This master thesis consists of the creation of shock absorber models for percussive rock drills. A model of the rock was also developed. These models were connected to existing models of the rock drill to create a complete simulation of the rock drilling process.When the models had been created the rock model was evaluated by comparison with measured values from lab tests. The verified rock model was then used to evaluate the shock absorber models.Four new shock absorber concepts have been developed. Three of these have been modelled, while the fourth have only been sketched and described.The evaluation of the models showed the following:? Simulations of the single shock absorber don?t correlate to reality very well.

The purpose of this project was to design an adjustable gutter bracket for Lindab Profil AB. Lindab currently manufacture a gutter bracket that is adjustable in angle, however, this model has some drawbacks.  One of it´s shortcomings is that it is somewhat difficult for the customer to mount.  Another problem with Lindab?s current model is that the design makes manufacturing unnecessarily complex. The new gutter bracket, that we have constructed, does not have these problems. It is adjustable for different roof pitches.

The agriculture is today in a development that leads to bigger and bigger units in the primary production. To be able to follow this development many companies chooses to cooperate in different ways. The most radical change is when farmers fuses with other farmers and merge into to a big collectively owned operation firm. The reason behind this idea is that the firms achieve the big companies advantages by being complement to each other. The purpose of this essay is to make an economic analysis of two crop production companies who works together in an operation firm.

The purpose of our essay is to examine if variation exists in the way that auditors try their independence, this so called analysis-model. We will suggest some factors that influence the way auditors practise the analysis-model. The institutional theory predicts no differencies since the normative pressure could be expected to be severe. But we found that among other things people?s qualifications, personalities and audit firm?s size and age influence the way auditors try their independence.

Transportation represents 10-15 % of wood supply costs. It is therefore important to improve efficiency in the transport system to decrease these costs. The aim of this study is to map the timber vehicle routing processes used by a sample of timber hauling contractors and to identify possible links between the vehicle routing process and service and economic variables. The study was carried out at Södra Skog in autumn 2008. 15 timber hauling contractors were sampled and interviewed about their work with timber transports.

Companies acquiring ERP systems are often dissatisfied with the project and therefore consultancy firms wish to make use of project models in order to achieve success in implementations. Since research on ERP implementations in service companies is limited, there is a need for mapping of critical activities in implementation projects in this line of business. Under these premises, the purpose of our master thesis is to develop a model for implementation of ERP systems, specified in activities, which can be used by mid-sized consultancy firms with mid-sized qualified service companies as customers.A literature study including project models, modern models and methodologies for ERP implementation, commonly existent activities, success factors and system development methods was carried out. Starting out with this, a theoretical model for ERP implementation was generated. In excess of this, a case study was conducted, where the implementation of the ERP system Microsoft Dynamics AX at the service company Eurostep, performed by the consultancy firm Medius, was studied.

As IT service departments in organisations are becoming more complex and customised, the indirect costs are increasing in relation to the total costs. The difficulty of fully estimating and identifying the spread of the cost in the IT service department is increasing. As a result, firms tend to budget the business unit as a total cost rather than as a spread of defined costs. In order to deal with this challenge an ABC calculation will be applied. The Time Driven ABC model will be conducted in OMX´s Servicedesk unit within the IT services.

Since product placement is a relatively new phenomenon in Swedish television, there is a lack of research on what attitudes Swedish TV-viewers hold towards it. This is where our paper will contribute to the research. The purpose of this reserachpaper is to describe and analyze what attitude Swedish TV-viewers has towards product placement. Kim Schröders multidimensional model of mass media reception were used, which is a developed model from Stuart Hall?s ?encoding/decoding? one-dimensional model.

Today there is a widespread opinion that the woodmarket and the forest industry are dominated by a traditional way of thinking and not adapted to the customers of today; a lot of products are produced purely on routine. Also, there is a demand for improving the quality of sawn woodproducts. AB Karl Hedin wants to sort this out by increasingly adapt their products to the demands of the market, i.e. through introducing a short wallstud of standard length, "Hedinregeln". At tirst, the wallstud will be produced in lengths of 2,70 m and of guaranteed quality.

A new type of chartered holiday, fitness holiday, has evolved during the last years and has also been mentioned in different media channels. Despite this, fitness holiday is a relatively new and unexplored phenomenon, which caught our interest to further explore this. The desire to travel on a holiday of this type has also increased. Therefore, a study about this particular phenomenon with focus on the traveler?s motives behind the choice to go has been done.It?s a qualitative study and most part of the data has been collected during a field study to Playitas Resort, Canary Islands.

Due to the well-developed rhetoric and the relative easiness to estimate costs, cost considerations are usually more in-depth than revenue considerations when discussing strategies impact on profitability. To avoid dysfunctional companies and poorly judged strategy decisions it is necessary to develop the rhetoric of revenue considerations.By collecting data from 230 respondents in a quantitative study of two grocery stores in Mora, the study aimed to assess the relationship between choice of generic strategy and self-reported buying behavior, considering differing decision-making processes of customers.The results of the study indicate that a differentiation strategy performs better than a low-cost strategy in terms of buyer frequency, number of goods and cost of purchase. However, due to a poor data collection method, the results are weak, and should therefore be questioned. The study indicates that reliability considerations for behavioral measures should be treated in the same respect as psychological measures, and therefore illuminates the need for new methods and measures to be developed..

A new material model, for the FE-program ADINA, has been verified against twoexperiments. One unreinforced concrete beam and one reinforced concrete beam.The model, DF-concrete, has the possibility to estimate true concrete. However theresults indicate that in order to be sure that the estimations are true, there ought tobe data from the true concrete to verify against.Two FE-models have simulated the behavior of a ring-shaped part of the nuclearcontainment vessel. The results from the first, frictionless, model agree with similarsimulations and hand calculations for high pressures in the containment vessel. Thesimulations of the nuclear containment vessel show cracking in the concrete after10-11 bars of over pressurization.

Design for Six Sigma (DFSS) is a further development of the Six Sigma draft to carry through preventing quality measures in developing and designing of new products and processes. With increasing demands on enterprises development processes to be more safety and faster the need of DFSS arise as a product, process and service development concept in the organisations. Design for Six Sigma aims to improve and structure the development process of an organisation and consider the application of the innovation problem solving. The concept aims to leave the structure of the traditional Six Sigma concept and instead, from an innovative perspective, search for new solutions to existing problems. The concept constitute of a toolbox with a lot of quality tools that are divided into phases in a development model.

In this paper the possibilities to replace metal with plastic in products for the building industry were looked into. The first part was a market examination where several suitable products were found. After evaluation the door latch for in-house doors was selected to be re-designed to better suit the properties of plastic.New types of mechanisms were designed with different functions that use the benefits of plastic materials. Models of these mechanisms were developed to evaluate their function. The components in the different mechanisms were adapted for manufacturing with injection moulding.To confirm that the plastic material could handle the appearing stresses calculations on the most vulnerable parts were carried out.

Context: During the 21st century several alarming reports have been published that deals with the depletion and pollutant of the earth by human interference. The earth is an ending resource and so are the mountains and bedrocks which are continuously mined in order to harvest its minerals. The idea behind Urban Mining is to (re)invent processes enabling further purpose for materials both from old deposits and new products providing secondary raw materials and energy. This thesis aims to investigate the challenges and opportunities of how firms and organizations can and will be able to strike a better balance between product-/service systems, economic growth and environmental stewardship in the context of Urban Mining as an approach. With the innovation of processes, technology, business- planning and creation in focus.Objective: How to future proof a business model for Urban Mining by the usage of business model design.Method: This thesis will be conducted using a case study approach, meaning that it will incorporate qualitative, exploratory and descriptive characteristics - aiming towards enabling both applied and fundamental research.Results: The result evaluates the business model element differences between traditional C&D industry and Urban Mining industry.