In the assembly process of airframe structures there are many drilled holes and on some parts the holes are mainly drilled manually with pneumatic handheld drilling machines. During conventional drilling in metal, burrs appear. To remove these burrs the parts of the structure must be separated and deburred before they can be put together for fastening. This is a time consuming measure and therefore expensive. To facilitate this process and lower production costs some parts of the process needs to be automated.A part of this thesis was a project in co-operation with Saab, Novator, Specma Automation and the University of Linköping.

An investigation of the heat impact of laser cutting on the material properties when producing tensile and impact test specimens of different steel types of varying thickness has been performed. The purpose of the thesis project was to provide recommendations regarding how much material that needs to be milled from the laser cut edge before tensile and impact tests. The study has been performed partly by investigating the test specimens by heat camera when the specimens were cut in the laser cutting line and partly by performing hardness tests, investigation by microscopy, and tolerance and roughness measurements and tensile tests of the laser cut material and material produced in the traditional multi operation machine. The results show that the heat affected zone in the thicker materials is greater than previously thought of, and that the currently used recommendation has to be adjusted. The study clearly shows that the thicker the material, the greater the heat affected zone, independently of the steel type, since the thicker material takes longer time to cut.

The present study examines in a longitudinal perspective earlyspeech development in children with partial isolated cleft palate comparedwith children with unilateral cleft lip and palate and children with typicaldevelopment. The groups were compared regarding consonant production at18 months, 3 and 5 years. The results showed that speech development inchildren with isolated cleft palate did not differ significantly from that inchildren with typical development except for production of oral fricatives at18 months. The children with unilateral cleft lip and palate had significantlymore speech deviations at all ages. The children in both cleft palate groupshad significantly higher hearing thresholds at all ages.

In speech and language intervention, the ability to interact is seldom evaluated; rather intervention is evaluated in terms of improved testresults.  If goal-setting in intervention also is based on everyday communicative needs, the relevance of the treatment may be increased and intervention outcome may be implemented in the patient?s natural environment.The present study, as part of a research-project, is based on analyses of interaction and interviews to examine everyday conversations and speech and language intervention. The aim was to explore if there is a relation between everyday communication needs and goal-setting in speech and language intervention for people with aphasia. A further aim was to investigate if there are everyday communicative needs that may form goals for speech and language intervention.Two individuals with aphasia and one individual with both dysarhtria and aphasia participated in the study. Three speech and language pathologists and two relatives also participated in the study.

The work covered in this report includes a literature study of the diesel dual fuel technology(hereinafter referred to as DDF). The literature study covers earlier work that has been doneregarding the use of compressed natural gas (CNG) and diesel in a DDF system. Moreover a onecylinder research diesel engine was fitted with a CNG fuel system for experimental testing. Theinstallation of the engine and the test cell is described. Results from the tests are presentedcovering emissions, heat release and pressure traces from the DDF-concept.During the literature study it was found that most research was related to heavy duty dieselengines.

This master of science thesis is focusing on how the fault handling on hardware connected toa control unit on a Scania vehicle is working. To the hardware counts buttons levers, sensorsand CAN. The work has been concentrated upon how the fault handling is working and if it ispossible to find any new fault modes.The control unit that has been studied is called the Coordinator and is the core in Scanias threenetworks of control units. The Coordinators work is to transmit messages between the threenetworks and to process signals from buttons, levers and sensors. The values is then usedinternally or is sent to other control units on the CAN networks.

A controlled recording in a studio is the basis of all voice treatment. However, this controlled way of recording voice patients' voices can be questioned. The voice use may be different in a natural environment. In children noise related voice problems are investigated in a study about voice and its development (BUG ? Child voice and noise).

Most often when developing a new system there is a need get a functioning testtool up and running. Including time, cost and resources the solution isn?t always obvious, developing your own or buy one ?of the shelf?. The purpose of this thesis is to study how a general testtool for executing functional tests should be designed to be reusable, be based on recognized knowledge and be able to fast and simple be customized for different types of systems. Key functions from the litterature is presented and used in the design of a testtool prototype.

In this paper, a navigation support approach for speech-only interaction based on auditory icons for room-based designs is presented, i.e. naturally occurring sounds that have a natural mapping to the system's underlying design metaphor. In contrast to many recent investigations that have focused on multi-modal or augmented reality systems, this paper concerns a unimodal speech and sound-only system. An auditory icon based prototype system for buildings maintenance support using a room-based metaphor was developed. The design was evaluated in a comparison with earcons and no-sound designs.

In this two years master?s thesis I examine the library?s representation of research and its influence upon the relationship between the library practice and the research practice. I also intend to find out what controls the representation and if it is possible to see changes in the representation over time. My source material has been texts published in the Swedish library journal ? and social domain ? Biblioteksbladet during the last decennium (2001?2011).

In the present study, the institutional discourse in health care was examined, focusing onspeech therapists and occupational therapists in interaction with a common patient withaphasia. The purpose of the present study was to identify common communication strategiesused in the professional conversation between a speech therapist and a patient and between anoccupational therapist and the same patient. Specific research questions were: Whatcommunicative strategies are used in interaction between a speech therapist and a patient withaphasia and between the occupational therapist and the same patient? Are theredifferences/similarities between how speech therapists and occupational therapists interactwith patients with aphasia?Six people in total, two patients in interaction with a speech therapist and an occupationaltherapist respectively, were recorded during treatment sessions of each profession. Generaland specific aspects of the institutional interaction were then analysed according to principlesof conversation analysis.Similarities in the use of closed questions as a strategy to increase the effectiveness ininteraction could be seen between the two different professions studied.

Background: Today when leisure time is spent, spontaneous sports activities decrease, due to a more comfortable way of living and physical capacity among non active adolescents decreases. There for it´s interesting to see how the physical capacity level has changed over time among young people participating in organized leisure time sports.Studies around the world show that young people standing outside organized sport activities have tended to decrease their physical activity levels over the last few decades. Less leisure time is spent doing physical activity and sometimes gets put into context with increased time spent behind the computer or inactivity.Design: A retrospective study of the test results on physical capacity between 1982 and 2009 for students applying to Växjö track and field high school. A total of 635 students (15 years old) have done 11 physical tests during the years. Five of these tests, with enough participants (at least 100) and documentation over at least 10 years, were used in this study.Results: This study shows that young track and field athletes have maintained the same physical capacity from 1982 to 2009.

Discourse Analysis of editorials from Danish and Pakistani newspapers related to 'Cartoon Controversy'. The study examines the intercultural dimensions of media ethics, focusing on the meaning of freedom of speech and CSR as it is perceived by the journalists in the respective contexts.

Calesco Foil AB is a manufacturer of thin flexible circuits for heating or electric conduction.The plant is located in Kolbäck, Sweden.One of the company?s products, the conducting polymer pasta is in present situationunpredictable. Unpredictable in the way that the same type of heater shows differentresistance, depending on which time they have been produced. The desired repetitivelyprocess is almost non-existing.The aim of this master thesis is to primary identify those parameters that effects theresistance, observe and if possible to perform tests on them. The results from this analysisstand as base for recommendations to achieve a repetitive and standardized printing process.The results and the observations from the tests indicate that a repetitive process is possible toachieve.

Public opinion has increasingly become a political force in the European integration process. At present, it appears that the people?s attitude towards the European integration is relatively skeptical. How can we expect that the attitude towards European integration will evolve in the future? This paper tests the extent to which diffusion theory can serve as a model to explain the development of attitudes to European integration policy in Sweden from 1999 until 2009.