This report is a B.Sc. Forestry thesis work at the school for Forest Management, SLU. The work was an assignment from the forest owners? association Mellanskog. The aim of the work where to investigate the economical result of removing undergrowth trees before first thinning, and a follow-up of the contractors and their compliance with Mellanskog standards. This thesis work was divided in three parts: The first was to find a relation between the net volume from the first thinning and the cost of cleaning undergrowth trees. Secondly there was a follow-up in the field, to investigate whether the contractors have done the undergrowth cleaning according to Mellanskog?s directives.

This thesis has been carried out in cooperation with Burseryds Bruk AB.Burseryds Bruk is a company that manufactures steel strapping. The thesis isabout developing a concept of protection that should be used to protect theoperators from the rotating parts of the machinery lines. The aim of the projectwas to improve work safety for operators working at the machines by producing aconcept for a protective device. The project's first part was based on ergonomic data collection methods tounderstand the operations performed on the machine and the hazard occurringduring the process. The methods used to collect data were, interviews,observations and questionnaires with the operators of the company. This was thenused to make the ergonomic analyzes hierarchical task analysis and link analysis. The data collected from the company's operators was used create 10 conceptswhich were then evaluated.

An investigation of the heat impact of laser cutting on the material properties when producing tensile and impact test specimens of different steel types of varying thickness has been performed. The purpose of the thesis project was to provide recommendations regarding how much material that needs to be milled from the laser cut edge before tensile and impact tests. The study has been performed partly by investigating the test specimens by heat camera when the specimens were cut in the laser cutting line and partly by performing hardness tests, investigation by microscopy, and tolerance and roughness measurements and tensile tests of the laser cut material and material produced in the traditional multi operation machine. The results show that the heat affected zone in the thicker materials is greater than previously thought of, and that the currently used recommendation has to be adjusted. The study clearly shows that the thicker the material, the greater the heat affected zone, independently of the steel type, since the thicker material takes longer time to cut.

The purpose of this study is to examine how employees in an organization using flexible work practices, experience that passive face time influences the evaluated of them. Further, the study aims to understand to what extent that perception of passive face time motivates the employees to spend more time at the office than is necessary for their work situations. The study concludes that employees in general perceive that passive face time does influence how they are evaluated and that this perception motivates employees that are relatively newly employed by the company to spend more time at office..

Improved wireless datacommunication with the forest machines might be the next big step in the logging process. The use for wireless communicationsystems within the forestry is among other things to report the production from the forest machines, to supply the machine opera-tors with the right information and for safety. CDMA2000/ 450 is a third generation mobilecommunicationsystem which could replace the old NMT- 450 and for comparatively low costs. The reason for the low costs is that you only have to use the old NMT- 450 masts and supply them with new equipment. In the test of CDMA2000/450, that has taken place in northern Uppland, two kind of files have been sent.

This report is a B.Sc. Forestry thesis work at the school for Forest Management, SLU. The work was an assignment from the forest owners? association Mellanskog. The aim of the work where to investigate the economical result of removing undergrowth trees before first thinning, and a follow-up of the contractors and their compliance with Mellanskog standards. This thesis work was divided in three parts: The first was to find a relation between the net volume from the first thinning and the cost of cleaning undergrowth trees. Secondly there was a follow-up in the field, to investigate whether the contractors have done the undergrowth cleaning according to Mellanskog?s directives.

This thesis examines why working time preferences differ between workers and nations, and explains the effect of working time regulation and working time flexibility on negotiating work-life balance. In five separate sections the following working time issues are examined: the number of hours worked by workers in Europe; factors affecting individual working time preferences; how working time preferences are negotiated in the national industrial relations systems of Sweden, France and the United Kingdom; how the institutions of the European Union have influenced working time negotiations through the Working Time Directive; and the benefits and practices available to organisations implementing working time flexibility. Broadly this paper views working time preferences as being a highly personal and influenced by factors such as wages, taxation, culture (national and workplace) and non-work responsibilities. It is argued that negotiating a preferred working time pattern is essential to achieving work-life balance and when such a balance is achieved, workers are more healthy, motivated and committed to their employer. Essentially this provides an incentive for businesses to voluntarily implement working time flexibility beyond the regulatory standards..

This thesis presents the results of the implementation and evaluation of two machine learning algorithms [Baz98, GB97]based on notions from Rough Set theory [Paw82]. Both algorithms were implemented and tested using the Weka [WF00]software framework. The main purpose for doing this was to investigate whether the experimental results obtained in [Baz98]could be reproduced, by implementing both algorithms in a framework that provided common functionalities needed by both. As a result of this thesis, a Rough Set framework accompanying the Weka system was designed and implemented, as well as three methods for discretization and three classi cation methods. The results of the evaluation did not match those obtained by the original authors.

In Sweden, harvesting pre-commercial thinning (PCT) stems for energy purposes is a interesting way of financing the high cost of preparing dense stands for a profitable first conventional thinning. This concept can be labelled bioenergy thinning. The aim of this study was to quantify the productivity of a Vimek 404R light harvester with an accumulating Naarva-Grip cutting head during the bioenergy thinning of a self-regenerated stand west of Sunnansjö in Dalarna. The stand was birch-dominated, contained 15 371 stems/ha, and measured on average 4,6 cm Dbh and 7 m tall. Even though the driver was well experienced with the machine, the stand in question was the first one that he ever thinned in this manner. Nevertheless, the driver strived to accumulate as many stems as possible during each crane cycle and chose to cut taller stems in half so as to make the handling and forwarding of the harvested stems easier.

During the winter 2011 Isaksson and Andersson did a time budget study on Nordens Ark?s Przewalskis horses during daytime when there were visitors and caretakers in the park. This time budget study was made during daytime and when there were no visitors or caretakers in the park. The horses where observed in the morning (5.30-6.30 am) and in the evening (5.45-6.45 pm) during four days. In addition to a time budget, the horses? positions in the enclosure were registered.

The views on and the knowledge of the introduction of iron to Scandinavia have change by the history of archaeology. The results and discussions are put in the context of time and how that time is reflected in their work and texts. This limits that scholars put up to orientate themselves conceal the complex reality. The limits are changing all the time and is dependent of time and person..

This study examinates technology's traumatic impact on the male subject in The Atrocity Exhibition by J.G. Ballard. In my analysis I show how the protagonist uses a fetischistic strategy in order to make sense of the trauma that technology embeds. Paradoxically it proves to be the agent of his trauma, but also functions as his shield. The machine is thus in a position of the hinge, the point in a structural system that both enables and deconstruct the system.

The essential thing about breaks has been in relation to time, body, movement, force and room during my examination. Through conversations high-school students from two schools have taken part in this study. The examination is based on conversations with the students and has focused on students? experiences of breaks, and is also carried through by the method of phenomenology. The results of my studie show that students - during their breaks - experience a feeling of allways heading for something and also that time seem to exist in three levels: filled time, non-filled time and flow regarding of time.

The market is developing and a growing competition increases pressure on companies to maintain their competitive advantage. Working with cost savings is a way to enhance earnings in a short term but also in a longer perspective. Volvo Powertrain Production Köping has an overall goal; to reduce costs by nine percentages in three years. To achieve the goal, Volvo Powertrain Production Köping works with World Class Manufacturing where the Department of Processing Technology constitutes an important part.Volvo Powertrain Production Köping lacks a standard for how savings within the metal cutting tool area are to be calculated. This makes it difficult to control and monitor their business outcome but it also causes difficulties in controlling the tool suppliers? outcome.

One purpose of our study was to investigate if equality in work time and parental leave in a relationship affect the time that parents spend with their children. Our first hypothesis was that increased equality in work time and parental leave leads to a reduction of the parents? total time with their children, ie the children spend more hours in pre-school and begin pre-school earlier. In order to test our hypothesis, we investigated the relationship between the woman?s and the man?s work time and parental leave and the time that the children spend in pre-school as well as at what age they began pre-school by using two surveys.Our study showed a significant coherence between both working women?s work time and the children?s time in pre-school as well as women?s parental leave and the children?s age at start in pre-school.