Älvkarleby, landscape character and design proposal is a Graduated Thesis (30 ECCcredtis), in the subject of landscape planning at the Swedish University of Agricultural Sciences, the Department of Rural and Urban Development. This thesis is a study and implement of the method "Landscape Character Assessment" (LCA), developed in England and Scotland as tool to analyse and highlight the landscape in different planning processes. The purpose of LCA is to increase the understanding and strengthen the role of the landscape. The thesis consists of three main parts: landscape characterization, guidelines and a design proposal. The landscape characterization emphasizes the values of the landscape in different types of planning processes, a documentation to base estimations on in any kind of change in the area. Theese estimations have resulted in guidelines that give proposals to the development of the landcape, focusing at the desingproposal.

AbstractThis report intends through a case study to investigate if lightweight concrete isappropriate as main material in the outer wall of a seven storey residential building.A technical design is carried out in accordance with the definitions and requirementsfor passive houses, given by FEBY?s1 ?Demand specification for passive houses?.A literature review is also carried out for a comparison between regular bolt wall andlight weight concrete wall, with a focus on the safety of moisture.The lightweight concrete block used in the report is as a celblock produced by thecompany H+H Sweden AB.The methods used have resulted in compliance with requirements andrecommendations from authorities. Calculations of energy, noise and moisture riskassessment has been carried out.The work has resulted in the conclusion that the lightweight concrete itself is notable to isolate in the extent necessary to obtain chosen U-value of 0,1 W/m2 ° C,without getting to thick. Therefore additional insulation is needed. There are fewrelevant reference objects built with only light weight concrete.

NCC has given us a commission to investigate a planned housing area in Haga, Karlstad, situated close to the traffic route Hagaleden and the railway. The housing area consists of one hundred apartments in five different houses. The houses are linked to each other by balconies with glass panels. A long carport is situated between Hagaleden and the housing area to absorb part of the noise from the road. The design of the housing area is creating a silent backyard.

AbstractThis report intends through a case study to investigate if lightweight concrete isappropriate as main material in the outer wall of a seven storey residential building.A technical design is carried out in accordance with the definitions and requirementsfor passive houses, given by FEBY?s1 ?Demand specification for passive houses?.A literature review is also carried out for a comparison between regular bolt wall andlight weight concrete wall, with a focus on the safety of moisture.The lightweight concrete block used in the report is as a celblock produced by thecompany H+H Sweden AB.The methods used have resulted in compliance with requirements andrecommendations from authorities. Calculations of energy, noise and moisture riskassessment has been carried out.The work has resulted in the conclusion that the lightweight concrete itself is notable to isolate in the extent necessary to obtain chosen U-value of 0,1 W/m2 ° C,without getting to thick. Therefore additional insulation is needed. There are fewrelevant reference objects built with only light weight concrete.

Hydropower is the largest renewable energy source available in today's society. Operation and production is handled by high-tech electronics. This thesis is done on behalf of Statkraft Sweden AB who wants to explore the possibility of replacing the hydraulic cylinder with an electric actuator, generally as well as a case of a small power station on the river Nissan. Whether it is the chaplain or francis turbine vanes are actuated by hydraulic cylinders. Because of Gustavsberg hydropower is inconstant operation, this report is based on power calculations, which are read and computed according to the available hydraulic diagram.

This master thesis encompasses an inventory of the older industrial community of Gimo. Investigations of the contamination situation for each industrial area were done. A risk classification according to the Swedish Environmental Protection Agency?s ?Method of Surveying Contaminated Sites?, phase one, followed. The risk classification was done on areas of Iron Work, a rockwool industry and a landfill. Gimo have had iron manufacturing from 1615 until 1945. Gimo have had two blast-furnaces and two smithies periodically.

The Swedish Welfare Act § 4 says that "Animals must be kept and cared for in a good environment for animals and in such a way that promotes their health and allow them to behave naturally." Pigs in the wild spend 80% of their waking hours walking around and rooting for food, eating and exploring their environment with its snout. Fattening pigs in commercial farms spend 80% lying doing nothing. A lactating sow is lying down most of her day, and only 10-20% of the body surface is in contact with the floor, so the pressure is high on these spots. Piglets lie down and paddle with their legs, with high liquid content in the tissues, several times an hour, to stimulate and massage the sow's udder. In the existing system, these individuals are held more often on floors that are anything but inviting to sleep on.

Hydropower is an important source of energy in Sweden and accounts for about 46 % of the total energy production. Sweden has about 1 200 hydropower plants and with the intention of raising the pressure head of the water and to store water, dams are built by the power plants. The storage reservoirs make it possible to adjust the energy production by demand and season. Dams in connection to the reservoirs are subjected to additional loading during periods of high floods or when an icecap in the winter is formed on the reservoirs. In order to maintain the dam safety, the power companies in Sweden are working with guidelines for dam safety from RIDAS.

Syftet med min undersökning var att få svar på hur Armémuseum i Stockholm representerar temat krig i basutställningen och hur museipersonalen förhåller sig till denna representation. Jag önskade även veta vad för sorts kulturarv Armémuseums anställda ansåg vara problematiskt att presentera.Jag intervjuade fyra personer från Armémuseum och via metoden ?thick description? och Aronssons flanörperspektiv som grundar sig i promenadetnografin, gjort utförliga anteckningar av mina observationer från deras basutställning. Studien grundar sig i ett musei- och kulturarvsvetenskapligt perspektiv, där studier om hur kulturarv presenteras på museer är ett vanligt ämne. Mina teoretiska grundpelare har bland annat varit Gregory Ashworth, Sharon MacDonald, Laurajane Smith, Rihannon Mason och Peter Aronsson som alla menar att synen och bearbetningen av mörkt kulturarv påverkas av politiska värderingar, tiden och hur det framställs på museer.Resultatet av studien kommer fram till att Armémuseums anställda vill förmedla att krig är hemskt och som ofta går hand i hand med lidande, död och orättvisor.

Österbyverken is an industrial estate in Östhammars municipality in Uppland, Sweden. Many different activities have taken place on the estate the last 600 years. During the last 15 years both health and environmental studies have been made by different companies. At the most recent study a great increase of metals in Nerån, a river that runs partly through and partly next to the estate, was identified with mass balances. The purpose of this thesis is to accomplish a deepened study about the reasons for the increase of metals in Nerån.

Lerbodaälven is a river in the municipality of Kil which, due to high phosphorus content is not meeting the requirements for good ecological status according to the Water Framework Directive. The purpose of this report is to investigate the causes for the high content of phosphorus that has been measured in Lerbodaälven between 1995-2010. Four questions will be answered in this report. 1. Does the sewage treatment work affect the phosphorus level in Lerbodaälven? The result from the time series analysis shows that the sewage treatment works have a small impact on the phosphorus level in Lerbodaälven.

The main purpose of this M. Sc. thesis is to increase the knowledge about managing urban forestry for recreational use. The analysis is focusing on differences between visitors? experiences in the north and south of Sweden, represented by Nydalasjön and by Härlanda tjärn.

This thesis was commissioned by Tekniska verken, Energy Division with the overall aim to investigate the concept of environmental debt and what it means for a business. Furthermore, a sustainable risk and responsibility investigation shall be carried out on the concerned areas. Finally, the priority areas shall be highlighted and proposed actions presented. The Swedish Environmental debt concept was presented in 1992 by Arne Jarnelöv. Environmental debt is defined as restoration costs for environmental damage. In the early days the concept did not take into account who was responsible, but the environmental debts was regarded as a humanity debt to future generations.

A distributed hydrological rainfall-runoff model has been developed using a GIS integrated with a dynamic programming module (PCRaster). The model has been developed within the framework of the EU-project TWINBAS at IVL Swedish Environmental Research Institute, and is intended for use in WATSHMAN ? a tool for watershed management developed at IVL. The model simulates runoff from a catchment based on daily mean values of temperature and precipitation. The GIS input data consist of maps with soil type, land-use, lakes, rivers and a digital elevation model.

There are many old dams in Sweden and, since few dams are constructed today, the main task in risk assessment on the existing dams is often to reduce the risk of failure. RIDAS (Swedish Guidelines on Dam Safety) is used when designing new dams and assess the existing ones. The guidelines include stability requirements for different failure modes, e.g. overturning and sliding, which imply that the load effect from e.g. uplift and ice load need to be less than the resisting loads or moments.