This master thesis work was done by two students at Machine Design at KTH for Lesjöfors Stockholmsfjäder AB. The task was to develop a calculation program for gas springs. The program is going to ease the selection of gas springs for a given case of a lid that should be opened. The program is going to be used internal by sales people at Lesjöfors AB in Sweden and internationally. The program is therefore written in English.The program was developed in Microsoft Visual C# 2008 Express Edition.

The residential and service sector in Sweden accounts for approximately 38% of the total energy usage and Sweden has an aim to reduce the total energy use by 20% by 2020 compared to 2008, which means residential sector will have to improve energy efficiency. As part of that a law was instituted by the Swedish parliament that all properties must have an Energy Performance Certificate (EPC) to thereby give the property owners a greater insight into energy use in their buildings and propose recommendations for energy-efficiency measures. On the EPC, a value on the building's energy performance in terms of energy use in kWh / m2 per year is declared, of which electricity is a share of it. Instructions on what to include in the amount facility electricity for running the facilities is regulated by the authority for building, Boverket while SVEBY has made an interpretation of the regulations in their report "Brukarindata bostäder" where they have a table on what should be included in the amount and what not to include.This report is a study of two similar apartment buildings, where one of the buildings recently underwent renovation, to see if the declared amount of energy for electricity, in the EPC, is consistent with the measured value, and whether there has been any reduction in facility electricity in the renovated building after the renovation.The result shows that the measured value of the building electricity was 2.6 kWh / m2 per year, 28,8 %, lower than the declared value in the building that have not undergone a renovation. Calculation of values from previous years (2011) by the same percentage of facility electricity as in the results of the measurements, 56.7%, it becomes clear that the declared value for facility electricity in the EPC of the renovated building do not correspond with reality and that there has been an increase in use of facility electricity after the renovation..

With a shifting world market and periodically profitability issues, Swedish farmers seekalternative ways to enhance their profitability. One interesting alternative to get a highervalue and enhance products is biodiesel, a way to improve the profitability on a farmscale.The diesel that is produced and sold, already have a mixture of 5% biodiesel, andthere is a possibility to add more biodiesel to it. By developing new engines severalengine-manufacturers now allow a mixture up to 100% biodiesel in their engines. Hencethere is a market for an increased production of biodiesel. The aim of this study were toinvestigate the possibilities and the problems related to farm-scale production ofbiodiesel, and to study the profit margin in the production.

The E-department at GETRAG All Wheel Drive in Köping have problems with the efficiency on parts of their production equipment. The equipment with the most significant efficiency problems are four automated multifunctional production cells that produces housing for rear drive units. The major part of the problem is the large amount of small stops that causes the low efficiency.The department already worked with logging of interruptions and efficiency calculations before this project started. However this work was not done to the extent considered necessary for a systematic follow-up of the interruptions.The aim of this paper is to point out a more effective and systematic way to work with logging of interruptions and the follow-up. In addition the equipment were studied with a method for efficiency calculation that ? if used properly- is a more powerful and a visually better method than the one used by the company today.As the initial current state analysis of the equipment was made a lack of documented knowledge about the equipment was discovered.

Detta examensarbete har genomförts i samarbete med byggteknikavdelning på Ramböll Sverige AB, i Norrköping/Linköping. På företaget finns ett behov av att förenkla arbetet med vindlastberäkningar för hallbyggnader enligt Eurokoden. Idag använder företaget en förenklad metod som överdimensionerar. För att kunna göra en mer exakt beräkning helt enligt Eurokoden och effektivisera arbetet har det i detta examensarbete skapats en beräkningsmall för detta ändamål. Beräkningsmallen har tagits fram i programmet Microsoft Excel.För att också kunna se konsekvenserna av att jobba med en förenklad metod, har det utförts en jämförelsestudie mellan två befintliga projekt på företaget.

Syftet med studien var dels att undersöka hur momentet procent introduceras i matematikläromedel förelever i år 4-6, samt att undersöka karaktären av elevernas kunskaper i procentbegreppet efter avslutadkurs. Undersökningen inleddes med en litteraturstudie kring begreppet procent. Därefter gjordes entextanalys på aktuella läromedel för år 4-6 i Sundbybergskommun samt Bollnäs kommun.Undersökningen genomfördes sedan i år 6, en grupp om 40 elever. Eleverna följde en traditionellundervisning med lärarens genomgång som sedan följdes av individuellt arbete. Under arbetets gånggenomfördes tre diagnoser som avsåg att mäta elevernas begreppsförståelse i procent.

We have investigated the visual representation of men and women in Aftonbladet?s weight site. We have made a calculation of how many of the women and the men who were portrayed smiling/ not smiling, active/passive, looking into the camera/looking away from the camera and from which camera angle the picture is taken. We also kept statistic on the gender representation of the authors of the articles.Our investigation shows that Aftonbladet?s weight site has a distinct overrepresentation of women on their pictures, but also in terms of the authors of the articles.

Background: In the eighties the debate concerning the declining relevance of the traditional calculation started. The reason was that the method of calculating not had been changed despite that the costs and manufacturing had changed in many companies. This led to the development of activity-based costing. Management by means of activity information is called activity-based management, but there is no general accepted definition of what the term com- prises. Neither are there any studies which describe within which areas activity information is used as a base for decisions.

The latest thing in the area of environmental building today is energy-plus-house. The idea behind the energy-plus-house is to create a house that produces more energy than it consumes. To accomplish this, the house uses renewable energy, in this particular case solar energy. With the help from a proper construction and thoughtfully projected installations you can achieve a surplus of energy. The surplus energy can then be sold to the surrounding buildings and thereby conduce to a financial profit for the household.

The following article consists of two parts; one part is about house construction and the other is a specialization about radon. The house construction part describes how to project a house from start. It contains the conformation of the house, the installations needed, calculations considering the strength of the construction, energy calculation and what materials were chosen. Calculations considering the costs of building and operate the house has been carried out. The result showed that the house would cost approximately two million Swedish kroner to build and thirteen thousand kronor a year to operate.

The purpose with the work is to study Fortums activities with hydro power plants, dams and reservoirs mainly in a premise jurisdictional perspective and to show how GIS would be a helpful tool for the future.A great deal of the information that the Generation Hydro-division at Fortum are managing have a spatial element. That means that it is possible to spatially join this information to a geographical polygon, line or point. This information is today gathered from several different sources, such as files, paper maps and digital data of several kinds. A Geographic Information System (GIS), as and aid besides the ordinary tools should be an effective support in the everyday work with questions of a premise jurisdictional nature.The goal of this work is to account for how to organize, present and analyse geographic information. We will show how to link from the map to traditional tools such as calculation- and register programs.

Ocean Thermal Energy Conversion, OTEC, a technology using the temperature difference between cold deep seawater and warm surface water, can extract the work in the form of electricity. OTEC gives also synergies of drinkable fresh water. The temperature difference has an impact on the efficiency of the technology, which means that the feasibility of OTEC is geographically limited. The project intends to explore the possibility of replacing the atoll Tarawa?s present electricity generation with an OTEC plant and to explore synergies. In the present situation all of Tarawa?s electricity is generated by fossil fuels.

Ocean Thermal Energy Conversion, OTEC, a technology using the temperature difference between cold deep seawater and warm surface water, can extract the work in the form of electricity. OTEC gives also synergies of drinkable fresh water. The temperature difference has an impact on the efficiency of the technology, which means that the feasibility of OTEC is geographically limited. The project intends to explore the possibility of replacing the atoll Tarawa?s present electricity generation with an OTEC plant and to explore synergies. In the present situation all of Tarawa?s electricity is generated by fossil fuels.

Most of the beef production in Sweden has been integrated with milk production. Since the 1990:s, the number of dairy cows has decreased. A specialised beef production has developed in purpose to compensate for this decrease. The consumption of beef have increased in the last decade, but the Swedish production has no followed this trend. In 2004, the percentage of beef self-sufficiency in Sweden was 60 %.

The purpose of this paper is to give examples of different ways of economic planning and calculation within agriculcture. My aim is to use a couple of them as an explanation of a case from reality. My choice went to budgetsimulation and balanced scorecard since those are best suited in this specific case. In the information retrieval I present different instruments of economic planning like theory of cost, budget and productcalculation. The budgetsimulation describes how to use the different methods in a long term economic planning. The balanced scorecard is also a model of longand short-term planning but besides the economy planning it?s also a reminder of your personal goals. In the model I have used a dairyfarm as a case.