In this thesis an energy analysis of ethanol production at the ethanol plant of Lantmännen Agroetanol in Norrköping has been performed. The ethanol plant has been studied in combination with Händelöverket, the combined heat and power plant which provides the ethanol process with steam. The purpose of this study was to determine the energy consumption for the whole production chain from grain to ethanol. The analysis has included the energy consumption for cultivation of grain, production of chemicals, the production chain for wood chips, the steam production and the ethanol plant. The grain and wood chips are both considered raw materials there for the energy content in these are not included as energy input in the system.

To build high-rise buildings made of timber has for long been limited by national laws, due to the lack of knowledge in engineering solutions. Frame structures made of wood has for a long time been associated with major fire hazards and consequently lower safety and this connection is still being made today. The increased environmental awareness in recent years has contributed to the exploitation of indigenous building materials, including wood from our own Swedish forests and has become increasingly common. Increased knowledge about how structures behave in fire and how they can be protected in order to achieve safe timber structures has resulted in a growing interest in these structures in the construction industry. Research in the area is constantly updated and new laws allow any number of storeys in wooden buildings in Sweden as long as the performance requirements are fulfilled.The main part of this work has involved calculations of the fire resistance and load bearing capacity of floor and wall constructions.

The main goal with this thesis report was to come up with ideas of how to make the use of energy more effective and thus save money for the company.First a survey was made to find out where and how the energy consumers were divided within the company. The results were then used in calculations to find out how much money that could be saved and how long it would take to get back the investments.There is a big potential in saving money by recovering heat from the UV-lamps with a heat exchanger. It would also even out the pressure in the factory which is a source to heat loss and a cause for discomfort amongst the employees. It?s possible to save 105 000 kr in a year and the money needed for the investments is 600 000 kr.By using the recovery air more effectively the company could save up to 250 000 kr a year in lowered heat purchases, but this would require the use of automatic dampers.If you reschedule the running times for the wood chipper and invest in some kind of load management, for example Sydkraft?s ?Energidirigent? you can save at least 42 000 kr.

This masters thesis shows that the changes in the scientific publishing system have affected the academic libraries. Both technological change and the increased prices on scientific journals have forced academic libraries to take action. Some Swedish academic libraries have started publishing the university s own research material. The issue has in many cases been treated more as a library concern, than as a concern for the university as a whole. Neither has there been a national coordination of these matters in Sweden.

The Swedish society has trough decades developed into a multicultural society. Minority groups such as Sami have been a part of the country for a long time. By being separated from the majority through culture, language etc. minorities demand the right to become independent and have the ability to practice their culture. History show that minorities all over the world have been discriminated and abused by the majorities. Democratic procedures are often advantages for the majority.

Emissions of insufficiently treated wastewater, mainly blackwater (i.e. wastewater from toilets), contributes to the eutrophication of lakes and seas. At the same time, blackwater is a fraction with a low content of heavy metals and, after sanitization, it can recirculate plant nutrients to arable land using the liquid composting treatment method. Liquid composting means that organic material is degraded under aerobic conditions. For sanitization, the blackwater needs to be treated together with energy-rich complementary material.

The aim of this study is to provide a comprehensive overview of C?ronis beeswax varnish by Lefranc & Bourgeois; its contents, aging properties, solubility, and possible removal methods, with G?teborgs Konstmuseum?s ?Gothenburg Museum of Art? collection as the stud??s material? The purpose of the study is to provide a basis for decision-making regarding the treatment of works treated with C?ronis wax varnish. The study is based on contemporary conservation theory and interpretation-based decision-making and utilizes FTIR, microscopy, and solubility tests to examine the properties of the varnish. The study shows that C?ronis does not appear to be harmful to the treated works and has retained its solubility properties and transparency over time.

The efficiency of the harvesters work is more often reviewed, than the work of the forwarders. In a local Stora Enso office the differences between the harvesters reported volume of timber, and the actual volume delivered to the industry had been noticed. Therefore, the decision was made to do a review on the forwarders work. The review was conducted together with a worker from Vmf Qbera, who is working daily with wood measurement, in order to get a valid evaluation of the logs. Eight sites were included in the survey, and on each site 50 logs were marked. Approximately one third of the marked logs were pulpwood, and the remaining logs marked were timber.

The Sitting while waiting for sustainability project goal was to make a functional model for a resting chair and to make it by using furniture and artefacts as material. A try of understanding the process of re-design and to use it to design was driving the project through. The result was a prototype made out of a bed frame and 18 pair of jeans and with details made out of leather..

The last century, forest fires have decreased in frequency due to efficient fire-suppression along with the growth of the industrial forestry. Since 1990, fire has been reintroduced under controlled forms to recreate burnt habitats. Many species that are dependent on, or benefits from, forest fires have increased since fire was reintroduced. The importance of connectivity is often addressed in ecological research. This is particularly important for species dependent on short-lived habitats such as burnt forests.

Our purpose in this paper is to examine if there is any profitability for a company with a factory in the timber industry to invest in a combined heat and power, CHP. Based on analysis and the results that the paper generates, we will give Derome AB a suggestion on how it is a profitable investment or not to installing in a CHP.By investing in a CHP plant, you can get a high efficiency, which means that companies can use their resources more effectively. The Swedish wood industry has by-products of production that can be used for combustion in their boiler which is an advantage.The essay is a qualitative study where we have a case company, Derome AB. In this company, we interviewed two employees who have knowledge in the study. They have helped us to provide information and data about their business.We chose to use the pay-off- and the net present value method, NPV, to see if there are profitable advantages for the investment.

The aim of this study was to develop a simple model for calculating stock costs for bio fuel at Billerud Karlsborg and subsequently recommending a suitable stock level of bio fuel. The stock components considered in the model are GROT (branches and tops), bark, dry wood chips, raw wood chips from barking and sawdust. The calculations are based on a probability distribution of historical deviations between ordered and delivered volumes. The model presents two different ways to manage the supply in case of irregular deliveries. The first way is to stock enough volume to cover the deviations and the second way is to compensate with a quick purchase from the spot market (at extra high purchase prices).

When grains of wheat and rye are conventionally milled, large quantities of bran classified as by-products are left and are mainly used for animal feed. Bran is a complex material composed of the aleurone layer, nucellar epidermis, a seed coat, a fruit coat and a small proportion of the germ and endosperm depending on extraction rate. The bran fraction consists of approximately 40-50 % dietary fibre which can contribute to increase the nutritional quality of human cereal food. It would also be valuable for the food industry to convert by-products as bran to products with higher commercial values. The aim of this thesis was to analyse the content and composition of dietary fibre of heat treated wheat and rye bran according to the Uppsala method with some modifications in order to analyse soluble and insoluble dietary fibre separately. Half of the bran samples were precooked, dried and roasted and the other half dried and roasted (uncooked).

This study was conducted on behalf of SCA forest AB, Västerbottens forest administration. Timber procurement from non-industrial private forest owners has become an increasingly important part of SCA:s wood supply. The objectives of this study was to report the current forest conditions in the private forests in the county of Västerbotten, analyse the potential for procurement of wood from private forest owners, and provide a basis for decisions on future strategies for timber procurement from private owners.Material and data have been collected from different sources, mainly from Swedish National Forest Inventory and SKA-VB08. This material was the basis for the analysis and calculations performed with the Heureka application PlanWise. This study area was divided into six different analytical areas (Coastal south, Coastal middle, Lycksele, Inland south, Inland north, Skellefteå), where each area of analysis is represented by a number of municipalities.In this study, two scenarios were specified; one describing the current forest management with current harvesting levels and the effects of these assumptions, the second to illuminate what potential there is for future timber harvesting.

The driving forces from the forest owners point-of-view was studied on a market where several buyers attend to procure round-wood. It was concluded that forest owners prefer personal contacts to other means of communication, but that it is essential that the initial contact is a personal letter on paper. Furthermore, although price is always important, long standing relations is asked for. The buying companies need skillful experienced buyers that can provide more than just quick closures of deals..