This thesis describes redesign and adaption of a products housing. In order to make it more economical to produce at a lower production volume. The thesis is based upon a prototype that a previous student developed for injection moulding. The goal is to find alternative manufacturing methods, but also to identify parameters that affect the cost of the injection moulding tool.The housing must be tough in order to protect the circuit board inside. But at the same time it must allow sound, light an electrical communication to pass through.

Data retrieved from airborne laser scanning represents a new source of forest data. Today, the technology has matured so that it can function in an operational environment. The aim of this study was to compile areas of application of laserdata in forestry. Moreover to analyze costs and accessibility of laserdata. The goal was to provide private forest owners information to support assessments of possible benefits of laserdata.

Under senare tid har det på den svenska livsmedelsmarknaden växt olika miljö- och kvalitetsmärkningar som grundar sig på olika kriterier. Vi har i denna uppsats valt att studera två av dessa: Svenskt Sigill coh SVENSKODLAT. Syftet med denna uppsats är därför att ur ett producentperspektiv, undersöka huruvida Svenskt Sigill och SVENSKODLAT certifieringarna kan utgöra en strategisk konkurrensfördel. Vi har identifierat tre aspekter som var och en i varierande grad kan sägas bidra till att de båda certifieringar vi studerat skapar konkurrensfördelar. Dessa tre aspekter vilka vi sammanfattat i en ABC-modell är: adding value, barrier to entry och cost saving.

Transfer pricing has attracted considerable interest among tax authorities in recent years. One of the reasons for this is that various countries have now begun to protect their own tax bases to a greater extent than they did in the past. Sweden has introduced a law on the documentation on the grounds that the tax office to review the pricing of transactions that occur within multinational corporations. The purpose of the law is that companies should apply a transfer pricing that meet arm's length principle, which means that internal pricing reflects market prices. The EU Commission has, together with the EU member states formed a Forum, the EU Joint Transfer Pricing Forum (JTPF), since cross-border trade within groups constitute a threat to the internal market. The Forum has drawn up a code of conduct which includes a model of documentation.

Andelen flerspråkiga barn i Sverige ökar och följdaktligen så även behovet av kunskap om deras språkutveckling. Flerspråkiga barns språkutveckling har visat sig skilja sig i viss mån från den hos enspråkiga barn och då normer för flerspråkiga barns språkutveckling saknas i logopedisk verksamhet idag finns en osäkerhet kring hur deras språkutveckling bör bedömas. Föreliggande studie ingår i det internationella forskningsnätverket COST Action IS0804 och ämnar utgöra ett litet bidrag till en växande databank om flerspråkiga barns språkutveckling, i detta fall i jämförelse med enspråkiga barns språkutveckling. Studien utgår från 100 narrativer berättade av sex- och sjuåriga enspråkiga svensktalande och flerspråkiga engelsk-svensktalande barn. Narrativerna eliciterades med hjälp av två bildsekvenser från bedömningsmaterialet MAIN och samlades in inom ramen för tre tidigare magisteruppsatser i logopedi från Uppsala universitet.

In Sweden, harvesting pre-commercial thinning (PCT) stems for energy purposes is a interesting way of financing the high cost of preparing dense stands for a profitable first conventional thinning. This concept can be labelled bioenergy thinning. The aim of this study was to quantify the productivity of a Vimek 404R light harvester with an accumulating Naarva-Grip cutting head during the bioenergy thinning of a self-regenerated stand west of Sunnansjö in Dalarna. The stand was birch-dominated, contained 15 371 stems/ha, and measured on average 4,6 cm Dbh and 7 m tall. Even though the driver was well experienced with the machine, the stand in question was the first one that he ever thinned in this manner. Nevertheless, the driver strived to accumulate as many stems as possible during each crane cycle and chose to cut taller stems in half so as to make the handling and forwarding of the harvested stems easier.

The purpose of this thesis is to examine how key performance indicators are being used as performance management tools within the production industry. Specifically the purpose is to investigate how the KPI:s within the telecommunications industry drives reusability regarding production test systems. This thesis will also highlight today?s cost models and suggest improvements of the KPI and what new ones could be introduced. A case study at Ericsson AB has been performed.

Arbetet visar praktiskt hur en organisation kan utnyttja kvalitetsbristkostnader, för att sedan utifrån dessa identifiera möjligheter till förbättring. I arbetet används identifierade kvalitetsbristkostnader för att ta fram en projektplan för motortillverkningen. Projektets resultat ska medföra att kvalitetsbristkostnaderna vid motortillverkningen minskas. Arbetet börjar med att identifiera vilka kvalitetsbristkostnader som motortillverkningen har dokumenterat. Därefter tas en enkät med öppna frågor fram, vilken behandlar kvalitetsbrister vid motortillverkningen.

A clean and affordable energy source for cooking is deficient in developing countries. People rely on fuels that contribute to environmental, social and health problems.Biogas is an alternative energy source and an increased investment in small-scale biogas production can in several developing countries be found. Several projects have started to use the technology in developing countries because of the benefits with biogas. Some cases in the establishment of biogas plants have succeeded and some have not. The study is a literature review supplemented by two field studies.

Executive SummaryThis final thesis has examined the effects of an increased centralization and better coord­in­ation of the distribution logistics at ABB in Västerås. The company is today strongly decent­ralized and there is a minimum of collaboration between the 20 business units. This is why the questions were raised; how could the business units coordinate outbound logistic activities and what effects would that provide. The obj­ect­ive of this final thesis is to provide basic data for a future decision-making which desc­r­ibe these effects.The report has mapped out the factors that are important to ABB in an evaluation of their logistic activities and how the outbound logistics work today. The four factors are cost efficiency, delivery service, environmental impact and logistics capability.

A clean and affordable energy source for cooking is deficient in developing countries. People rely on fuels that contribute to environmental, social and health problems.Biogas is an alternative energy source and an increased investment in small-scale biogas production can in several developing countries be found. Several projects have started to use the technology in developing countries because of the benefits with biogas. Some cases in the establishment of biogas plants have succeeded and some have not. The study is a literature review supplemented by two field studies.

The cost of forwarding corresponds to about one tenth of the forestry industries raw material cost. This gives a motive to do good follow-ups to get a good overview of the forwarding distance and, thus, enable improvements. Follow-ups are also justified by the possibility to make more accurate calculations of the harvesting costs, if better estimations of forwarding distance are achieved. Today (2009) Stora Enso has GPS and vehicle-computers in most of their forwarders. These are used mainly for the forwarder to follow the tracks of the harvester and for the planning leader to see how the forwarder has been driving within the stand.

This master?s degree project concerns the combination of a multi dwelling passive house with solar energy for the generation of electricity and domestic hot water (DHW). Different alternatives with either solar thermal systems or photovoltaic (PV) systems are compared with two reference alternatives producing DHW from electricity or district heating. The economical comparison uses a life cycle cost (LCC) perspective based on the present value of expenditures for investment, energy and annual operating and maintenance.The energy yields from the solar energy systems were calculated by hand and with simulation software. Calculation and dimensioning of PV systems were carried out with a software called PVSYST.

A clean and affordable energy source for cooking is deficient in developing countries. People rely on fuels that contribute to environmental, social and health problems.Biogas is an alternative energy source and an increased investment in small-scale biogas production can in several developing countries be found. Several projects have started to use the technology in developing countries because of the benefits with biogas. Some cases in the establishment of biogas plants have succeeded and some have not. The study is a literature review supplemented by two field studies.

Transportkostnaden för rundvirke utgör cirka 15-25 procent av den totala kostnaden för skogsindustrins virkesanskaffning. Trenden i skogsindustrin är att branschen går mot färre och större produktionsenheter, vilket ställer högre krav på en effektiv virkestransport. Detta innefattar hela kedjan från avlägg till processad ved vid industrin. För att kunna hålla ett högt kapacitetsutnyttjande på rundvirkesfordonen är det av största vikt att man minimerar väntetider samt har ett jämnt virkesflöde till industrin. Huvudsyftet med studien var att kvantifiera effekten av ändrade arbetstider och skiftformer för åkerier som levererade virke till Bravikens Pappersbruk och Sågverk under 2013 med avseende på kostnader för rundvirkestransporter.