Holmen Skog has only five out of 70 wood buyers who are women, This report is seen as a step in the process towards gender balance in the company. This is a problem that is equal over the entire forest industry in Sweden. They all think that sexual equal workplaces are very important to remain competitive, see things from different perspectives and development of the company. The survey was done by sending out questionnaires to all women who work and have worked as a wood buyer at Holmen, and as many men of both categories. These four categories became a total of twenty persons. To map the industry another questionnaire was sent out to the six largest forest companies in Sweden. The survey found that female wood buyers not finished their work earlier than men did, as they thought before.

In Sweden there are about 4 million hectares of bare peat (mire). This land has great potential to be transformed into productive forest land, provided drainage is carried out and, in some cases, even fertilization with ashes. Drainage of mires is necessary because the high groundwater table prevents trees from growing due to reduced oxygen availability. Some of the key nutrients that trees need to grow appear in too small quantities in mires, especially potassium (K) and phosphorus (P). Ash from the combustion of biomass contains these elements and is therefore suitable as a fertilizer.

Bollsta sågverk ingår i SCA Timber och är ett furusågverk. Under 2006 producerades det 410 000 m3 sågade trävaror. Syftet och målet med arbetet är att kartlägga och på kort tid öka tillgängligheten för hela såganläggningen. Den ackumulerade målnivån på 77 m3/timme ska höjas till 82 m3/timme av sågad vara. Det finns en potential för hela anläggningen om ströläggaren förbättras.

Master thesis for Mechanical engineering, at the University of Lund. Incorporated in project Pondora.The purpose of this master thesis is to compare the existing one way packaging system with a proposed return crate system not yet available in Sweden. The comparison is focused on packaging handling in the grocery store.The purpose is also to investigate how operating return crate systems in Norway and Finland function, identify, the problems they have encountered and survey economic and technical aspects. The knowledge we hereby have acquired was subjectively evaluated in the thesis.The Swedish survey has a focus on meat and bread. The surveys in Finland and Norway contain all the products utilizing the studied return crate systems.We have surveyed how the handling of transport packages for meat & provision and bread is done in the store.

This is a literature review of how the climate change affects the forest growth innorthern Sweden. The temperature will rise about 5 °C with the largest increase in thewinter season (December - February) and the CO2level in the atmosphere is expected tobe doubled. Precipitation patterns will change and increase with 25-35 % and theprecipitation will be in form of rain rather than snow. Today the forests in northernSweden are entirely dominated by coniferous stands. This may shift with the climatechange and results in a larger number of deciduous trees, preferably birch will becomestronger and grow better and faster.

Cameraria ohridella, the chest-nut leaf miner, is a new pest in Sweden. These moths make leaf mines on chest-nut trees, preferably on Aesculus hippocastanum, which results in brown blotches on the foliage and early loss of leaves. Since the first observation in Macedonia in 1985 it has spread rapidly through Europe. The moth arrived in Sweden in 2003 when it was observed in Malmö and surrounding areas. In this paper a literature study describes the morphology and life cycle of the chest-nut leaf miner. Further more a test with pheromone traps examining the number of generations in Sweden is shown.

Hustillverkning är en process som ställer höga krav på kvalitetstänkande för att förhindra annars lätt uppkomna reklamationer. Sävsjö Trähus AB (STAB):s nisch är att anpassa huset så långt det är möjligt efter kundens önskemål. Detta komplicerar framtagningsprocessen av husen samt ökar risken för uppkomsten avreklamationer. Under 2006 hade STAB reklamationer motsvarande ca. 3,1 miljoner kronor.

In the forest sector, non-industrial private forest (NIPF) owners commonly interact with numerous stakeholders (e.g. forest managers, timber buyers, harvesting contractors and advisors) for counseling, planning, selling and hiring. Forest management is therefore built and influenced by the relationships between NIPF owners and other stakeholders. In the local context of a Southern Sweden, the Swedish Forest Agency (SFA) and the Southern Forest Owners Association (SÖDRA) are very influential stakeholders in small-scale forest management. Based on qualitative interviews and by means of grounded theory, an analysis of the relationships between NIPF owners and the mentioned organizations was carried out in order to understand the social context at the genesis of forest management decisions.

Housing construction very close to the lake Mälaren has become very popular today. One potential problem with these houses is the influence of the sea climate. Unprotected buildings are affected by strong winds and precipitation. So for that reason, it is very important to make an accurate climate investigation and use it for decision-making during the planning of the new settlement.It is very important with a good moisture protection regarding pelting rain, that is the combination of wind and rain. This is more important for buildings close to a lake, as this location normally means a higher exposure to wind.

Consumers today seek added value to the ordinary products/services that companies are offering. Consumers must get their emotional need satisfied - a need for experiences worth remembering. At the same time, the consumers are engaged in ethics and morals. Companies use events frequently as a marketing approach to meet the customer?s demand of added value.

Analyses of pollen and charcoal in peat cores, together with age-structure data of Pinus sylvestris from a Ledum-Pinus-mire in the Tyresta National Park (south-east Sweden) show the regional vegetation succession and fire history over the last 9000 years. Five major stages of mire development are identified: 1. Lake (c 7000-6400 cal BC); 2. Wet fen (c 6400-6000 cal BC); 3. Deciduous fen (c 6000 cal BC to c cal AD 700); 4.

During the past 20 years, the price of forest estates in Sweden has raised more than the price of timber. The purpose of this study is to investigate if it, despite this development, is possible to buy a forest estate based on economic grounds. Different forest parameters will also be studied to analyse their effect on the profitability. The study is done in cooperation with the company LRF Konsult. Purchase price of 34 forest estates near the coast of Norrbotten, Sweden, has been compared to yield valuation. For the valuation, guidelines from the Swedish author Lantmäteriet was used.

Title: Bottleneck management through materials administration Course:  4FE05EAuthors:  Mikael Karlsson and Johannes Mueller  Examiner: Helena ForslundKey words:  Bottleneck management, material management, process description, timber, proceduresPurpose:   The objective of this study is divided into three parts, all three parts of the purpose aim for the same goal. Namely, to improve the material management so that this enables the bottleneck in the planing mill to keep a continuous  flow, and thereby minimizing the risk for production stops at LB-Hus.  Part.  1:  Identify  and  analyze the material management  connected to  the planing mill  in order to identify problem areas.Part.2:  Identify  improvement potential  in the material management connected to the planing mill.  Part.3: Suggest improvements in the material management connected to the planing mill. Theoretical framework: Process mapping, inventory accounting, balance safety, inventory availability / service levels, safety stock and reorder point, forecasting and routine descriptions.Empirical foundation:  Interviews carried out at LB-House,  illustrated with the help of process maps and a description of each process.  Conclusions:  To work with  the  suggestions  given  and  to  follow  clear procedures  in  all  processes would  result in  a more  efficient  inventory management,  it would also present  a  solution  to  the problem regarding the planing mill being a bottle neck.Suggestions for further research: Review and map the information flow from demand to production start.

This thesis gives suggestions as to how to design a wooden-based wave-power buoy. The thesiswas carried out at Uppsala University in collaboration with the Division of Electricity and AppliedMechanical Engineering. The product was conceived and developed taking into consideration anumber of requirements put forward by the supervisor, Magnus Rahm. The most importantdemands were that the material used should be able to withstand pressure from the sea withoutbeing damaged and that the production costs should be low.Department of Engineering Sciences, Division of Electricity at Uppsala University was visitedseveral times to discuss issues including the various ideas with the supervisor Magnus Rahm, andwith several people in the department.The work started by studying available literature in order to get background information aboutsuitable methods available for the project and to see how similar projects were carried out. Thereason for this was to get a better understanding of this particular problem and how to solve it.After consulting the supervisor, the group decided to construct four different buoys using fourdifferent materials.

This thesis gives suggestions as to how to design a wooden-based wave-power buoy. The thesiswas carried out at Uppsala University in collaboration with the Division of Electricity and AppliedMechanical Engineering. The product was conceived and developed taking into consideration anumber of requirements put forward by the supervisor, Magnus Rahm. The most importantdemands were that the material used should be able to withstand pressure from the sea withoutbeing damaged and that the production costs should be low.Department of Engineering Sciences, Division of Electricity at Uppsala University was visitedseveral times to discuss issues including the various ideas with the supervisor Magnus Rahm, andwith several people in the department.The work started by studying available literature in order to get background information aboutsuitable methods available for the project and to see how similar projects were carried out. Thereason for this was to get a better understanding of this particular problem and how to solve it.After consulting the supervisor, the group decided to construct four different buoys using fourdifferent materials.