This master?s thesis is a remote sensing study of an area-based method used to detect forest in need of thinning by use of laser data and field samples. Only pine-dominated forest has been included in the study and height limits were set to match empirical restrictions. The study area was in the municipality of Älvsbyn (Latitude 65° 40´ N, Longitude 21° 00´ E), in northern Sweden.The Swedish authority Lantmäteriet is currently laser scanning most parts of Sweden, providing new opportunities and applications. The primary aim of the national laser scanning is to create a new elevation model, useful in consequence analysis of climate changes.

Delineation of recharge areas for aquifers is performed in the groundwater mapping process at the Swedish geological survey, SGU. This work is time consuming and performed manually. It is therefore desirable to develop a more general and repeatable method for defining recharge areas for aquifers.The purpose of this study was to investigate two other possible methods to delineate recharge areas for aquifers. The first method was to examine the possibility of using the topography of the bedrock to define the recharge areas for aquifers. To enable this, a method for generating the topography of the bedrock was developed.

Cuttings of Lonicera xylosteum L. were treated with willow extract to study the response in rooting capacity. The extracts were prepared by mixing chopped pieces of Salix x smithiana Willd. with water in a warring blender. The investigation comprised 2 types of salix extracts based on differences and dynamics between twigs in winter dormancy and twigs with new shoots. To explore the rooting response, three tests were made.

REINERTSEN AS performs expansion and buckling analyses of pipelines using ANSYS, afinite element modelling and analysis tool. In an expansion analysis the pipeline is modelledwith thin?walled pipe elements called PIPE20 which allows plastic deformation. However, ina recent analysis the results retrieved from the PIPE20 element were incorrect for strainsabout 1 percent. One main issue was that the PIPE20 element overestimated the strains.The purpose with this Master Thesis was to become familiar with the theories and analysismethods used in pipeline design.

Almost half of the population in Sweden suffers from obesity and the cases of eating disorders are increasing. We are exposed daily to the belief that losing weight will make us happier and it will just be through this particular diet. Even if it has been proven that short dieting plans like ?lose 20 pounds in one month? doesn?t give a long-term result, society continues to buy into the idea that they do.Every day 16000 placards are placed around us in Sweden with loud yellow colors and big black letters which make them almost impossible to avoid. Their main purpose is to attract and get as many people as possible to buy single copies.This essay deals with several questions: How diet tips figures on placards and how this has developed through years.

The governing set of regulations for structural engineering in Sweden used to be Boverket, BKR. However in the beginning of the 21st century a changeover to new regulations, the Eurocodes, started.The transition was completed in year 2011 when the Eurocodes became the mandatory design work policy for all countries within the European Union. The Eurocodes were implemented to simplify and remove potential barriers to trade that may exist when countries have different design rules.  Since the changeover it has been important for all construction companies to update their knowledge base and their design software.When comparing the two calculation processes they seem similar, but there are a couple of differences worth noting.  With the new regulations, engineers will find that the process when designing joints in timber structures has changed.  What used to be a fairly easy and straight forward calculation procedure has now become tedious and time consuming.The objective of this degree project is to present a product, a dimensioning tool that will help structural engineers when computing lateral load carrying joints in timber structures.The degree project is made up of two parts where the first part is the written report describing the background and theory behind load carrying computations. The second part of the project is the actual dimensioning tool which includes several worksheets in Microsoft Excel. The program treats single and double shear connections of the following:Nail jointsScrew jointsSteel plates (thick and thin types) The user can edit the following parameters:Type of plate/ number of shearsStrength class of timber membersMember and plate sizeType of fastenerDiameter of fastenerLength of fastenerYield moment of fastenerkmod and partial factors for design load carrying capacityThe dimensioning tool was created and developed in collaboration with structural engineers at the company Byggteknik AB.

Abstract This degree project examines how much carbon dioxide that emits during the construction phase of a road project. This is to make it possible to compare how the amount of carbon dioxide differentiates between traditional road construction and Swepave construction, which is PEAB?s alternative way to design roads. To make the comparison a calculation tool has been produced. To compare the amount of carbon dioxide emissions a reference project was needed.

This study was conducted in the "Kåtaberget" forest reserve in Västerbotten in the summer of 1999. In the summer of 1995, a prescribed burning was performed in the reserve. In some places where coarse dry woody debris (logs and stumps) was present, the fire consumed the wood, as well as parts of the humus layer, creating deep-burned patches. The low intensity ground fire also created dead woody debris by burning off living trees with open fire scars, as well as standing dead trees. In this study, the post-fire tree seedling establishment was examined, with special attention given to the former presence of woody debris. The study also includes a survey of the areal extent of deep-burned patches, as well as an examination of tree seedling establishment in these patches, compared to other burnt ground.

This M.Sc. thesis is a material application evaluation commissioned by the advanced body engineering department at SAAB Automobile AB. The purpose of the thesis is to evaluate implementation of the innovative sandwich design material Hybrix into an automobile body. Today the most commonly material used in the body is galvanized steel sheets and by shifting material to Hybrix several problematic issues have to be dealt with. Hybrix is an innovative sandwich sheet that inherits thin stainless steel face sheets and a stainless steel fibrous core.

Extensive planting of the tree species lodgepole pine (Pinus contorta var. latifolia) during the 1970s and 80s has resulted in large areas now being available for commercial thinning. However, the varying quality of the stands creates a problem. The purpose of this study was to investigate, at the Torsby district of the Stora Enso forest company, how well the present computer records of the stands correspond to reality and determine which stands are, from a qualitative perspective, suited for timber production. Finding variables that indicate better stands would give Stora Enso the possibility of selecting qualitative stands which are more profitable to thin. The study included 32 stands containing at least 70 % Pinus contorta.

Syftet med studien var att belysa och analysera förekomsten samt betydelsen av ytliga samtal för äldre. Syftet var också att undersöka vilken betydelse ytliga samtal kan ha i äldres vardag och om det kan bidra till att skapa sociala gemenskaper. Utifrån syftet har studien haft följande frågeställningar: Hur kan ytliga samtal beskrivas och vad förmedlas i dessa samtal? Vilken betydelse har platsen för att skapa ytliga samtal? Hur kan ytliga samtal och platsen tillsammans bidra till att skapa sociala gemenskaper för äldre? Studien har en kvalitativ ansats och den vetenskapsteoretiska utgångspunkten är kritisk realism. Det empiriska material är inhämtat på en kommunalt driven lunchrestaurang.

This report is the result of a master thesis at the Department of Mechanical Engineering, Division of Industrial and Economical Development, at Linköping University of Technology. The project was carried out on behalf of Fanerami AB, Mjölby and includes 20 weeks of full time schedule work.Cabinets with vertical mounted roller shutters all share the same problem, namely weight balancing. A roller shutter has an equilibrium area where the sum of the different forces acting on the shutter equals zero. As the shutter leaves that area it will pick up speed as it falls towards the bottom. When the shutter hits the bottom of the cabinet there is a potential risk of getting fingers caught and in this project a solution to prevent this from happening was to be presented.In this project, three concepts have been generated with the following different purposes:?In concept 1 the risk of getting any fingers caught when the shutter closes was to be eliminated in an efficient and inexpensive way.?In concept 2 the roller shutter had to be balanced at all time providing the possibility to keep the cabinet open in any position.?The last and most challenging task was to create a remote controlled TV cabinet.

Many wood living insects are considered threatened by modern forestry due to the reduction in amount of dead wood. During the last decade various methods have been used to enhance the quantity of dead wood in managed forests. However little is known how and if these methods are aiding saproxylic insects. The threatened tenebrionid beetle, Upis ceramboides, is already extinct in southern Sweden. It develops in white rotted dead birch (Betula spp) and requires sun-exposed sites.

Cellulose nanocrystals (CNC) are great candidates for composite materials. The reasons why CNCs are such attractive materials for them are due to their great mechanical properties, high aspect ratio and low density. On the other hand, hydroxyapatite (HAp) is a kind of calcium phosphate and a main component of bones and teeth. The purpose of the present study is to make oriented nano-sized composites with CNC and HAp. Although some researchers carried out to make CNC composites with HAp for biomedical materials, nano-sized and oriented ones haven?t been achieved yet.

SyfteSyftet med den här studien var att kartlägga det upplevda ät- och träningsbeteendet hos studenter på en hälsoinriktad högskoleutbildning. Ytterligare ett syfte var att få en större förståelse för hur olika ät- och träningsbeteenden inklusive tendenser till Ortorexi samvarierar med den självupplevda hälsan- Hur ser det upplevda ät- och träningsbeteende ut hos studenterna?- Vilka skillnader i ät- och träningsbeteende finns mellan årskurserna på den hälsoinriktade utbildningen?- Vilka samband finns mellan det fysiska och psykiska hälsotillståendet och ät- och träningsbeteendet?- Hur stor andel av studenterna har ett spänt förhållningssätt till kost och träning enligt Bratmans test?MetodDetta är en kvantitativ studie där enkätundersökning använts som datainsamlingsmetod. Ett riktat bekvämlighetsurval gjordes på målgruppspopulationen och urvalsgruppen kom att bestå av 100 stycken studenter från en hälsoinriktad högskoleutbildning. Enkäten utformades efter ett redan befintligt test, Bratmans Ortorexitest.