Radio Frequency Identification, RFID, is a convenient way to enable contactless identification which does not require any physical nor optical contact. As with any radio-based communication the signal can be intercepted, thus making the technology vulnerable to several kinds of attacks. Interception of communication is not the only threat. Since RFID tags might contain personal information or information that will grant the owner access to secure areas, skimming and spoofing attacks are also major threats against this technology. In this thesis report,  the perspective of an adversary is portrayed in an RFID-enabled environment by presenting where RFID is used and how it could be abused.

The purpose of this report was to investigate what characterizes a good psychosocialwork environment, and whether it may have impact on a vessel's safe voyage. Thisreport is proposed to increase the understanding of what creates a good psychosocialwork environment and its potential effect on safety at sea. In order to find out thesuccess factors for a good work environment group interviews were conducted in socalledunstructured focus groups. During these conversations, the participants discussedfreely by the question "what is a good psychosocial work environment for you?? Thesuccess factors were thereafter applied on selected accident reports, to investigate theextent to which they were represented and taken into account.The results of the study show three categories of factors: colleagues, communicationand competence, where colleagues are the main contribution to a good psychosocialwork environment.

SammanfattningBakgrund: Dagens stillasittande livsstil med ökat intag av energigivande ämnen resulterar i ett konstant anabolt hormonellt påslag. Detta leder till ökad övervikt och andra välfärdssjukdomar. Det rekommenderas att individer håller sig till en hög måltidsfrekvens med jämna mellanrum under dagen. Detta har börjat ifrågasättas med konkurrerande alternativ som involverar en tidigare samhällslivsstil så långt som 10 000 år sedan, då måltidsfrekvensen inte kunde planeras på samma sätt som idag.Syfte: Syftet är att under sju veckor undersöka effekten av två stycken veckovisa 24-timmars periodiska förbud mot intag av energigivande ämnen, med implementering av fysisk styrketräning och dess effekt på lean body mass (LBM) och fettvikt hos yngre individer.Metod: Två separata 24-timmars perioder av fasta i samband med tre separata styrketräningstillfällen genomfördes per vecka under sju veckor. Kroppsmått gällande kroppsfett i procent, fettvikt i kilogram (kg), kroppsdimensioner i centimeter (cm), LBM och total kroppsvikt i kg togs innan och efter studiens genomförande.

Detta examensarbete är ett projekt som utförts på uppdrag av Sunnex Equipment AB. Syftet var att utveckla nya ledade armsystem till en medicinsk belysning för att ersätta de tre armsystemen som marknadsförs av företaget idag. Det var även önskvärt att projektet resulterar i ett förslag på utformning av ett tillhörande lamphuvud. Fokus har varit design och ergonomi. Arbetet har följt en strukturerad produktutvecklingsprocess som inleddes med informationsinsamling genom användarstudie, intervjuer, konkurrensanalys och litteraturstudier.

This essay consider ritual death during the ironage, and through a presentation of historical and archaeological sources. Considered ritual death I think we should study both historical and archaeological sources, to get a vider view and a new perspective. To make the essay easier to understand I have split up the early and the late Iron Age in the discussion. In order to study the ritual death I have shown archaeological examples like bogsacrifices in the early ironage, and decapitated victims in the Viking society. The victims have been considered as slaves by some archaeologist.

Den här rapporten avhandlar arbetet med att ta fram ett förslag som förlänger Volvos kärnvärden - kvalitet, säkerhet och miljöhänsyn, ut i Utvecklingsverkstaden på Volvo Construction Equipment, Hauler Loader Business Line, i Eskilstuna. Förslaget är utformat som ett koncept, som ska kunna överföras till andra verkstadsmiljöer på Volvo, om så önskas. Idéförslaget har baserats på en studie av den befintliga Utvecklingsversktaden. En modell av verkstaden i skala 1:50 utformades som presentationsmedium.Vid examensarbetets slut har förslaget presenterats och utvärderats av målgruppen. Den primära målgruppen har varit de anställda på avdelningen.Slutsatserna av arbetet är att en informationsbärande interiör kan formges för att representera ett företags kärnvärden och visa på innovation och framtidstänk.

Örebro UniversitetInstitutionen för hälsovetenskap och medicin           Arbetsterapi Arbetes art: Uppsatsarbete omfattande 15 högskolepoäng, inom ämnet arbetsterapi.Svensk Titel: En jämförelse mellan Bobathmetoden och andra interventionsmetoder för behandling av strokepatienterEngelsk titel: A comparison between the Bobath method and other interventions for stroke patientsFörfattare: Maryam Tondkar MogadamHandledare: Marie HolmefurDatum: 2012-05-03 SammanfattningBakgrund: Bobath behandlingsmetod utvecklades i England på 1940-talet för patienter med hjärnskador. I denna behandlingsmetod ska patienter lära sig att kontrollera sina onormala rörelser och muskelspasticitet.Syfte: Syftet med denna studie är att jämföra Bobathmetoden med andra interventionsmetoder för att kunna se vilken behandlingsmetod som har bättre effekt för strokepatienter.Metod: Systematisk litteraturstudie gjordes i databasen AMED, PubMed och Cinahl för att ta fram aktuell forskning inom detta område. Artiklarna som kom fram är kvantitativa och Randomiserade Kontrollerade studier.Resultat: Resultatet av studierna visar att Bobathmetoden har positiv effekt för att klara aktiviteter i dagliga livet. Bobathmetoden visar förbättring från akuta fasen till efter behandling i ADL aktiviteter. Studierna visar att Motor Relearning Programme, Arm Basis training och Balance Performance Monitor träning har bättre effekt än Bobathmetoden i ADL aktiviteter.Arm Basis training, Motor Relearning Programme och Bobathmetoden förbättrade handfunktionen över tiden.

Radio Frequency Identification, RFID, is a convenient way to enable contactless identification which does not require any physical nor optical contact. As with any radio-based communication the signal can be intercepted, thus making the technology vulnerable to several kinds of attacks. Interception of communication is not the only threat. Since RFID tags might contain personal information or information that will grant the owner access to secure areas, skimming and spoofing attacks are also major threats against this technology. In this thesis report,  the perspective of an adversary is portrayed in an RFID-enabled environment by presenting where RFID is used and how it could be abused.

This report is based on a thesis that was carried out during spring 2012. The report covers the development of a preliminary study to Performance Sk8. The purpose of the study is to facilitate and contribute inspiration to Performance Sk8 to run an automation project to bring home their production to Sweden from China. The reason is to gain a greater ability to control quality, produce smaller batches and reduce the cycle time to reduce costs.The goal is that the preliminary study shall meet the requirements and wishes Performance Sk8 and other partners defined. The pre study will contain different cost proposals for the automation of selected process and serve as a basis for procurement of the equipment.The pre study has resulted in some proposed solutions to the various steps required to automate Performance Sk8 ?s production.

Radio Frequency Identification, RFID, is a convenient way to enable contactless identification which does not require any physical nor optical contact. As with any radio-based communication the signal can be intercepted, thus making the technology vulnerable to several kinds of attacks. Interception of communication is not the only threat. Since RFID tags might contain personal information or information that will grant the owner access to secure areas, skimming and spoofing attacks are also major threats against this technology. In this thesis report,  the perspective of an adversary is portrayed in an RFID-enabled environment by presenting where RFID is used and how it could be abused.

In this thesis we propose a conceptual plan for thedevelopment of an Agroforestry Training Centre (ATC)in Musoma, Tanzania. The aim is to make a proposalto support peasant education in agroforestry. How canan ATC in Musoma be developed into a stimulatingand educational park suitable for teaching agroforestrymethods to peasant farmers and other potential users?To answer that a field study was conducted to investigatehow our client Vi Agroforestry Programme (Vi) and thetarget groups of the client can benefit from the site.The thesis begins with a short explanation of thecontext, in which the ATC plays a part followed by amethodology chapter. Next are three chapters presentedwhich introduce the reader to the research conductedbefore starting the proposal, these include: results ofliterature studies, study of precedents, and results of fieldstudy.

This degree project was conducted in collaboration with Gremo AB located in Ätran.The aim of the project was to develop a solution to secure quality and to help assemblingthe locknut holding the vertical hinge on the harvesters and foresters from Gremo.At this time the nut is assembled manually by the aid of an overhead crane. The nut istightened differently from time to time, and there was no specified torque to which it istightened. Another present problem was the locking washer which sometimes getsdamaged during assembly, when this happens the procedure has to be started over fromthe beginning. The current assembly procedure is very time consuming and lengthy forthe employees.Our task was to design a machine that could tighten the nut to a specified torque with amargin of error of ± 3%. The assembly procedure will be held simple and the timerequired at a minimum.The project started by developing several principle solutions, the one solution that bestmatched our specifications were developed to a primary solution.Today we have started manufacturing and assembling our prototype.

There is a settled stereotype for women and men which give them different possibilities in our society. The schools, which are one of the most important sources of knowledge, have a great possibility to influence. This is the reason why we are interested in how the schools are working with a project, which we will call X henceforth. What was the purpose with the project and what does it contain? What is missing in the former education, since the project was started? Are there any obstacles or prerequisite in the design of the project or in the school teaching on the basis of X? We have done interviews in the gathering of empirical material to find out all the answers to our questions.

The work has been carried out in cooperation with the company Zenit Design in Malmö. The project's goal was to restore, improve and produce an ozone generator. During the project, the authors sought relevant literature in databases, been in contact with US suppliers of fuel cell membranes, Asian suppliers for the processing of Teflon and Titanium parts in mechanical engineering and Swedish suppliers of various standard components. The authors had access to a temporary lab at Zenit and electron microscope at Halmstad University where material tests were performed. The authors have also had access to measurement equipment to measure amounts of ozone.During the work, the authors have mapped how an existing ozone generator works and then have their own development.

Detta examensarbete syftar till att utreda vilka skillnader som råder mellan livslängdsprovning för transmissioner i rigg respektive fält för hjullastare på Volvo Construction Equipment (Volvo CE). Hjullastare benämns maskin i den följande texten. Uppgiften har delats upp i tre delar; ? Kartläggning av riggens uppbyggnad samt vilka tester som utförs i rigg respektive maskin i dagsläget. ? Analysera vilka effekter dagens skillnader i testning har på de transmissioner som provas i rigg respektive maskin.