This thesis has been carried out in cooperation with a company which develops mobile sensor platforms. The sensors measure different types of data such as temperature, pressure etc.. They will communicate through the internet with a server that stores data in a database. This system will be controlled and monitored through a web page. The project's aim has been to develop this system and to implement a server, a database, a website and a client application that simulates sensor signals.

This Master Thesis has been carried out in cooperation with Ursus Medical AB (URSUS) which markets, assembles and sells the Rotex Screw Needle Biopsy Instrument ®. The instrument is delivered with an instrument holder. Customers had expressed dissatisfaction over that they needed to use two hands during a biopsy procedure, which resulted in a project to develop a new instrument holder.The project aim was to create concepts for how the new instrument holder should be designed, with focus on the mechanics. The new instrument holder would build on the existing basic principle that the screw needle and the cannula were screwed into the tissue. The thesis work would result in a technical solution and a functional prototype of the chosen concept.To achieve this, a generic product development processes were used and began with a comprehensive literature review.

In this thesis tests has been performed on the pull strength of screws glued into glulam beams.The experiment is based on the already approved method whereby the diameter of the drilled holes is the same as the screw outer diameter of 1 mm or bigger. The screws strength class shall not be less than 4.6 (EN ISO 898-1:1999, 1999).The difference in the experiments that were performed where that the drilled diameter were 1 mm smaller than the outer diameter of the screw so that the screw thread was worked into the wood.In the tests the gluing where made on M8 glulam beams. The screws where drilled at and angel of 90°tangental to the fiber direction with a diameter of 7 mm. The gluing of the screws where made in three different depths and where later exposed to pulling forces. The results showed both pulling breaks and screw breaks when they reached their maximum capacity.

Ever since ABB has begun diecasting their rotors instead of permanent mold casting it,variation in the quality of the cast has arisen. Diecasting is performed in three differentmachines, M1, M2, M3 with 400, 660 respectively 800 tons of die locking pressures.The aim of this thesis is to answer the following questions:What is the ?right? cast quality? How is the right quality achieved?For sizes 160-180 solutions will be proposed that consider eccentricity between thelaminate and the short circuit ring as well as elimination of the thin Al film that appearson the outer periphery of the rotors.Through considering the statistic material the most often diverging rotor type has beenidentified and one of the actual rotors has been sent to a laboratory to be analyzed inorder to establish the current defects. The result of the analysis shows that there areplenty of gas- and oxide-porosity.It has been proved that every time the dies temperature decreased below 120°C thecontent of gas porosity increased. It is due to rapid solidification of metal that flowsthrough the ?cold? laminate.It has confirmed that enhanced porosity in squirrel cage causes high impedance in therotors.

The report examines the factors which may be a contributing cause to the problems that are present when ferritic stainless steel are eddy current tested in a warm condition. The work is carried out at Fagersta Stainless AB in Fagersta which manufactures stainless steel wire. In the rolling mill there is an eddy current equipment for detection of surface defects on the wire. The ferritic stainless steels cause a noise when testing and this noise complicates the detection of defects.Because of this, a study was made of how the noise related to factors such as steel grade, temperature, size and velocity. By observing the signal and with the possibilities to change the equipment settings the capability to let a signal filter reduce the noise level were evaluated.

For over 40 years, there's been a debate in Sweden of whether it's good or bad with maintenance therapy for heroin addicts. This method is far more acknowledged in other parts of Europe and in USA. The aim of this paper was to explore how public actors manifest their thoughts concerning the subject of the substitution program in Sweden. This approach includes the complex of problems that can be found in statements and the discourses that these operators stand for and support. In my analysis the philosophical thread was principally based on Michael Foucault ideas, but also on other theories related to social constructionism.

In Italy in 1528 the famous author Baldassare Castiglione published the book Il Cortegiano. In words Castiglione portraits the ideal courtiers and provides a lot of advice on how to achieve the ultimate courtier manner. For example he introduces and explains the words sprezzatura and grazia. His advice spread from Italy and influenced the courts around Europe. My purpose with this study has been two folded. Firstly, I have analysed Castigliones Il Cortegiano in order to examine his vision of virtues and ideals.

The aim of this study is to examine metaphors and what may be perceived as motif-circuits in Stig Dagerman?s play Den dödsdömde (The Man Condemned to Death) and the two short stories ?Den dödsdömde? (The Man Condemned to Death) and ?Mannen från Milesia? (The Man from Milesia). My intention is to discuss a single theme and identity-marks that unites all three works, using Paul Ricoeur?s The Rule of Metaphor (La mêtaphore vive) as well as the ?thematic critique? of Jean-Pierre Richard.What is metaphor for Ricoeur is for Richard themes (theme): an organizing principle, a sort of schedule around which a world is constituted. Hence, I find similarities between the motif-circuits, Ricoeur?s metaphor-theory and Richards?s themes.

The aim of this study is to examine metaphors and what may be perceived as motif-circuits in Stig Dagerman?s play Den dödsdömde (The Man Condemned to Death) and the two short stories ?Den dödsdömde? (The Man Condemned to Death) and ?Mannen från Milesia? (The Man from Milesia). My intention is to discuss a single theme and identity-marks that unites all three works, using Paul Ricoeur?s The Rule of Metaphor (La mêtaphore vive) as well as the ?thematic critique? of Jean-Pierre Richard.What is metaphor for Ricoeur is for Richard themes (theme): an organizing principle, a sort of schedule around which a world is constituted. Hence, I find similarities between the motif-circuits, Ricoeur?s metaphor-theory and Richards?s themes.

?Life on a delicate thread?Baptism and godparenting in Bottnaryd and Ulricehamn 1781-1783The aim of this study is to discover if there were differences between the baptism traditions maintained in a typical rural parish and in an urban town parish in the period 1781-1783 and to suggest possible reasons for any differences found. Baptism records from rural Bottnaryd parish and the town of Ulricehamn were studied and compared. In both communities, parents were anxious to have their child christened on the day of birth or the day after. They did not want to wait until the following Sunday, as church law prescribed. Infant mortality was high and if the child died before it was christened, it would not go to heaven.

In Italy in 1528 the famous author Baldassare Castiglione published the book Il Cortegiano. In words Castiglione portraits the ideal courtiers and provides a lot of advice on how to achieve the ultimate courtier manner. For example he introduces and explains the words sprezzatura and grazia. His advice spread from Italy and influenced the courts around Europe. My purpose with this study has been two folded. Firstly, I have analysed Castigliones Il Cortegiano in order to examine his vision of virtues and ideals.

Purpose: The objective of this study is to illustrate how participants in leaderless based projects communicate with each other. Several studies have focused on technology-supported projects, such as open source projects, with an established project manager and goal. There is a lack, to the best of our knowledge, in studies that deal with the communication pattern in a leaderless computer supported collaborative project.Method: We have chosen to use a quantitative method where we systematically group several messages according to their content. This method was used in a similar study to illustrate the communication between participants involved in an open source project. We have taken the same Kripendorff based method and adapted it to our study by adding more descriptive variables.Theoretical perspectives: Manuel Castell discusses the aspects of a new communication power that is rooted in the individual as part of a larger creative audience.

SammanfattningKandidatuppsats i nationalekonomi, Ekonomihögskolan vid Växjö universitet.Nationalekonomi, NAC 346, Vårterminen 2006Författare: Christina Nilsson och Helena StareHandledare: Håkan Locking och Klas SandénTitel: Hur kommer det sig att de verkställande direktörerna har så hög lön? ? Ett empiriskt test av tre teorierBackgrund: Verkställande direktörers ersättning har länge gett upphov till debatter runt om i världen. Detta eftersom deras lön ökar allt mer och skapar en allt större klyfta till de övriga anställda. I Sverige år 2000 tjänade näringslivets toppchefer 46,4 gånger mer än industriarbetaren.Syfte: Att kontrollera om någon av de tre teorierna, neoklassiska teorin, turneringsteorin samt agentteorin, kan ge någon förklaring till varför löneersättning är så hög som den är. De vi undersökte i denna uppsats var följande hypoteser: Hypotes A: En verkställande direktörs ersättning varierar med 1) företagets storlek, 2) företagets prestation, 3) den verkställande direktörens ålder, 4) den verkställande direktörens utbildning, samt 5) den verkställande direktörens anställningslängd i företaget.

SammanfattningKandidatuppsats i nationalekonomi, Ekonomihögskolan vid Växjö universitet.Nationalekonomi, NAC 346, Vårterminen 2006Författare: Christina Nilsson och Helena StareHandledare: Håkan Locking och Klas SandénTitel: Hur kommer det sig att de verkställande direktörerna har så hög lön? ? Ett empiriskt test av tre teorierBackgrund: Verkställande direktörers ersättning har länge gett upphov till debatter runt om i världen. Detta eftersom deras lön ökar allt mer och skapar en allt större klyfta till de övriga anställda. I Sverige år 2000 tjänade näringslivets toppchefer 46,4 gånger mer än industriarbetaren.Syfte: Att kontrollera om någon av de tre teorierna, neoklassiska teorin, turneringsteorin samt agentteorin, kan ge någon förklaring till varför löneersättning är så hög som den är. De vi undersökte i denna uppsats var följande hypoteser: Hypotes A: En verkställande direktörs ersättning varierar med 1) företagets storlek, 2) företagets prestation, 3) den verkställande direktörens ålder, 4) den verkställande direktörens utbildning, samt 5) den verkställande direktörens anställningslängd i företaget.

Our employer Camatec Industriteknik AB gave us the assignments to increase theirs range of versions on Camcoil that is their own patent product. Camcoil is a capstan system that is used when steel band fabricated. Exist for example in production lines their steel band should be annealed. Our goal with this work is to come up with a completed production basis on a Camcoil for heavy industry. The basis should contain calculations, 3D-constructions, drawings and cost proposal on manufacturing and detail purchase.Demands on this project:1.