In the next few years the pollutants loading at the Slottshagen wastewater treatment plant in Norrköping is going to increase due to the reason that one of the waste water treatment plant in the district will be shut down.A survey of how these different pollutants are divided in the treatment process is therefore necessary for mapping out both the loading and treatment efficiency.This can be achieved by studying mass balances.Mass balances were carried out for the water treatment process for the mechanical/chemical,biological and the chemical stage.The mass balance studies show that the treatment efficiency was very good. However in order for the mass balances to be quite consistent and to ensure complete coverage of results and conclusions i.e. more reliable results, sludge samples should be collected and taken at different times per day and the influent rate should be investigated.In this work mass balance has been set up in order to illustrate and identify the factors that should be considered and taken care of for further estimation using mass balances in the future. Furthermore this survey results in a calculating model for the mass balances at thisplant.This calculating model is used as a tool to facilitate future calculations for mass balances for the water treatment process at Slottshagens wastewater treatment plant.Moreover it provides a basis for carrying out further estimation of the treatment process in the near future.In this project the importance of some operating parameters was also taken in consideration.This calculating model can be modified so that calculations of such operating parameters i.e. sludge loading and sludge age can be easily performed.Such information can be used further to evaluate different operation alternative in order to ensure an optimal use of the treatment process with in the plant..

The current debate regarding organizational strategies for sustainabledevelopment is influenced by the theory of global governance. Decentralizedstructures of the global society are taken to use in the realization of a sustainabledevelopment. New roles of transnational networks and partnerships raisesquestions of the ability of global governance to co-ordinate and implement longtermsolutions without assistance from centralized and hierarchic structures basedon government. The aim for this thesis is to illustrate the current conditions forwell-functioning networks of sustainable development and examine therelationship between global governance and government. Issues of participation,decision making and compliance are examined by a case study of the Marrakechprocess, a global process to support the implementation of sustainableconsumption and production.

Purpose ? The purpose with this thesis is to examine how items can be distributed between stores inventory and an external warehouse. To achieve the purpose criteria that should be considered, how these can be prioritized and used when distributing items between stores inventory and an external warehouse will be examined.Method ? The study started by an examination of the theory that already exists within the subject. The already existing theory has then been examined in reality, on the furniture company IKEA Jönköping, where a case study with one channel has been performed.

The thesis has investigated how Sandvik Coromant could implement the SMED principle on one of their grinders groups and what improvements it would lead to. The aim of the thesis is to identify the current situation and investigate how their setup times would be affected by SMED. The work initiated with a literature analysis about the SMED principles and then proceeded with an analysis of the current situation where the activity was time mapped. The analysis consisted of time trials of the process that the thesis would include. The time studies revealed opportunities for structural improvements to create environment for a more structured process.

The purpose of this thesis was to study how an internationalization process to China may appear for a small Swedish enterprise and to identify important factors that may be essential for the process. The focus extends from the point where the enterprise makes its first connection with China up to the point where they are well established. Their business is up and running and they have begun production. To gain a deeper understanding of the subject a gathering of existing theory and research articles was conducted. The gathering of theory yielded knowledge of different approaches and methods that can be used to implement internationalization and provided a greater understanding of cultural and regional differences in China compared to Sweden.

Background: According to us, obtaining reimbursement of expenses in connection with a representation is a ?forgotten? process, and we therefore find it interesting to look further into. In some cases we have not claimed for compensation since we consider the process as too complicated or that we lost the original receipt. Ernst & Young (2009) say in their research that within the financial management area, Swedish operations loses billions of Swedish crowns due to bad routines. Okada and Hoch (2004) mention that if time were not considered as a resource, time would not be a hinder.

Title: The perfect candidate ? the selection process in a global organization.Authors: Kariin Adolfsson and Simon LeetsaarIn today's society, it becomes increasingly current with correct person on correct place in theworking life. What requires knowledge about how to recruit in a professional manner andreliable ways. In many bigger organizations, there is today a human resources department thatonly works with recruitment of new employees. The purpose with our research is to describepersonnel selection process in a big swedish organization, how they work throughout theentire process.

High quality within a Lean production system begins with standardised work, which creates stable processes able to generate predictable output. If nonconformity from the standard procedures occurs, routines are needed to analyse, correct and prevent the nonconformity from occurring again. In that way, the nonconformity can be a trigger for continuous improvements toward more stable processes. In takted production lines, where the operator follows a standard sequence with tasks set to be completed within the takt time, a nonconformity leads to downtime in the operator?s sequence, and no value is added.

Introduction     Knowledge has come to be an increasingly important factor for both individuals in the labor market and companies in competition. When a person leaves an organization the knowledge often follows, and a knowledge gap is created. When knowledge is shared within an organization, the individual?s knowledge is available for all members of the organization. Knowledge can thus be converted from human capital to structural capital.

This essay is focusing on leadership and motivation in the creative process. The perception on the leadership has changed over time. Today?s leadership theories suggest that the leadership should be adapted after the organisations conditions. Due to the increasing globalization, companies are forced to operate in an increasingly competitive market.

This essay investigates the statements of Växjö municipality?s motives for some of its many environmental projects. The aim of the essay is to be theory-testing as to see how a municipality/city which promotes itself as being ?green? motivates its efforts in the environmental area. Växjö city promotes itself as ?The greenest city in Europe?, an award appointed to the city by BBC and other international media.

Do ceramics have to be static? This was the question that spurred me into this work, and what kept me working on to achieve the possibility of motion in my ceramic objects. By combining the knowledge gained through my former education as an avionics technician with my interest in the ancient ceramic craft, I strive to create kinetic ceramic handicraft suitable for interaction with an audience.By a series of different phases I slowly go from understanding what kind of motion I want my objects to have, to actually realizing this motion in three-dimensional objects. Through the use of simple models made from corrugated fiberboard followed by more advanced plaster models, combined with different complementary materials such as bicycle inner-tubing and recycled aluminium cans among many others, I, through a vast series of testing, slowly build up a knowledge base later applied to the ceramic objects.The result is for me a success; I have found a way for me to combine ceramics with mechanics. Through this I have created kinetic ceramic handicraft intended for interaction with an audience..

The author of this report has created a Web-based invoice system and CRM at therequest of the company Webhouse.se. The purpose of the System is to makeeveryday tasks in the company easier. The system also needed to prevent mistakesand errors by managing orders and invoices.The system has been created with the company?s requests in focus. During thedevelopment of the system information security and interaction design have beenimportant aspects that have been taken into consideration.The system has been created using techniques such as PHP and MYSQL.

Sahlgrenska Academyat University of GothenburgDepartment of internal medicine and clinical nutritionAbstractTitle: Can exclusive enteral nutrition replace steroid treatment in pediatric Morbus Crohn?Author: Hanna Rymark Lehnér and Josephine PetterssonSupervisor: Mette AxelsenExaminer: Anna WinkvistProgramme: Dietician study programme, 180/240 ECTSType of paper: Examination paper, 15 hpDate: May 23, 2012Background: Morbus Crohn is a chronic inflammatory bowel disease which periodically causes great suffering for the patient. There is solid scientific evidence that treatment with steroids effectively induces and preserves remission. However, side effects are many and a great risk for stunted growth and skeletal development exists in children. A widespread view is that exclusive enteral nutrition is as effective as steroids in pediatric Crohn´s.

Alstom Power Sweden AB in Norrköping isexpanding their business in the presentsituation and has implemented aprocedure for reverse engineering as apart of this work. Reverse engineeringat Alstom is an extensive procedurethat is calculated to be performedunder very time demanding conditions.This thesis is a continued exertion ofthe implementation process in order toidentify and describe the mostimportant process steps in purpose to beable to manage and improve theprocess.This thesis was written with twoprimary objectives. The first was todescribe and map out the procedure torecreate technical data of a turbineblade, based on a validation of thereverse engineering process that hasbeen performed at Alstom in Norrköping.The second purpose was to describe thekey factors to achieve successful usageof reverse engineering that have beennoticed in the literature study.The work is based on a literature studyon the subject reverse engineeringwhich produced the theoreticalknowledge of the method to reproducetechnical data to a product. Theliterature study has also led to adescription of reverse engineering froma legal perspective to clarify how farit is allowed to apply the methodaccording to the patent laws. With theliterature study as support and furtherhelp and guidance from individualswithin the reverse engineering unit atAlstom, a complete picture andunderstanding of the process has beenproduced and documented..