debt of the company.Historically it has been complicated for the legislator to stop the set-up in an efficient way since the transactions as such are not illegal, instead rather commonly used for example to restructure companies or for the transfer of companies to the younger generation. The purpose of the current legislation is to prevent individuals and corporations to involve in shell company trade. Aiming for an efficient legislation, the tax rate is at a very high level.The issue with the rules is that also honest buyers are at risk of being covered. This calls for high demands in complying with the principle of legal certainty and the possibility to forecast the tax consequences.The purpose of the thesis is to identify and analyze eventual problems when applying the legislation.

This thesis has been carried out within the bachelor program for mechanical engineering at Karlstad University in collaboration with BAE Systems in Karlskoga. The purpose with this work was to design a mechanism and associated parts for loading and unloading of shots between primary and secondary magazine in BAE's new 40mm's ship gun.Parts designed or redesigned among other things a transfer mechanism for shot at loading and unloading, well as a hatch mechanism which makes the shots do not fall out of the primary magazine when making separate use. Various important details have been designed to maintain a good functionality of the mechanism.The construction work has mainly been carried out in the CAD software Solid Edge and its associated FEM module. The construction work has also been carried out on rough calculations for constructed details in order to ensure that they meet the stringent requirements of military use in tough marine environment. Two of the most critical parts of the structure where analyzed with the FEM module for estimating the stresses in the material at the applied load.The final design, which is a result of the thesis, meets the requirement specification and the set targets.

The aim of this master thesis is to study how the development of a public library by means of ideas and methods from the private sector can be related to traditional core values. We base our study on institutional theory, which focuses on norms and values in an organisation, and new institutional theory, which focuses on how organisations are influenced by changes in the environment. We also use New Public Management with a market focus to analyze the implications of a development towards a more market oriented view.The method used is that of a case study of a new library concept, Idea Stores in London. Idea Stores are a number of new public libraries in Tower Hamlets developed from the results of a major opinion survey about libraries. The Idea Stores combine traditional library services with elements of adult education and lifelong learning in a partnership with local learning centres.

In this Bachelor thesis I explore sound and room as elements in design of user interfaces, both theoretical and practical in a specific application domain, to identify some of the advantages and disadvantage associated with these elements. As application domain I studied email clients and their usage at home amongst students at Blekinge Institute of Technology. In the study I found an activity, which seems to be highly distributed in the physical room where the user is located. The activity was notification of email and could take place in an arbitrary location of the home. I then augmented this activity with ideas from my theoretical assumption about room and sound.

Detta examensarbete är en studie av huruvida en grundläggande laborativ fysikkurs för gymnasieelever kan vara en bra idé för att göra matematiken mindre abstrakt och mer intressant. Metoden för datainsamling baserades på kvalitativa intervjuer, litteraturstudier samt en observation av ett laborativt moment. De som intervjuades var gymnasieelever, elever från vuxenutbildningen, aktiva pedagoger och en gymnasierektor. Litteraturstudien behandlade tidigare och pågående forskning och de aktuella styrdokumenten. Resultaten från intervjuerna, observationen och litteraturstudierna sammanställdes och de visade på att praktiska moment kan stärka viljan att lära och förståelsen för teorin bakom.

This thesis has been carried out within the bachelor program for mechanical engineering at Karlstad University in collaboration with BAE Systems in Karlskoga. The purpose with this work was to design a mechanism and associated parts for loading and unloading of shots between primary and secondary magazine in BAE's new 40mm's ship gun.Parts designed or redesigned among other things a transfer mechanism for shot at loading and unloading, well as a hatch mechanism which makes the shots do not fall out of the primary magazine when making separate use. Various important details have been designed to maintain a good functionality of the mechanism.The construction work has mainly been carried out in the CAD software Solid Edge and its associated FEM module. The construction work has also been carried out on rough calculations for constructed details in order to ensure that they meet the stringent requirements of military use in tough marine environment. Two of the most critical parts of the structure where analyzed with the FEM module for estimating the stresses in the material at the applied load.The final design, which is a result of the thesis, meets the requirement specification and the set targets.

Syfte: Studien syftar till att undersöka internationaliseringsprocessen hos svenska sjukvårds-och omsorgsföretag som tillhandahåller sjukvårdstjänster. Dessutom kommer studien att undersöka svårigheter, möjligheter och framtidsutsikter i samband med sjukvårds-och omsorgsföretagens internationalisering.Metod: Denna studie har genomförts genom tillämpningen av en kvalitativ metod och en deduktiv ansats. Informationen hämtad från studiens primärdata och sekundärdata har varit grunden för undersökningens analys och slutsats.Slutsats: Företagens internationaliseringsprocess har sett olika ut beroende på företagens struktur och hur de arbetar med sjukvård och omsorg vilket lett till olika val av strategi. Svårigheterna har varit i form av skillnader i lagar, regler, kultur och olika sjukvårdssystem som finns i olika länder. Den största möjligheten från en internationalisering har varit förvärv av ny kunskap och kunskapsutbytet mellan länder.

The task given to us was to develop an industrial wheel with new thinking in terms of fresh design and construction, with the ability to brake. While the produced wheels of today only own the property of total braking, a wish was made to integrate the ability of directional locking.The time spent working with the project has been filled with multiple sketches of ideas and function analysis.Choices of material and ways of construction have been verified by calculations, tests and prototype building. The goal of this thesis has been to develop a unique caster with well thought-out design that would be adaptable to different areas of applications.The result was a hubless wheel with the ability of directional locking before total braking.A prototype of the wheel has been made to show the design and functions..

This work deals with the introductory course for immigrants (Introduktionskurs för invandrare ? IVIK) in the Swedish municipalities. I have studied how the participants in this education are brought into a Swedish understanding of religion, both in the formal SO (social studies) and when it comes to informal transferring of values.I have interviewed teachers and school leaders, interviews which I have then analysed.To understand the educational environment, I have used Antonio Gramsci´s theory of hegemony, as I perceive it, as well as Michel Foucault´s ideas of power and knowledge.I have found that fostering into a ?Swedish? view on religion appears in the education, implicitly as well as explicitly, though the informants tend to have an ambivalent opinion as to how this should be carried out, and to which extent..

The purpose of this study was to find out what kind of fiction 120 borrowers at Sundbyberg'stown library borrow and how they obtain information about the existence of the books theywant to borrow.I have carried out an inquiry among those visiting the fiction area of the library and alsointerviewed three librarians. To be able to compare my results with other more extensivesurveys, I have studied some literature about, e.g. reading and library habits. Furthermore, Ihave read articles about fiction at libraries and culture politics. I came to the conclusion thatcrime novels are the most popular kind of fiction whereas science fiction and fantasy fictionare the least popular ones.

The aim with this paper is to study Karl Popper?s view on realism and relativism. Further aim is to see whether those ideas have been consistent over the years. The paper argues that Popper since his first interest in philosophy has taken a realistic and antirelativistic attitude. Only his arguments for this position have been developed to meet his critics.Common sense speaks for realism but can neither be proven nor refuted.