The current field of research concerning the impact of railroads in Sweden beside from the State main-line network is relatively narrow. Including cultural impact to the area narrows the results even further. The purpose of this study is to open the field even more into the local societies and to what extent the impact of the introduction of railroad might have had on smaller county villages. Sweden holds a unique position concerning ?station towns? or ?railways towns? in terms of railway policy and the industrial development in towns that were affected by the railway, as the affected towns continued development were based on a hybrid between direct democracy and adaptations of city-law policies.This study takes place in Kisa, a small town in southern Östergötland that during the beginning of the 20th century turned into a municipal community due to the building of Östra centralbanan (roughly translated Eastern central-line).

I was assigned to the thesis as part of a project GMA AB (Ground Machinery Applications AB) is running. The project aims to develop a new method for injection of drilled holes in rock walls. Currently, the injections usually involve cement but the basic idea of the project is to replace cement with a supplement called Silica sol.Silica sol is known as a gelling liquid. The gel time is controlled by a mixing of saline. Depending on the amount saline that gets mixed in, the gel time varies.

ABB Capacitors is looking to introduce LEAN within their organization. The purpose of this research is to suggest ways to improve the production planning in order to facilitate the company?s production processes. This should be done in accordance with the LEAN concept.Today, ABB will produce two of the customers? orders at the same time.

Nowadays Wireless LAN is playing a more and more important role in network systems. After 1999, in which the IEEE organization published its Wireless Local Network standard 802.11[1], many people saw the advantages of the standard but also the lack of support for multimedia streaming. A lot of research work has been done on the proposed IEEE 802.11e standard draft during the past 4 years. It is supposed to be able to fully support Quality of Service. The final version will be published early in 2004.

This report describes a study of two different methods to achive the best possible result in setting out apartment details. These two methods are the setting out of details with a measuring tape from baselines and the setting out procedure with an instrument (totalstation).Through our knowledge in surveying and mapping technology and help from a carpenter, this investigation has been implemented. The setting out using a tape has been performed by letting the carpenter to set out windows, bathroom and water- and drain-details from baselines and drawing. The setting out using a surveying instrument was carried out by means of a Trimble Total station. These two methods have been compared in order to detect and show the difference that occurs.The report shows the investigation background story from the practice of Swedish Mätcenter in Karlstad.A result of differences in accuracy and time is described in the report, as well as their theoretical consequences.

När en stad växer måste man ta ställning till hur det ska ske. Idag är biltrafiken dominerande i Göteborg och i framtiden skulle spårbunden trafik och utbyggd pendeltågstrafik i regionen kunna innebära mer hållbara tranporter. En pendeltågsstation har ett relativt begränsat omland och behöver för fullt utnyttjande bebyggas nära inpå. Den spårbundna trafiken kan dock innebära störningar och risker. Jag undersöker i mitt examensarbete hur en ny stadsdel utanför Göteborg kan byggas ut kring en tänkt pendel­tågs­station.

Furulund är en mindre ort i Skåne som står för en stor förändring när orten får en tågstation..

The purpose of this master thesis is to implement and validate a Power System Stabilizer (PSS) to a generator at Trängslet hydropower station in Dalarna, Sweden. Problems with local rotor oscillations can occur at the hydropower station when power is transferred on a new power line (130 kV) from Northern to Southern part of Dalarna. To ensure good operation properties on this power line Fortum Generation AB and Fortum Distribution AB wants to activate a PSS on a generator.There have been investigations in which situations and what equipment that contributes to rotor oscillations. When this is known the PSS is tuned to damp these oscillations by choosing a good set of parameters. The most important parameters for good performance are to choose amount of gain and phase compensation.

The situation at Plastal AB is following; the plant in Simrishamn has not capacity enough but the plant in Kristinehamn has unused capacity. My task with this master thesis is to build a logistic flow between this two plants, optimize purchase quantities and ensure delivery safety.The production of the Intermediate Section (LS) will be divided between the plants. The LS will be produced in the following way; the injection moulding process will be done in Simrishamn and the assembling and lacquering processes in Kristinehamn, The reason to divide the production is to ensure delivery safety. Plastal AB can not move the whole production of the l.S because the two plants have different processes (moulding res. injection moulding).When the 1.5 has been transported to Kristinehamn following moments are included in this order; lacquering, welding and assembling.

När en stad växer måste man ta ställning till hur det ska ske. Idag är biltrafiken dominerande i Göteborg och i framtiden skulle spårbunden trafik och utbyggd pendeltågstrafik i regionen kunna innebära mer hållbara tranporter. En pendeltågsstation har ett relativt begränsat omland och behöver för fullt utnyttjande bebyggas nära inpå. Den spårbundna trafiken kan dock innebära störningar och risker. Jag undersöker i mitt examensarbete hur en ny stadsdel utanför Göteborg kan byggas ut kring en tänkt pendel­tågs­station.

This report is about accessibility in a station environment. Studies have been made about how an accessible building should be designed. Accessibility is an important issue when striving for a society with equality as the foundation. Sweden is one of the most accessible countries when speaking about the built environment. A result of prosperity and a well-managed democracy.

Jämtkraft AB which is a power production company in Sweden has bought two newhydro power units to their station in Hissmofors. The two new generators are using aconcept with sliding stator feet to handle the thermal expansion.The concept with sliding stator feet on hydro electric generators has not beenworking satisfactory on many hydro power stations in Sweden and has caused a lot ofcosts due to long downtimes.The new station in Hissmofors is very important for Jämtkraft AB, and therefore theywant to know how to make sure that the sliding stator feet are working as theyshould. According to theories and a simplified model of the generator the stator feetdisplacement should be around 1 -1,6 mm.The generators are delivered with a surveillance system that will measure thedisplacement of the sliding stator feet. The signal from the system isn?t accessible forJämtkraft AB but it will alarm when the sliding stator feet are malfunctioning.To secure the function of the sliding feet a logger for the surveillance system or adifferent measurement system must be used; if both systems are used Jämtkraft cansecure the function of the surveillance system..

ABSTRACTThe aim of the observation study was to examine the dental hygienists working tasks and the time they used carrying them out. Four dental hygienists where observed during four days each. The total time the dental hygienists used with patients during sixteen fulltime days come to a sum of 89 hours of the possible 111 hours. Twelve hours was late cancels and time when patients didn?t come to their appointment and ten hours were used for meetings.

Umeå Energi are working towards a goal, that in the year of 2018, they will be completely climate neutral. As a part of this, one target is to reduce their grid losses by 4 % of the 2012 level, which corresponds to an overall reduction of the grid losses of just over 1.7 GWh. In many residential areas, the distribution grid is designed and rated for electric heating as the heating in the houses. As many of the houses later has been converted to other types of heating, their electricity use has decreased and the total power output from many of the secondary substations has decreased significantly. Because of this, many of these stations today are well oversized, which in turn means that the energy losses in these stations are unnecessarily high.In this degree project, 25 secondary substations have been studied, all located in residential areas in and around central Umeå.

The hybrid larch (Larix x eurolepis Henry) is a fast growing tree species and was introduced in Sweden for about 50 years ago. The high growth and expected resistance to diseases are probably the main reasons of introducing the tree species into the Swedish forests. The purpose of this thesis was to document the production of hybrid larch planted in the Snogeholm landscape laboratory and to compare the production in the pure hybrid larch stand with the mixture together with pedunculate oak (Quercus robur). The data collection in Snogeholm since the establishment has been carried out by the Swedish University of Agricultural Science (SLU). The fieldwork for the thesis was carried out in 3 stands, containing hybrid larch, pedunculate oak and a mixture of hybrid larch and pedunculate oak, in order to be able to compare the total stand production of the areas. The results show that the total production of hybrid larch in the mixed stand only is 35 % compared with the total production of hybrid larch in the pure stand. Therefore, the hypothesis that the total production of hybrid larch is equal to the planted mixture with pedunculate oak was rejected. The other hypothesis that the total production of a 2 hectare large stand containing a mixture of hybrid larch and pedunculate oak would be greater than the total production of two pure stands of 1 hectare containing hybrid larch and oak each was also rejected. In the studied case the total production was 45 % greater if hybrid larch and pedunculate oak was planted in pure stands. The results from the case-study only indicate that the total production of hybrid larch and oak under the investigated conditions can be higher when planting the two species in pure stands compared with a mixture of the two species.