The thermal response of a borehole field is often described by non?dimensional response factors called gfunctions.The g?function was firstly generated as a numerical solution based on SBM (Superposition BoreholeModel). An analytical approach, the FLS (Finite Line Source), is also accepted for generating the g?function. In thiswork the potential to numerically produce g?functions is studied for circular borehole fields using the commercialsoftware COMSOL.

The aim of the present study was to evaluate the effects of large amounts of straw in the farrowing pen on thermal regulation of the newborn piglet in different weight classes. 20 sows were given 15 kg of straw in the farrowing pen 2 days prior to until 7 days after parturition. A control group of 18 sows had no straw in the pen. 6 litters from each treatment were observed. Measurements of piglet body temperature were made at 0h, 2h, 4h, 8h and 24h after parturition. At ?8h? the body temperature of the piglets in the Straw group were significantly higher (P=0,0149) than the piglets in the Control group.

Swedish farmers have the possibility to be subsidized by EU rural development programme for grazing animals on pastures to promote the biodiversity of flora and fauna. The environmental remedy sometimes does not allow supplementary feed and at the same time the Swedish Animal Welfare Act and the Swedish Agricultural Board?s regulations for animal welfare and protection states that animals, in this case horses, shall be fed with food of good quality and adapted for the species. The regulations also state that they should have an individual feeding regime that enables them to maintain a normal body condition. The aim with this master thesis has been to investigate if it is possible to keep Gotland ponies on extensive pastures, during late spring and summer and still maintain animal welfare. The horses were assessed every fourth week using a welfare assessment protocol developed in line with the Welfare Quality® project (submitted, Viksten et al) where physical, behavioural and resourcebased parameters were observed. Twelve one-year old stallions of the breed Gotland ponies purchased from different breeders were used in the study.

This diploma work on D-level is made in cooperation with Varnäsföretagen AB in Eskilstuna. The company performs contract manufactured aluminium goods. This work is a continuation on earlier diploma work in Varnäsföretagen AB. Even if the industry process consumes much energy for melting the aluminium goods, they consume a great amount of oil to warm up the building. The purpose of this work is to examine some places in the building and the process to see how much energy it is possible to recycles to the heating system and reduce the costs for heating.

Arlanda airport is Sweden?s largest airport. The demand for comfort cooling of the airport?s buildings is high and is mainly provided by district cooling. District cooling is based on the same principle as district heating.

The report aims to describe the austenitic stainless steel Sanicro 25 from a thermomechanical point of view. The thermal and mechanical properties of the material make it suitable for use in coal ? and thermal power plants. By the use of Sanicro 25 it would be possible to bring the efficiency of these plants up while bringing the carbon emissions down.A material model is created from material testing and validated through simulation in the finite element software Abaqus. The model that has been derived describes the material behavior during loading and stress relaxation for the first cycle in a thermomechanical fatigue test well.

The borehole heat exchangers of today suffer from poor thermal and hydrodynamic performance. The purpose of this thesis is to improve the performance of ground source heat pump systems and thermal energy storages by increasing the energy efficiency of the borehole heat exchangers. For this reason, the annular coaxial borehole heat exchanger (CBHE) has been analyzed. This type of heat exchanger is interesting in terms of both thermal and hydrodynamic performance. A model has been set up in the program Comsol Multiphysics in order to investigate the heat transfer characteristics along the borehole.

We have in this field study been researching how social comfort is affected by the work of social services and their collaboration with police, schools and health care within a small village located countryside in the northern part of Sweden. The attribute which sets this village a part from most other small countryside villages is the fact that the crime rate is amongst the lowest in Sweden as well as the social security feeling within the inhabitants are amongst the highest. We traveled 2298 kilometers back and forth to be able to interview professionals and gather empiric material for this study. The method we have used for data collection has been in the form of semi structured interviews. We have used previous research concerning collaboration, social comfort, social discomfort and fear of crime as our aid to analyze our findings with the help of theories regarding different types of communites (gemeinschaft and gesellschaft) invented by Ferdinand Tönnies (2001) and Human Service Organisation by Hasenfeld (1983).

To be able to handle tomorrows need for limited energy consumption we need to reduce our use of energy. The building sector stands for around 40 % of all energy consumption in the society. The government has put up a goal to reduce the energy consumption in our buildings with 20 % by year 2020 and 50 % by year 2050 compared with year 1995. To be able to do reach that goal we need a more energy efficient building stock.The main part of the energy used in our buildings is used for space heating. By installing ventilation systems with heat recovery on the exhaust air it is possible to use the heat-energy in the exhaust air to warm up the incoming air.

In this report the balconies? abutments for a property in Bo01-area in Malmö has been studied. The property which is called Vitruvius contains four build-ings where two of them have corbelling balconies with intermittent abutments. With intermittent abutment means that the 50 mm thermal bridge insulation that the balconies is equipped with, is broken regularly by a 300 mm concrete heel. The reinforcement bar that holds the balcony runs through this heel.

The aim of this study has been to, through a couple of chosen theories, examine in what way Japan as a nation can be said to have dealt with its dark past - concerning their crimes of war just before and during World War II. To do so, I have placed two chosen war crimes, namely the Nanjing Massacre and the matter of the Comfort Women, in the context of remembrance and commemorating of war, through different kinds of aspects. Those aspects are: the textbook conflict, official apologies, ruthless/unnecessary comments, and visits and commemorations at the Yasukuni shrine.I have found during this study that the nation of Japan has not been able to generate a broadly accepted dominant cultural memory of the war. Henceforth a couple of rival cultural memories are competing and becoming an issue of national division rather than national unity. I have come to the knowledge that there are both domestic and international political factors at play, resulting in this division..

Purpose: The purpose of this study is to seek understanding, describe and analyse how auditors practically reassure and maintain their independence towards clients.Methodology: The study is conducted with a qualitative method with a deductive approach. The study is based on interviews with both experienced and recently graduated auditors.Conclusion: Our empirical results show that there are economical incentives that contradict the requirements to fulfil the auditor?s independence. The conclusion is that the media view is narrow and biased. Furthermore the auditors agree that an acceptable level of comfort is achieved by offering a high value, being a part of a large network of professionals and the ability to set materiality and evaluate risks. .

The research work performed in this thesis has been carried out at the Production Tech-nology Centre where the Thermal Spray research group of University West has its work-shop and labs.This research work has been performed in collaboration with the International Advanced Research Centre for Powder Metallurgy and New Materials (ARCI), Hyderabad, India.First of all, I would like to express my sincere thanks and gratitude to my supervisors Dr. Nicolaie Markocsan and Dr. Nicholas Curry for their guidance, great support and valuable suggestions without which this work could not have been possible. I would also like to thanks Prof. Per Nylén for keeping faith in me and providing me an opportunity to work at PTC, which is a great place to perform research.

This thesis has been carried out on behalf of IV Produkt AB and intends to set an average ratio of thermal energy losses in apartment buildings that were built during the 1960-1990. This shall be derived by analyzing the total district energy consumption that has been divided into three parts: heat energy losses (the actual heating requirements), the heating of domestic hot water and heating energy consumption for the controlled ventilation.Three different residential areas that were built during the years 1962-1966 and one that was built in 1993 has been analyzed. All residential areas are located in Växjö urban and contains between four and six apartment buildings.The analyzed objects have a mechanical exhaust ventilation systems and district heating as the heating method. No own laboratory work or experiments have been done in this thesis, the calculations have been done on the basis of parameters from VEAB, interviews with property managers, and literature studies. By calculations, we have got a result that is reported in Chapter 6.

Norconsult AB has developed a solarhousing concept, a house designed for the warm climate in the Middle East andwith large quantities of solar panels installed. The cooling system for the house was designed in an earlier report, the purpose of this thesis is to investigate the possibility of short and long term storage of thermal energy via an underground energy storage volume.Two different designs of the storage and three different filling materials have been integrated into a model to simulate different cases. The first design consisted of pipes installed in the ground, without insulation. The second design consisted of an insulated concrete box installed to prevent thermal energy from the surrounding soil to flow towards the lower temperature regions within the storage. The three different filling materials were dry saudi sand, water saturated saudi sand and the filling material used by the client for energy storage in Sweden.The results from the simulations show that neither of the designs, regardless of the filling material, managed to extract enough thermal energy from the house to the ground to uphold the demands of indoor climate.