Nanofiltration is a proper way of preparation of drinking water. The process has a lot in common with reverse osmosis where a semipermeable membrane is used to separate a pure water flow from the remaining water. A pilot plant was used to ensure that nanofiltration is a suitable technology for a specific waterworks station in Glemmingebro, Ystad. The purpose was also to find out if a pH-adjustment is needed for feed water in a possible full scale plant.  In this case nanofiltration is used mainly to remove sulphate and calcium since the raw water contains concentrations of these substances which exceed the limits for potable water. It is important to receive a high recovery (RC), otherwise the deliviery of water won?t be high enough.

The last decades the populations of wild boar (Sus scrofa) has increased rapidly over the species? entire European range, including Sweden. This is followed by increasing human-wildlife conflicts as a result of the wild boar foraging behavior, causing damage to agricultural crop fields due to trampling and feeding. To be able to minimize damage we need more knowledge of where in the fields the risk of damage is high and what features in the landscape that affect this risk. I analyzed damage distribution in relation to the distance to six different landscape features; forest, road, ditch, building, game field and bait station, in the study area, the Island Mörkö in eastern central Sweden.

This project has revolved around finding better ways of overseeing vibrations of the gearbox at a wind power station. The gearbox has been a huge problem at the stations located at Gässlingen and the sooner the warning of an incoming breakdown is at hand the more money you can save from preparations. The work has been carried out together with Askalon AB in cooperation with consults from ÅF. Askalon is a company with a department focused on overseeing vibrations and it is in collaboration with that department the work has been carried out. During this work, new positions for the sensors and new methods of gathering and analyzing data have been worked out. This was then implemented at a wind power station to be tried out on site.

A totally mixed ration (TMR) is a mixture of all the necessary feed components for the cow. She will eat the exact same feed in every bite which will make the rumen pH more stable and always supply her with a constant proportion between roughage and concentrate. This will make it possible for the cow to eat more dry matter (DM) a day because the fibre requirements are fulfilled. If a part of the concentrate is given separated from the mixture it is called partly mixed rations (PMR) and is almost always used when using an automatic milking system (AMS). When using TMR and PMR it is important to have a high hygiene, be accurate when mixing the feed and to look after cows in a good and strict way. The aim of this study was to document different farms with PMR in an AMS to see which routines they have and how they are managing their production.

Detection of leukocytes in semen from boars is part of the routine control of semen quality. Leukocytes in semen can cause damage to spermatozoa that leads to impaired fertilization. In the artificial insemination (AI) industry there are standard routines for the quality control of the boars and of the neat semen before use. Since 2001, Quality Genetics has not done the leukocyte examination on semen samples from boars which are used for the production of pigs for slaughter. The purpose of this study was to investigate the occurrence of leukocytes in semen from AI-boars. The questions addressed were whether there are boars that have leukocytes in their semen and how frequently it occurs and, moreover, if there are differences between breeds, or even between individuals whose semen was checked before use in AI-dose production compared to those which were not. The study included a total of 135 AI-boars, of which 67 were Hampshire, 35 Yorkshire and 33 Landrace, all belonging to Quality Genetics AI-station in Hållsta.

Construction of an autonomous wind station was a project with the goal of creating a product that could collect wind data from a sensor and then transfer this data to a server wirelessly over the GSM network. The device would be powered by batteries and solar cells and function fully without requiring external power supply. This required that a small computer was constructed and programmed to store and send data at predetermined cycle times and programming of a server that received the sent data. The project also required optimization of power consumption and dimensioning of solar cells and batteries based on this. The construction of this station demanded research both for the selection of hardware and programming software. The computer was based on a microcontroller and a GSM module that sent the data over the 2G network.

Den svenska rennäringens primära inkomstkälla är försäljning av renkött. Syftet med denna uppsats är att undersöka ett antal faktorers inverkan på utbudet av renkött. Metoden ordinary least square har använts för att göra en ekonometrisk studie baserad på statistik för åren 1980-2003. De faktorer som testats är total ersättning, vilken inkluderar avräkningspris samt kvantitetsbaserad subvention, och renstammens storlek. Resultaten i vår undersökning visar att total ersättning inte är signifikant på någon testad nivå, däremot fann vi att renstammens storlek hade positiv korrelation med utbudet på renkött.

In Sweden there are 1894 small-scale hydropower plants in operation, which together generate 4.3 TWh of electricity per year according to Swedish hydropower compound (SVKF, 2011). This corresponds to the annual consumption of about 860,000 Swedish households (based on an annual consumption of 5000 kWh). In the mid-1950s there were around 4000 small-scale hydropower plants in operation in Sweden before cheap fossil fuels and uranium competed with them, in the current situation only 1,894 of these are in use. If slumbering small hydropower plants once again would be taken into use and some new ones are built, we would be able to extract about 7 TWh of renewable electricity from these annually in Sweden, representing about 1.4 million households.The thesis intends to calculate and construct a hydroelectric power plant at the existing dam in Olofsfors and give suggestions on how the power station should run during the time that fish migration is greatest in Leduån.The turbine and generator to the station in Leduån at Olofsfors is designed by the height of the fall and the water flow through the dam. The turbine selected for the station is a CK-1000RM turbine with a 4-pole 250 kW generator from Cargo & power turbine Sweden AB, which is expected to deliver 1.2 GWh per year.

This Thesis in Military Technology deals with experiences drawn from the forced introduction of Weapons Station 01, 2009. The work aims to identify the experiences regarding the forced procurement of military equipment to see how they can develop normal and fast procurement of equipment. The main conclusions of  this work, is to achieve greater capability and increase the military utility, are: -          Common objectives and priorities of stakeholders-          Response and joint types shall determine requirements for system-          Ensure an integrated project team also at lower levels-          Engage the integrated logistic support early in the materiel process-          Include Armed Forces staff as early as possible in the testing and validation-          Prioritize work to facilitate the rapid development of decision on use (BOA)-          Provide back up for increased redundancy in the mission area .

Our report procedure identification of instability and disturbance in an automatic manufacturing line of processing and assembling of chair sliding rails at Sapas manufacturing department in Vetlanda.To obtain a stabile ground we have mapped the material flow to receive a comprehensive view and to visualise connections.We have examined cycle times at different stations in purpose to identificate bottlenecks. The result of our examination showed that the bottleneck of the line was the brush station. This leads to that the expected bottlenecks identificated by Sapa gets a delay time and by that a longer cycle time.Interruptions has a clear negative influence at the line performance so we have also assemble data through the operators report list and compiled these in order to find out the interruptions effect on the line. The outcome during our assembled period was that the reported interruptions corresponded about 30 percent of the total available production time. This has a clear negative effect on the line productivity and efficiency as we have calculated in order to get the present status..

Eco-design is all about improving products environmental performances throughout the products lifecycle by including the environmental aspect into the product development process. There are a large number of different tools that can be used for this, but there are several factors that can affect which one will be the best to use. Some tools for eco-design takes comprehensive studies and can only be performed by experts, while some tools can be used more time- and cost efficient and with basic knowledge. The choice of tool should be based on the company?s situation.This report describes the research of how the design and furniture company Blå Station could include a tool for eco-design in their product development process.

For att brytning under jord ska vara mojlig maste stora mangder frisk luft pressasned till brytningsnivan, vilket gors fran olika gruvventilationsstationer. For att undvikanedisning i schakten varms tilluften upp till 1. innan luften transporteras nedi berget. Idag sker denna uppvarmning av varmebatterier som nyttjar spillvarmefran kulsinterverken. Finns ett extra varmebehov spetseldas det med olja.Franluften ar fuktig och varm.

Nanofiltration is a proper way of preparation of drinking water. The process has a lot in common with reverse osmosis where a semipermeable membrane is used to separate a pure water flow from the remaining water. A pilot plant was used to ensure that nanofiltration is a suitable technology for a specific waterworks station in Glemmingebro, Ystad. The purpose was also to find out if a pH-adjustment is needed for feed water in a possible full scale plant.  In this case nanofiltration is used mainly to remove sulphate and calcium since the raw water contains concentrations of these substances which exceed the limits for potable water. It is important to receive a high recovery (RC), otherwise the deliviery of water won?t be high enough.

The names of railway stations and halts along the earliest railway lines on Lithuanian territory have been studied, i.e. along those railway lines built between 1861 and 1873. Especially, attention has been drawn to names that are not obvious regarding the geographical location of the station or halt. Some 50 percent of the names are showing some kind of irregularity in this respect. Most common (about 30 examples) are stations or halts that are serving a population centre situated at some distance from the station, but still bearing the name of that population centre.

Eutrophication is a major problem in the Baltic Sea, as a result of increased loading of nitrogen and phosphorus. In the coastal parts of Östergötland the soil largely consists of clay and contains high levels of phosphorus bound to clay particles. Erosion of the soil in agricultural areas makes the water turbid and transports phosphorus to the Baltic Sea. The aim of this project was to examine the relationship between phosphorus and turbidity in the coastal streams of Östergötland. The aim was also to evaluate the possibility to use turbidity as a surrogate measure for phosphorus.