Den här rapporten avhandlar Kristin Charlie Torsdotters examensarbete i industriell design vid Högskolan på Gotland. Examensarbetet gick ut på att utforma foajén till det påbörjade bostadshuset SommarRo i Uppsala, samt en sittmöbel till foajén. Projektet genomfördes i samarbete med arkitekterna till bostadshuset, Arcum Arkitekter.Projektets tyngdpunk har legat på att utforma en sittmöbel till foajén. Kravet på möbeln var att den inte bara ska vara funktionell och tilltalande utan att den även ska fungera som en installation i rummet. Möbeln skall även binda samman foajén med den övriga byggnaden samtidigt som den ska ha ett tydligt samband med byggnadens överliggande tema: modern japansk design med inslag av skandinavisk samtida design.Arbetet har skett i enlighet med design metodikens olika faser.

The main purpose of this thesis has been to address the problem connected with conservation ofspecific objects in historic buildings that have a protected building status. The immaterial demandsand environmental concerns of a place of cultural significance are discussed as opposed to the welladaptedsetting of a museum, with regard to long-term preservation. In an authentic interior of acertain era, large-scale individual treatments of the objects that define it and regulations forconservation-related reasons, may not be considered a worth-while effort, as it is often the integrityof the environment as a whole that has been declared as significant. To investigate the relationshipbetween object and its context, a case study has been conducted by examination of the propertycalled ?Curmans villor?, located in the seaside community called Lysekil.

The idea with constructions made out of prefabricated elements is that it should be quick and easy to build as the demands for lower production costs, increased profitability and shorter production times are constantly increasing. High accuracy in measurements and well-balanced tolerances is required to achieve this. The fact that the concrete-elements doesn?t fit and that damage occurs during assembly is a highly topical issue even though we now have methods and systems that make this high-intensity construction possible. Through this report we want to highlight the problems that cause the dimensional and tolerance problems and give suggestions on how to come to terms with these.

Today, the requirements on doors and door sections in buildings are often many andtightly restricted. Especially in public buildings, the requirements for safety andfunctionality must cover the needs of larger groups of people. These strictrequirements have often led to doors and door sections in public buildings being verycomplex and difficult to correctly install without any complications.This diploma work has been carried out in cooperation with Werket Architects,which estimates a high percentage of flaws regarding aforementioned components, inprojects of the type described. The company therefore wanted to investigate howthey could develop their remit in door production, which is the projection and designof blueprints. By taking part of installers opinions on how they want the blueprints ofdoors and door - sections to be designed for the best installation possibilities,develop¬ment areas, and to some extent improvements regarding the company's useof accounting techniques, could be provided to the company.The study shows, among other things, that there is a possibility of development in thefunctional descriptions that entail the doors' fitting components.

I svalhallen vid SSAB i Luleå sker det en omfattande energiförlust till omgivningen då stora mängder nyproducerat stål svalnar. I detta examensarbete studeras möjligheten att ta till vara den energin för att producera el med hjälp av Organisk Rankine Cykel (ORC) teknik. En viktig förbehållning är att inte nuvarande stålproduktion på något sätt får hindras. I arbetet undersöktes svalhallens förutsättningar och möjliga hinder för installation av en ORC. Det gjordes även en litteraturstudie över olika värmeväxlingssätt som kan appliceras på svalnande stålämnen.

This thesis aims to contribute to improved functional procurement of photovoltaic systems, PV systems. Functional procurement means that criteria concerning a function are set rather than specifying technical details or products. Possible advantages and difficulties in using functional procurement have been analyzed by interviews, simulations and a case study. Electricity production and surplus production for different scenarios have been simulated via MATLAB. The MATLAB script was also used to generate rules of thumb on feasible solar fraction for six different load profiles; a church, a farm, a car mechanic, an office, an industry and an apartment building.

This master thesis work was done by two students at Machine Design at KTH for Lesjöfors Stockholmsfjäder AB. The task was to develop a calculation program for gas springs. The program is going to ease the selection of gas springs for a given case of a lid that should be opened. The program is going to be used internal by sales people at Lesjöfors AB in Sweden and internationally. The program is therefore written in English.The program was developed in Microsoft Visual C# 2008 Express Edition.

The assignment is issued by Scania Maintence AB seeking a new approach to detect power changes in their industrial processes. The work has taken place at Ångströmslaboratoriet and tests have been performed at Scania AB Södertälje.Today?s society consumes enormous amount of energy. In both economically and environmental view, it is important that the processes are effective, with high power factor. There are many ways to measure power in the industry, what they all have in common is that the installation is advanced, requires time and planning.

The construction process which is used today while constructing residential buildings has for along time remained unchanged. Unfortunately the development process has gone away frombecoming industrialized and instead most of the work is done at the construction site. In thisrespect this is a worse alternative because the project outcome will be more expensive and theconstruction time will be longer. Skanska?s vision is to have a process which is more like the oneused in small residential buildings which is fully industrialized.The constructing process for residential building involves more parties and therefore it becomesmore complicated.

Denna studie unders?ker en alternativ utformning av termisk brandgasventilation. Utformningen bygger p? att ers?tta tillufts?ppningar i markplan med r?kgasluckor i tak med hj?lp av brandteknisk installation i form av r?kgardin. Syftet med arbetet har varit att g?ra en j?mf?relse mellan denna hypotetiska utformning och traditionell brandgasventilation f?r att kunna utv?rdera om samma effekt kan uppn?s med de olika metoderna.

Detta arbete har två syften. Det ena syftet är att beskriva virkningens utveckling i Sverige från de först kända föremålen fram till 1900-talets början. Det andra syftet är att initiera forskning inom den textila tekniken virkning. Med utgångspunkt i dessa syften har jag arbetat utifrån följande problemformuleringar. När har tekniken virkning börjat användas och hur kan den ha uppstått? Hur har virkningen utvecklats? Vilka termer har använts för att beskriva tekniken? Hur har virkningen varit ansedd under den undersökta perioden? Min ansats har varit hermeneutisk och arbetet är utfört i form av en kvalitativ och deskriptiv litteraturstudie.

Arbetet behandlade vilka konsekvenser inom driften (ekonomiska kostnader och teknologi) som rederier kommer att drabbas av när IMO:s barlastkonvention träder i kraft då barlastvattnet måste renas innan inträde i Östersjön. Arbetets syfte var att få fram vilka konsekvenser det blir för rederier när IMO:s barlastkonvention träder i kraft. Resultatet skulle jämföra skillnaden mellan lag och rekommendation då Helsingforskonventionens rekommendationer baseras på IMO:s barlastkonventions krav. En kvalitativ metod valdes för att komma fram till resultatet, i form av en öppen intervjustudie, där fyra olika företag har intervjuats. Syftet med intervjuerna var att se ifall de följde Helsingforskonventionens rekommendationer och vilka konsekvenser det skulle innebära och skulle komma att krävas då Barlastkonventionen träder i kraft.

The competitive situation for businesses has experienced drastical changes as an effectof globalization and changes in consumer demands. Product related competitive advantages arerisking to quickly become presumptions for competition. The demand for increased innovationpace, along with the intense price competition, has led to buisnesses trying to find new ways todifferentiate themselves and Corporate Social Responsibility has became one way of doing so.The bad working conditions associated with the textile industry have rised a debate about thebusinesses? Corporate Social Responsibility. The future is heading towards more and morecompanies choosing to take their social responsibility, many of those experiencing this to be anadvandage in the relation with the consumers.

For a long period of time there have been discussions about the need to modernize, to keep up with the changes in our society. The schools as a result have to keep up and adapt in order for the education to be up-to-date. This includes the technological developments. Many steps have been taken and mighty sums have been invested in order to keep up the pace ? but are there any consequences from these kinds of investments? In this report I?m going to take a closer look on a recent addition to this phenomenon that were installed by means of a top-down approach and study the teachers and how they have adapted and view the change in their environment ? namely the newly installed interactive writing-boards.The questions I will study include how the teachers express their view about the installation of the interactive writing-boards.

Hemp has been used for textiles for a long time in history until it became illegal to grow in many countries in the 1930s. It is interesting from an environmental point of view because it doesn?t need any pesticides and in most locations it doesn?t need any irrigation either, compared to cotton, which normally requires big amounts of both pesticides and water for irrigation. Hemp is a bast fiber, which means that the fibers are located on the bast of the stem (on the outer layer of the stem). Therefore they cannot be spun directly, they have to be removed from the stem first.