The construction business is one of the most accident prone businesses in Sweden. In order to make it safer it?s vital that all employees of a company report all accidents and incidents that occur. This report intends through qualitative interviews, to analyze the knowledge and attitude towards incident reporting among the employees of the Swedish construction contractor JM.The goal of the thesis work is to hopefully contribute to an increase of employees? awareness on those issues.

This examination report is a part of a program for Industrial organisation and Economics with specialization in Logistics and Management at Jönköping University. The report contains an analysis of the internal material handling at Kongsberg Automotive, and also an improvement proposal for a new material handling system.The aim with the report is to find a better material handling system and also make an analyse of the existing system. The goal is to shorten the distance for the operators when they order material, and also to increase the productivity.The investigation methods for the report have for the most part consisted of observations and interviews of key-persons who daily work in the production. During some time the actual material handling-system has been observed and some shortcomings have been discovered, and these are also discussed in the report.The shortcomings that have been discovered are for once the indistinct signal that should signal need of material in the production. Some other activities have also been discovered that does not bring any value into the final products.

This report aims at giving you as a reader a basic knowledge in measurement techniques used in the road/land construction and witch instrument and methods that is commonly used. It also tries to shed light on the problem with unfinished or incomplete blueprints, which cause additional work performed by the surveyor. This report is written in collaboration with PEAB Umeå whom has given insight in their work.The goal of this report is to examine what kind of work surveyors has to perform on blueprints delivered by a technical consultant. The reader of this report gets a run-through of the different theoretical measurement techniques used today and a short explanation of different measuring instruments used by surveyors in their day to day work. Computer programs used in the field of construction are briefly explained, and some of the most common file extensions used, for example dwg and Land-xml.The report concludes in a questionnaire that was sent out to surveyors employed by PEAB.

This report describes the work with creating a CMS (Content Manager System). A CMS is a web tool so you easy can publish materials on your web page. With a CM Scan you can without any knowledge of programming web pages create and maintain a web page. This will result in that you and your organisation save time and money. You can also split the responsibility for the webpage in different roles, but still keep the control.

This report is focused on a research to find out if the Customer Relation Management (CRM) of Quicknet AB works and if their customers are satisfied with it. During this investigation I tried to see if the customers had a need for taking the CRM and use a tool called Social CRM. The report will conclude if the clients of Quicknet think that there is something that can be done in the relation between both parts and how it can be improved. At the same time I am going to build an application which relates to the problems of this report.To solve the problem I am going to do a survey which will include the CRM and also try to find out if the customers of Quicknet share the same thoughts about having a Social Customer Relation Management. Also if this survey shows what the customers think about the CRM, it could improve the relation between Quicknet and themselves. The result from the survey showed two things.

Construction companies are frequently criticized for high prices and long construction time. At the same time, statistics shows that construction workers are on the sick-list for occupational injuries or casualties more than other groups at the labour market.Skanska built a block of flats with tenant-ownerships in Gävle. The construction consists of concrete walls with in-fill walls in the front. The purpose with this degree project is to perform a risk analysis in work environment with focus on repetitive strain injuries and control the time report for in-fill walls manufactured in a field factory. The result of this project will help to make more realistic cost predictions in the future.This degree project has been performed in cooperation with the construction company Skanska.

This report describes the work with creating a CMS (Content Manager System). A CMS is a web tool so you easy can publish materials on your web page. With a CM Scan you can without any knowledge of programming web pages create and maintain a web page. This will result in that you and your organisation save time and money. You can also split the responsibility for the webpage in different roles, but still keep the control. We have chosen to create our CMS in a script language called php4 and with the database server MySQL, we have also used JavaScript a lot.

Sustainability questions that concern the subjects of environmental and social aspects are increasing in today?s society, and therefore the sustainability report is a way for companies to show their work with sustainability development by working with a clear report and follow up. As the first country in the world, Sweden has decided, as from the financial year of 2008, that all governmental owned companies should present a sustainability report according to the guidelines of GRI. The aim of this essay was to identify and analyze actual events from a sustainability aspect for Vattenfall, from a medial perspective during the time period 2005-2009. We made a content analysis of one company?s sustainability reports during a time period of five years and we connected this to the medias reports of the company from the same period, to see if there were any connections between the subjects that media had elucidated.

The purpose with this report is to give structure to the storage area betweenproduction and packaging at Spaljisten AB in Åseda. The purpose is also to givesuggestions for improvements of work tasks and thereby simplify and improve thematerial handling at the packing process.The background of the task is that Spaljisten AB is going to increase theirproduction and thereby they also need to increase the packing rate of theirproducts. They will manage this by installing a new automated packing line andincrease the efficiency of the old manual one. The theoretical background ismostly obtained from literature which contains relevant facts for our report.The storage area has been studied visually in order to search for improvements oftoday?s layout.

The report contains a comparison between computer based modeling of evacuation and evacuation experiments with large crowds. Crowd movement, behavior and management is examined, as well as the evacuation time. The conclusions in this report are based on observations made during the evacuation of a football ground (Swedish)..

The purpose with this report is to give structure to the storage area betweenproduction and packaging at Spaljisten AB in Åseda. The purpose is also to givesuggestions for improvements of work tasks and thereby simplify and improve thematerial handling at the packing process.The background of the task is that Spaljisten AB is going to increase theirproduction and thereby they also need to increase the packing rate of theirproducts. They will manage this by installing a new automated packing line andincrease the efficiency of the old manual one. The theoretical background ismostly obtained from literature which contains relevant facts for our report.The storage area has been studied visually in order to search for improvements oftoday?s layout.

Our report procedure identification of instability and disturbance in an automatic manufacturing line of processing and assembling of chair sliding rails at Sapas manufacturing department in Vetlanda.To obtain a stabile ground we have mapped the material flow to receive a comprehensive view and to visualise connections.We have examined cycle times at different stations in purpose to identificate bottlenecks. The result of our examination showed that the bottleneck of the line was the brush station. This leads to that the expected bottlenecks identificated by Sapa gets a delay time and by that a longer cycle time.Interruptions has a clear negative influence at the line performance so we have also assemble data through the operators report list and compiled these in order to find out the interruptions effect on the line. The outcome during our assembled period was that the reported interruptions corresponded about 30 percent of the total available production time. This has a clear negative effect on the line productivity and efficiency as we have calculated in order to get the present status..

This report describes a study of two different methods to achive the best possible result in setting out apartment details. These two methods are the setting out of details with a measuring tape from baselines and the setting out procedure with an instrument (totalstation).Through our knowledge in surveying and mapping technology and help from a carpenter, this investigation has been implemented. The setting out using a tape has been performed by letting the carpenter to set out windows, bathroom and water- and drain-details from baselines and drawing. The setting out using a surveying instrument was carried out by means of a Trimble Total Station. These two methods have been compared in order to detect and show the difference that occurs.The report shows the investigation background story from the practice of Swedish Mätcenter in Karlstad.A result of differences in accuracy and time is described in the report, as well as their theoretical consequences.

My questions at issue for this report has it´s beginning in the growing problems of thenegative effects of burning fossile fuels and the rapidly growing energyprices.1. Is it possible to design a micro scale powerplant?2. Is it economically interesting for a potential customer to by such a product?The aim with this report is therefor, with the help of design work and calculations, to answerthese questions and to create a platform for building a fully functional micro scale powerplant.The material used in the report is mostly product catalogs from various industries but alsostudy course littrature about steam engines.The result of the report is that it is fully possible to design a fully functional micro scalepower plant.

The construction industry stands as one of the industries in Sweden where most employees tend to encounter accidents. At the same time, the Swedish authority of work environment estimates that there are large numbers of hidden statistics with accidents and incidents that never gets reported. To prevent accidents, the Swedish authority of work environment has decided that every company have to, beside report every accident and major incident to the authority of work environment, keep statistics and evaluate every incident that happens at their places of work.The people responsible for work environment at the Swedish building contractor Peab, believe that it is only a fraction of all incidents happening at their construction sites that actually gets reported. The purpose of this study is to investigate the reason why employees of Peab do not report incidents. By an inquiry and interviews with both craftsmen and office holders at Peab Bygg Öst 1, the employees? attitudes and knowledge have been studied and evaluated.The study shows that the craftsmen´s knowledge of incidents is relatively low.