Sweden have 419 000 km road in the country and about half of these roads is forestroads. The forest road net most important mission is to make it possible to deliver wood from the forest to the industries. With a raw material that is spread over a large area the road network is important. Each year has the forest road network been extended with about 1 700 km new roads. To decide if a new road is to be built different forest road cost estimation models has been used.

This study evaluates the retention of nitrogen and phosphorus in four newly constructed wetlands in the municipality of Falkenberg, Sweden. The four wetlands have been selected because they have been specifically constructed with the aim to reduce nitrogen and phosphorus in farming areas. The process of selecting the specific wetlands has been done in collaboration with the county administration in Halland. Through field studies in collaboration with the landowners where the wetlands are sited, the areas that provide the wetlands with water were determined. The size of these drainage areas were determined in a GIS computer program. The type of land use within the drainage areas was also determined.

The objective of this thesis has been to investigate the approval process for an image. This investigation has been carriedout at four catalog-producing companies and three companies working with repro or printing. The information wasgathered through interviews and surveys and later used for evaluation. The result of the evaluation has shown that allbusinesses are very good at technical aspects but also that the biggest problem they have is with the communication. Theconclusion is that businesses need a clear construction for the image process.

The project explores the possibilities of using additive manufacturing (3d-printing) to build architecture. Through a combination of theoretical research and practical experiments a building system has been developed which has the capabilities to create houses with great geometric flexibilities to a affordable price today. The construction system Perimeter is demonstrated in a pavilion situated at Norra Djurgården in Stockholm. .

Swedens membership in the European Union have resulted in an internationalcharacterized labour market. The construction sector is the area who employs mostposted workers among the 7400 employees who monthly enters the market. It?s alsothe sector where a big part of the work-related deaths occurs. The purpose of this studyis therefore to contribute to a greater understanding of the regulation regarding postedworkers, their work environment and the consequences of it.

AbstractIntense competition in the building industry has forced building companies to develop highly efficient and optimised building solutions. This project, with a loggia that works both as an extended living room and a glazed balcony offers a highly economic viable alternative to standard balconies. This alternative is likely to attract build master since the area of the loggia will be part of the apartment area, i.e. included in the area for rent..

AbstractConcrete foundation slabs are usually exposed to unilateral drying during the curing process. The unilateral drying causes an axial shrinkage and a concave curvature of the construction. The curvature results from the fact that the upper part of the slab is drying and shrinking faster than the lower part. This is called gradient shrinkage.A problem occurs when the slab is considered fully restrained by adjoining structural parts. The deformations caused by axial contraction due to the constant part of the shrinkage and the curvature caused by gradient shrinkage of the slab are then prevented by the fact that the slab is fully restrained.

The purpose of this report is to investigate and compare the difference between stand-thinning machines and strip-road thinning machines, and how they affect the stand on behalf of future growth, theoretical economic result, wind impact, snow pressure and density of stand. The investigation is regarding the first commercial thinning of pine stands, after pre-commercial thinning that was well conducted. The investigation area was located near Katrineholm, Sweden. The measurements that were measured were strength of thinning and amounts of wind throws, snow-breaks and hauling damages. The results that emerged, was that thinning with strip-road machines had a significantly higher strength of thinning over all, as compared with the stand- thinning machines (45 percent versus 30 percent). Comparisons between wind-throws, snow-breaks and hauling damages of the stand could not establish any significant differences between the two methods that were investigated. Conclusions, over all, were that if forest owners want to have more timber volume left for second thinning and final cut of the stand, the forest owners should choose the method with stand-thinning machines. From the point of view of gentle treatment of the stand and ground damages the choice should be the same. However, the method with strip-road thinning machines is the most common and accessible method in Sweden. Most likely it is the most economical way to manage the stand for forest owners in present time. If the method with stand-thinning machines is becoming more common in Sweden, it is suggested for forest owners to consider the stand-thinning method as a candidate for treatment due to economic aspects..

AbstractTitleOwnership apartments - The success that got lostDate of seminar2011-05-27Course/ProgramBachelor thesis/Construction and Real Estate Business ProgrammeAuthorsAnna ÅbergMarie Louise Homayon NejadMentorSven-Ola CarlssonExaminerGunnar WramsbyBackgroundThe 1st of May 2009 the government introduced a new accommodation form called ownership apartments. The government´s intensions were to give the individuals more influence in their housing, to increase the variety of accommodation and thereby create a freedom of choice when selecting their housing. They also saw opportunities to reduce segregation and increase the total production of houses and or apartments with this new type of ownership. The introduction was supposed to give the building companies a possibility to build with a new type of ownership and thereby create new and an increased number of projects for the future. This new accommodation form has however not gained the penetrating power that was expected.

Att lyckas som platschef i anläggningsbranschenEva Karlsmyr Bygg- och anläggningsnäringen brottas med lägre produktivitets­utveckling än andra industribranscher och utveckling av ledarskapet ses ofta som en väg framåt. Kunskap saknas dock om vad effektivt ledarskap i denna specifika kontext är. Denna studie avser bidra med sådan kunskap genom att i en tematisk analys med kvalitativ ansats studera ledarskap ur effektiva platschefers perspektiv i ett svenskt rikstäckande anläggnings­företag. Utifrån menings­koncent­rering av sju intervjuade plats­chefers berättelser har gemensamma aspekter av ledarskapet identi­fierats som respondenterna upplever avgörande för att lyckas i rollen. Studien har även undersökt hur dessa platschefer behöver påverkas av andra för att kunna utöva ett effektivt ledarskap.

The Swedish RE curriculum states that a major purpose and aim of education inreligion is to make the students accepting and understanding of people, regardlessof religious beliefs and conceptions of life. Previous research has shown that thereare tendencies indicating that these goals are not being attained thus Swedish adolescencespeak of religion and religious people in a stereotypical manner. Thesetendencies are causes of concern which is why this study seeks to make a contributionto the previous research. This research is required since there may havebeen a change in terms of results since the last study was made. In addition, resultsfrom research that are based on interviews are hard to generalize.

Partnering is a new and exciting way of cooperation in the Swedish construction industry. In countries like Denmark and the United Kingdom the concept has been developed during a number of years while the Swedish construction industry has been more reluctant.Partnering is seen by many as the solution to the problems that often occur in design and build contracts. Many others believe that it is a way for the big entrepreneurs to gain unfair advantage. Never the less the concept is fast getting more and more appreciation, especially in the region of Karlstad where many new buildings are built that way.We have focused on the new development of Carlstad Conference Center (CCC) which is currently built with a partnering concept. The main method that have been used in this thesis are interviews with personnel on different positions in the project.

In speech and language intervention, the ability to interact is seldom evaluated; rather intervention is evaluated in terms of improved testresults.  If goal-setting in intervention also is based on everyday communicative needs, the relevance of the treatment may be increased and intervention outcome may be implemented in the patient?s natural environment.The present study, as part of a research-project, is based on analyses of interaction and interviews to examine everyday conversations and speech and language intervention. The aim was to explore if there is a relation between everyday communication needs and goal-setting in speech and language intervention for people with aphasia. A further aim was to investigate if there are everyday communicative needs that may form goals for speech and language intervention.Two individuals with aphasia and one individual with both dysarhtria and aphasia participated in the study. Three speech and language pathologists and two relatives also participated in the study.

Ask any constructional worker and there is a high probability that this person knows a colleague with pain or other disorders caused by working with power tools.According to the Swedish Work Environment Authority 71 percent of the Swedish constructional workers is exposed to vibrations at least 25 percent of the working hours. Despite this, the number of reported occupational sicknesses caused by vibrations is as low as 1, 4 percent.JM Ltd. is one of the largest constructional companies in Sweden. Their main business is new housing and development of residential areas. God quality and low impact on the environment is a part of great importance in the company?s long-term goals.

Med anledning av JM:s satsning på Lean Construction, där företaget arbetar med att effektivisera verksamheten, syftar detta arbete till att identifiera frekvent försenade arbetsmoment och orsaker till detta. Arbetets datainsamling av olika typer av förseningar har avgränsats till nio tillhandahållna flerbostadsprojekt från olika delar av Sverige. Den data som har behandlats innefattar mötesprotokoll och tidsplaner som sedan låg till grund för de personliga intervjuer med arbetsledning för de olika projekten. Utifrån insamlad data och intervjuer genomfördes en enkätundersökning via Internet riktad till arbetschefer, platschefer och arbetsledare. Totalt blev 93 stycken personer från Stockholm och 95 från regioner inom affärsenheten Riks blev inbjudna att delta i undersökningen. Genom granskning av tillgängligt material kunde det konstateras att de arbetsmoment som vanligen upplever någon form av försening är:Arbeten under normalplanStällningsarbetenFasadarbetenHissmontagePlattsättningKöksleveranserVad beträffar arbeten under normalplan är brisfälliga geotekniska undersökningar en vanlig orsak till försening, vilket i sin tur kan leda till undermåliga bygghandlingar.  Andra vanliga orsakerna till att ovanstående moment blir försenade är framförallt bristande styrning av egen personal och underentreprenörer.