This is a master degree thesis at Royal Institute of Technology (KTH) betweenÅngpanneföreningen and Programma. KTH is the examiner, Programma is the client andÅngpanneföreningen is mentor for this project.Programma has a product called TM1800 that has problems with EMC; the problem is thatthis product does only pass the CE-check with a small safety margin. This problem can besolved by reducing the radiation from the electric components in the product or by reducing offix base frame. In this degree thesis the focus is only on mechanical redesign.The main problems right now depends on the long distance between the screws, there is anisolating layer on most of the parts and the forces between the joints are too small. The mainfocus is to solve these three problems.The best solutions are when the whole base frame is more or less redesigned instead of onlyredesigning some of the connection points.

This MSc thesis is divided into two parts. The first part deals with the need for information from forest campartments selected for clear cutting, in connection with planning in an integrated forest- and sawmill enterprise. A review of literature is followed by a case stud y, where present conditions in a Swedish forest company are compared with current research in the area. The seeond part consists of a simulation stud y, which aims at camparing the accuracy of inventory estimates using different methods. The estimates are delivery forecasts, covering one month consumptian of timber in a large sawmill.

The primary purpose of this study has been to investigate the Swedish timber industry?s perception of compression wood. A secondary aim has been to describe particular areas within the production process where compression wood is likely to cause problems. This study has mainly been carried out as a questionnaire. In order to connect the findings to current research, additional information has also been collected by means of a literature review. The questionnaire has been intended for sawmills and wood-manufacturing companies from various production classes and owner categories, as well as from different parts of the country.

A common way to stabilize high rise buildings is to use an elevator core built of concrete. Today, we use to build these elevator cores of in-situ concrete. Precast concrete twin wall (double wall) is a semi-finished product that has become more common in recent years. This diploma work studies how the twin wall works out as structural elements in an elevator core. The work also shows some possible ways of designing twin walls and highlights some important parts of the design that will be vital to the stability of the building.    The result shows that it is important to think through where the element joints should be placed.

The purpose of this report is to investigate the business relationship between forest machine entrepreneurs and company officials within a timber area at one of the Swedish forest owner associations called Mellanskog. This report shows how these people work with their business relationships, what they believe are the keys getting a successful relationship and how they have got were there they are now. Key words: Business relationship, cooperation, team work, communication, negotiation, respect, commitment and trust..

De två byggvarugrossisterna Bengtsson & Gedelius AB och Timber Trading AB ska i januari 2006 bilda Elof Hansson Bygg-Gross AB. I samband med sammanslagningen skall även affärssystemen sammanfogas. Syftet med examensarbetet är att, med tonvikt på informationsflöden, undersöka, beskriva och jämföra träpaketshanteringen på Bengtsson & Gedelius AB och Timber Trading AB. Undersökningen har resulterat i förbättringsförslag som kan vara till hjälp vid sammanslagningen av de två företagen. Jämförelsen av teori och nuläge resulterade i ett idealfall vilket i sin tur synliggjorde förändringsbehoven.

This study is an analysis of a survey that harvester operators working for SCA Ångermanland Skogsförvaltning have been participating in. The purpose of this study is to try to show the harvester operators opinion about the forestry planning that SCA provides. Hopefully will this information lead to suggestion about what part of the forestry planning needs to be improved, if any is needed? Unfortunately only 30 / 60 questionnaire has been returned so no conclusion can be made, except about those who have answered the survey. The answers of the survey indicate a number of areas that needs to be improved. The marked routes needs to be more visible and the education about timber landings must be enhanced.

In order to understand the human impact on today?s remaining ?virgin? forest and to develop sensible management strategies for future reserves, it is necessary to know how these forests have developed. This knowledge can be gained by using forest history analysis. here are large areas of forests still untouched by modern forestry in the mountainous region in the county of Norrbotten. These forests are highly interesting study objects from an ecological and historical point of view.

The Swedish forest industry has put a lot of resources in the development of digital communications in hopes of improving collaboration with suppliers. The purpose of this study was to investigate whether VIDA would benefit from using digital communication with suppliers. The survey was conducted as a questionnaire study among the company?s staff and its suppliers. The result indicated needs and interests to use digital communications in both groups. Young suppliers and suppliers on a distance showed the most interest in using digital communication. In terms of using these digital communications, the staffs and suppliers were most interested in information regarding transaction and forestmanagement plans.

This report reflects an examination work performed for Getrag All Wheel Drive AB during the spring of 2005. Among the companies range of products there exists some concern regarding the amount of clamping force and friction on bolted joints caused by the assembly torque.The aim of this project has been to determine if there is a simple way in which to identify and then practically apply testing methods for clamping force and friction through utilization of existing testing equipment.Three separate methods of clamping force and friction determination have been tested in rear drive unit, RDU, at a 30 Nm assembly torque. A fourth and final method, screw elongation with ultrasound, has been used as reference. The methods are:?Torque-Tension test.?Screw elongation with micrometer.?Joint stiffness test.?Screw elongation with ultra sound for reference.The results from tests can be viewed in table below.MethodTorque-TensionMicrometerCs=318 kN/mm Assembled with torque wrenchMicrometerCs=318 kN/mm Assembled on lineUltra-soundCS=311 kN/mm Ultra- soundCS=318 kN/mm Joint stiffnessTheoreticalClamping force-21,8 kN17,6 kN17,3 kN17,6 kN17,1 kN17,3 kNFriction-0,110,1470,1530,1470,1520,149.

The purpose of this study is to assess the state of health of the individuals living in Löddeköpinge during the middle ages, whose remains were excavated by Chintio, H., 1975-80. The location is thought to have been a trading community that ceased to flourish towards the end of the Viking age. The main focus of the essay is to examine the occurrence of osteoarthritis (sv. artros), trauma, and analysis of stature, in order to understand population health during this time period. Osteoarthritis has never been researched in Löddeköpinge and the analysis showed that, of the 60 skeletons examined, 68,3% demonstrated some change in the skeletal joints, which is much higher than in the comparative material obtained from Lund and Sigtuna.

Detta examensarbete har gjorts på uppdrag av Skanska Teknik med handledning av Johan Sjödin. Arbetets syfte var att jämföra olika limträförband, utförda av antingen spikningsplåtar eller WT-T skruvar, och komma fram till den bästa lösningen med hänsyn till bärförmåga, kostnad och utförandetid. I ett projekt har de spikningsplåtar, som används vid limträförband, börjat rosta under extremt fuktiga förhållanden fastän spikningsplåtarna är rostfria enligt tillverkaren. En fördel med WT-T skruvar är att de är gömda inne i träet och på så sätt inte i direkt kontakt med den aggressiva miljön, men även skyddad mot brand. Andra fördelar med WT-T är att utförandetiden är kort och kostnaden är lägre än spikningsplåtsalternativet.

This report concerns the for Sweden foreign tree species hybrid larch, hybrid aspen and poplar, and focuses on the area Kalmar and Mönsterås municipalities. The report shows that there are not only advantages with these species. The larch, the most common of the alien tree species has the greatest problems due to that its timber is difficult to sell in the area but also the Larch´s poor pulp quality and is more likely to be damaged by wildlife than the spruce is. Hybrid Aspen is much easier to sell and is used like regular aspen for match wood and textile pulp. Its disadvantage is the high cost for plants and to prevent damage from wildlife.

The aim of this thesis was to investigate if the robotized welding method FSW (Friction Stir Welding) could be applied for joining a rotating structure in an aero engine at Volvo Aero Corporation. FSW is expected to introduce less defects than today?s welding methods and could therefore be suitable for critical aero components. The material is the nickel based alloy Inconel 718, however a material experimentation is outside the scope of this report.The main goal of this study is to verify if the ESAB ROSIO robot based FSW-system has a suitable work space to be able to weld the rotating structure, and if the welding tool has accessibility to the joints. The FSW-process needs a rigid fixture, and a number of fix-ture concepts are presented based on a proposed weld sequence.

In order to measure the quality of the logs, one can with help of Fast Fourier Transform technique get the signals resonance peaks. With help of these peaks you can see whether the quality of a tree is good or bad. This report contains the work of a where a program has been developed to be able to process a vibration created by an automatic hammer hitting on a log of wood. From the processed signal the program should be able to show both the raw wavesignal and the processed measured data from the resonance peaks. Beyond the raw wavesignal and resonance peaks the program should also be able to control the automatic hammer.