In 2013 a new emission standard for heavy trucks was introduced and hence a number of new parts was brought in to Scania CV AB. This created a need for modifications in the silencers flow. The flow is highly complex involving several suppliers, call off methods and different models of silencers. The aim for this project was to improve the existing silencers flow. The flow, from supplier to assembling, has therefore been mapped.

This thesis has been made in cooperation with the forestry machinery producerEco-Log in Söderhamn. The focus of the thesis has been to find a cheaper wayto open the large engine hood of the company?s harvesters. The goal was tofind a solution that could increase the value for the customers by being saferand simpler to use, or, at the least, keep these values at an equal level comparedto the previous solution.In order to make it possible to CE-mark the new solution, it was importantMachinery Directive that came into effect from the beginning of 2010.To begin with, a specification of requirements was set up. Thereafter, anumber of different basic concepts was retrieved and evaluated.

Som en följd av Sveriges medlemskap i EU har offentliga upphandlingar kommit att få allt större betydelse eftersom de nu kan ske inom ett betydligt större geografiskt område än tidigare. En konsekvens av detta är att konkurrensen blivit allt hårdare och nya regler införs i takt med den snabba utvecklingen. Ett av resultaten av den hårda konkurrensen på upphandlingsmarknaden har visat sig vara att en del leverantörer lämnar anbud med onormalt låga priser för att vinna upphandlingskontraktet. Förekomsten av onormalt låga anbud i offentliga upphandlingar medför allvarliga negativa konsekvenser såsom att konkurrensen snedvrids, effektiviteten minskar och kostnaderna ökar. Detta påverkar både den upphandlande enheten, leverantören som bjudit onormalt lågt, de leverantörer som slagits ut samt konsumenterna.

Background: Long-term stress can lead to reduced health among nurses which can result in impaired quality of care. Stress in nurses' work needs to be studied in order to prevent stress and impaired quality of care. Aim: The aim of this study was to describe nurses' experience of occupational stress and factors that contribute to occupational stress. Method: The method used was a literature review. Results: The analysis resulted in five themes which describe nurses' experiences of occupational stress and factors that contribute to occupational stress.

Background: Sweden has, since 1983, had a statutory audit for all joint-stock companies. However, according to EG?s fourth corporation directive, member countries can decide on their own if this applies for small joint-stock companies. An investigation was launched in the fall of 2006 to form an opinion on the importance of the audit reporting by law and what an abolishment of this rule would mean for small joint-stock companies. Critics are claiming that the cost of audit for small companies is exceeding the cause in these micro companies.Audit is regulated by Swedish translation (RS) of International Standards on Auditing (ISA) and is to be applied in all companies comprised by the statutory audit.

The Working Hours Act regulates the working time conditions and together with the Working Time Directive of EU both acts aim to protect the workers. However, with The Swedish Model it is possible to diverge from the law-regulations by collective agreement by the parts of the Swedish labor market. The purpose of this thesis is to examine the national and international law regulations and further on study a few selected Swedish central collective agreements to discover in which extension deviation from the law occur. The sections of the Working Hours Act?s that has been investigated is ordinary working time, daily rest, weekly rest periods, breaks and maximum weekly working time.

This thesis describes how a cost reduction project was done on the Packsize ondemand packing machine EM7. The cost reduction was achieved by making minorredesigns of the EM7.The project began by studying the EM7´s structure and function by working on itsassembly line. A short literature study on the subject Design for Manufacturing wasalso done.By working on the assembly line and by speaking with staff from production anddevelopment departments, a number of ideas for reducing manufacturing costs arose.Estimations of the potential cost reduction size for each proposal were done incollaboration with vendors and the purchasing department. Based on the size of the cost reduction, technical risk, impact on the assembly lineand the development time the various proposals were ranked. The two highestranked proposals were selected for further development towards finished solutions.One of the ideas that were selected to develop in to a finished solution meant thatsome of the pneumatic valves were replaced with others.

During the 90s most companies organized and adopted routines for their environmental work. This work included for example eco-efficiency improvements and the introduction of environmental managing systems. At the UN conference in Rio in 1992 the concept Sustainable development was defined, but it was not until about the year of 2000 that companies in Sweden shifted their work from environmental management to sustainable management. A consequence of this is that they now have to focus on environmental aspect in conjunction with social and economic aspects.The purpose of this study is to gain understanding of what a change of focus to sustainable development means for companies. Has the environmental work suffered in the competition with social/economical aspects under the new sustainable focus? How will the new way of working affect the balance between environmental and social aspects? Changes were studied in five companies by analysing their annual-, environmental- and sustainability reports and through interviews of sustainable managers.

Sammanfattning I dagsl?get f?r h?llbarhetsinformation mer utrymme i f?retags h?llbarhetsrapportering ?n f?rut, men l?g j?mf?rbarhet f?rsv?rar investeringsbeslut. D?rf?r antog EU CSRD, vars syfte bland annat ?r att ?ka harmoniseringen av h?llbarhetsrapportering. N?r CSRD inf?rlivats fullt ut i EU- medlemsl?nderna kommer fler f?retag successivt bli skyldiga att f?lja direktivet. Syftet med denna studie ?r att beskriva svenska noterade bolags f?rberedelsearbete inf?r CSRD, samt vilka faktorer som ligger bakom de beslut som tagits och hur det p?verkar f?retagen.

Efter ett 10 årigt arbete mot att harmonisera direkt beskattning inom EU har Kommissionen lagt fram ett förslag till direktiv avseende en gemensam konsoliderad bolagsskattebas (CCCTB). Syftet med förslaget är att företag som bedriver gränsöverskridande verksamhet endast ska behöva följa en regeluppsättning samt arbeta gentemot en skattemyndighet. Tanken är att resultaten från alla koncernens bolag inom EU slås samman och sedan portioneras ut till koncernföretagen genom en fördelningsnyckel.Kommissionen har angivit att konsolideringen ska medföra att medlemsstaterna kan konkurrera på lika villkor och att fördelningen av skattebasen ska ske rättvist mellan medlemsstaterna. Det finns medlemsstater som är osäkra på förslagets konsekvenser och medlemsstaternas konkurrensmöjligheter efter förslagets antagande. Därav, är syftet med uppsatsen att utreda om fördelningsnyckeln i förslaget medför att skattebasen fördelas rättvist mellan medlemsstaterna genom att medlemsstaterna har möjlighet att konkurrera på lika villkor på den inre marknaden.Fördelningsnyckeln består av tre komponenter; arbetskraft, tillgångar och försäljning.

The flexibility of the labour market is considered as an instrument for increasing economic growth.Therefore has the use of flexible employment, also called atypical employment, increased. The atypical employment is characterized by insecurity in comparison with a traditional permanent full- time employment. One of the most common atypical employments is the manning employment, which is insecure whether it is permanent or not. The insecurity in the industry is based on insecure income, unpredictable working hours and poor psychosocial work environment.In order to encourage a continued increase of flexibility in the labour market while the need for security for staffing employees would be satisfied was Directive 2008:104 adopted. A certain amount of security has been achieved.

De senaste åren har utsläppsreglerna för sjöfarten blivit allt hårdare och under de kommande åren skärps de ännu mer. För att svaveldirektiven för sjöfarten ska fungera effektivt så krävs det också att de efterlevs. Syftet med den här studien var därför att undersöka hur länderna i Europeiska SECA områdena agerar och kommer att agera i framtiden för att se till att svaveldirektiven efterlevs. Studien syftar också till att undersöka hur efterlevnadskontroller genomförs, samt se om länderna har infört sanktioner mot överträdelser och vad dessa innebär. För att få svar på detta studerades lagar och förordningar, men framförallt skickades frågeformulär ut till de ansvariga myndigheterna i flera olika länder kring SECA områdena.

The problems around and the planning of wood flow is some of the most complex issues in the forest-sector. The experience and overview of the single employees is crucial for the possibility of correct tactical and economical decision-making. The increasing demand of savings and shorter reaction-times with greater flexibility in the wood-supply-chain, makes solutions and aids for improved effectiveness in the work and processes according to wood-flow urgent. Holmen Skog is starting to develop a new forest-road-management-system. The system will facilitate the work according to construction, improvements and updating the standard of roads.

Volvo Construction Equipment is one of the worlds largest manufacturer of heavymachinery. In Braås, Sweden, they develop and manufacture articulated haulers inseveral sizes. The biggest, the A40, is capable of loading almost 40 metric tonnes.These haulers have a bogie to distribute the forces of the load evenly onto the two axlesand there wheels. The bogie is constructed using a rigid balance beam on each side ofthe frame connecting the axles or an independent solution using hydropneumatics.An analysis has been made in order to establish the forces created during corneringand through the theory, an estimation of the extensive tyre wear and extra fuelconsumption has been made. All due to the effects of the tyres not being inline with thecornering radius.

Right now a major generational change is taking place within the banking sector. The new generation entering the labor market is often referred to as generation Y and it consists of individuals born between 1980 and 1995. Previous research has shown that the banking industry as a whole put a widespread emphasis on monetary incentives within the reward system. At the same time several studies highlight that individuals from generation Y are rather motivated by primarily non-monetary incentives.The aim of this dissertation is to explain how various monetary and non-monetary incentives affect the motivation of bank employees from generation Y. A positivistic research philosophy has been used with a deductive approach and a quantitative research method.This study indicates that bank employees from generation Y are motivated by retirement savings as well as a personal mentor or chief who draws attention to their development.