This study aims to investigate how small scale manufacturing companies reason around an implementation of a PLM-system, as well as the suitability of these systems compared to larger companies. The study is built on a qualitative method. Initially, secondary data was gathered through books, articles and reports. Primary data was gathered through four interviews. Two interviews were performed with PLM resellers, one interview was performed with a PLM developer, and one interview was performed with a small scale manufacturing company that opted to not implement a PLM-system.The results imply that overall differences between larger and smaller companies exist in regard to the need of PLM systems.

In this paper the possibilities to replace metal with plastic in products for the building industry were looked into. The first part was a market examination where several suitable products were found. After evaluation the door latch for in-house doors was selected to be re-designed to better suit the properties of plastic.New types of mechanisms were designed with different functions that use the benefits of plastic materials. Models of these mechanisms were developed to evaluate their function. The components in the different mechanisms were adapted for manufacturing with injection moulding.To confirm that the plastic material could handle the appearing stresses calculations on the most vulnerable parts were carried out.

This thesis is an attempt to understand how the traditional female gender identity is constructed and what kind of structures that are maintaining it. I also study how this identity is reflected in young women's conception of themselves and in their views upon whether they should sign in to the military service or not.The theoretical framework that I use mainly consists of theories about gender construction, male dominance and the woman's role in the nation-state.The purpose of using this theoretical approach is to illustrate that the traditional female gender identity consists of characteristics that are in opposition to the male ones. The woman should be weaker, less aggressive and more caretaking than men- in sum she is defined as the Other. The structures that constructs this identity is the male dominance, also known as the gender system and the patriarchy.This traditional female gender identity and citizenship role that historically has been allotted to women in the nation-state is still today very vivant in Sweden and is reflected in the fact that the military service is optional for women. Certain parts of this identity is also reflected in the young women that I interview, in their sense of probably not fitting in to the military service, because of their sex and the characteristics discussed above, that are associated with it..

Within the journalistic profession lays a commonly accepted normative view stating that objectivity is an ideal to seek. The aim of this bachelor is to study Swedish sportswriters on local newspaper and their views of journalistic objectivity, and themselves in comparison to the traditional ideals. We want to study how local sportswriter work against their ideal and if factors like age and education affect their view of themselves and ther ideal.We have done eight semistructured deepinterviews that all build on theories and studies of the traditional ideal of journalists. The interviewed are all sportreporters, at four different newspapers. We have done active selection of participants based on age and education.

The purpose of this master?s thesis is to investigate children?s librarian?s perspectives on children?s literature and reading of fiction books. This is a comparative study of Swedish and Lithuanian librarians. The main questions to be answered are how children?s librararians at public libraries motivate their selection and purchase of fiction for children and what kind of considerations there are behind the purchases.

The aim of this Master?s thesis is to examine how gender is described in some of the most popular children?s picture books in year 2007 and 2008. The theory used is based on Berger?s and Luckmann?s theory about Social construction, Bjerrum Nielsen?s and Rudberg?s theory about Gender socialization, Gens? theory How girls becomes women and boys becomes men and Hirdman?s theory about Gender contracts. The method used is an analysis of ideal types.

This diploma work addresses the question of how much energy is spent whenmanufacturing the components of a building as well as of how much energy is used inthe production of a building. The object of the studies is BioCentrum at the SwedishUniversity of Agricultural Sciences in Ultuna just outside the city of Uppsala. The aimof the work was to investigate how much energy was consumed when manufacturingand production in relation to the management, how many years the production wasrepresented. It was also a study in how mature the construction industry is to answerhow much energy was consumed in manufacturing.In order to get these answers a question form was developed and sent to thesuppliers to BioCentrum. In this form they were to respond to the quantity suppliedto BioCentrum and the amount of energy was spent when manufacturing thecomponents.

The purpose of this study is to achieve an understanding of how a CE- marking process is conducted and to identify the relevant factors that must be considered in such a process. We have conducted our study at Lo?vhults Svets & Smide AB (Lo?vhults) in Skruv, Sma?land Sweden, which are manufacturing brackets for small covering constructions.To understand how a CE-marking process is conducted several documents and provisions have been reviewed to achieve a basic understanding and insight of the subject. It thus led to that guideline ETAG 015 were studied and the factors to be considered in the CE-marking of brackets were identified. Together with Jan-A?ke Johansson at Lo?vhults we agreed on four different brackets to investigate for a potential CE-marking.

Aim: The aim of this study is to do a comparative study between Swedish Ethical equity Funds with Swedish traditional equity funds in terms of return, risk and risk-adjusted return.Theory: Sharpe ratio and Modigliani-Modigliani.Method: The essay will be based on a quantitative research method in which secondary data is the basis for the calculations. A statistical analysis was applied.Conclusion: The study concludes that there is no significant difference between the ethical fund group and the traditional fund group in terms of return, risk and risk-adjusted returns. The traditional fund group was those who had the best returns but only by small margins..

The national curriculum states that the school actively should promote that women and men have equal rights and opportunities and that there is a responsibility to counteract traditional gender patterns. However do research observations show that teachers often treat girls and boys differently. Studies show that the teachers are influenced by their conceptions and their expectations of gender behavior. The aim of this study is to examine how teachers in preschool and primary school discuss gender awareness and how they state that they work with gender awareness according to the curriculum goals of counteracting the traditional gender patterns.The study is inspired by the phenomenographic research approach and the empirical material has been collected by qualitative interviews with eight teachers in preschool and primary school. The empirical material has together with earlier research and theories been analyzed and discussed in order to reach a conclusion.

This report describes the development process of a pipe clamp used on exhaust system for cars. It is made based on the manufacturers desire to improve and make the clamp easier to manufacture and to reduce its price to their customers. This should be done either by manufacturing the clamp in one piece without an expensive and work intensive welding process, or by generating ideas of how to develop a brand new type of clamp. Investigating the market for similar products was done to eliminate intrusion of other manufacturers? patents but also to generate ideas.

AbstractResource efficient manufacturing is a term that has been increasingly applied within manufacturing, where one of the key points is to reduce waste of such forms that do not add value for the end customer. By the Lean principles, there are seven plus one types of waste, in which the definition of the eighth point varies among sources. In this study, the eighth type of waste has been interpreted as the untapped creativity and competence among employees that has not been put to use. From this, our question was incubated; How can you make the most of the employees? untapped creativity and potential within manufacturing? The case study will be developed with empirical data obtained from Dometic Group by conducting interviews.From the gathered literature, it was concluded that the communication between employees contributed to an increased understanding of one another as well as it allowed for improvement in work.

In this paper the authors examine three questions: 1) Is stealth marketing messages posing as status updates on Facebook a more effective way of advertising than traditional web banners? 2) What impact has learning about stealth marketing practices in social media on consumer attitude and post purchase behaviour? And finally 3) Will different generations respond differently to these questions?Our findings show that stealth marketing in social media is not more effective than traditional web banners. Furthermore, the result indicates that when consumers find out about stealth marketing practices it will have a negative impact on future purchase intensions and brand image. Most consumers will also have strong feelings of being deceived, which could instigate harmful post purchase behaviour such as negative word-of-mouth and possibly, based on some earlier cases, boycotts.The result of our research shows that the brand perceptions and future purchase intentions of Generation Y, persons between 18 and 30 years of age, are affected in a less negative way than the brand perceptions and future purchase intentions of older generations when finding out about stealth marketing practices in social media. However Generation Y:s reaction is still negative and they do consider traditional web banners to be more credible than status updates on Facebook.

During springterm 2010 Erik Persson and Magnus Hansson performed their ThesisWork with DIAB Laholm, in Hallands County for University of Halmstad.The project has been a product development project without exterior customers. Thusit had a great emphasis on functionality and less emphasis on marketing and such.This reflects the ambition to develop machinery to be used within the productionfacilities of DIAB Laholm, not to be sold to exterior customers.Main objective has been to create machinery which enables the production ofrotational symmetric work pieces within a NC-milling machine with 5 axles. Thework pieces milled will be made of DIAB?s material Divyncell with varyingdensities.The project has followed Fredy Olssons method involving Principal ? Primary ?Manufacturing constructions. However a complete manufacturing construction hasnot been made since DIAB just wanted a good Primary construction which will serveas a base for finishing touches at DIAB.By the end of the project material including calculations has been sent to DIAB andthey will finish the work and manufacture the machine if they find economic viabilityin this.The work method has been suited for this by several reasons, it was created withthese projects in mind and it?s also the method most familiar to us..

During springterm 2010 Erik Persson and Magnus Hansson performed their ThesisWork with DIAB Laholm, in Hallands County for University of Halmstad.The project has been a product development project without exterior customers. Thusit had a great emphasis on functionality and less emphasis on marketing and such.This reflects the ambition to develop machinery to be used within the productionfacilities of DIAB Laholm, not to be sold to exterior customers.Main objective has been to create machinery which enables the production ofrotational symmetric work pieces within a NC-milling machine with 5 axles. Thework pieces milled will be made of DIAB?s material Divyncell with varyingdensities.The project has followed Fredy Olssons method involving Principal ? Primary ?Manufacturing constructions. However a complete manufacturing construction hasnot been made since DIAB just wanted a good Primary construction which will serveas a base for finishing touches at DIAB.By the end of the project material including calculations has been sent to DIAB andthey will finish the work and manufacture the machine if they find economic viabilityin this.The work method has been suited for this by several reasons, it was created withthese projects in mind and it?s also the method most familiar to us..