The purpose of this study was to investigate the possibility of streamlining the test process by utilizing pair programming. During the process, pair programming has been practiced as is defined by the Extreme programming (XP) software development methodology, with the other aspects of XP discarded. The focus of the Testing itself has been toward unit Testing. The methods applied has been with an experimental approach where 93 cases were attempted to be solved by either single programmers or pair programmers. What has been investigated in these experiments was the time needed to complete a case, how many test attempts were needed to solve the case, and how high a percentage of the cases were solved.

The objective of this study was to assess validity and reliability for five different owner-completed instruments evaluated to assess chronic musculoskeletal pain in cats. All of the instruments were questionnaires, three asking about behavioral changes, one about the degree of pain and one about quality of life. One of the instruments was written originally in Swedish, the other four instruments were translated into Swedish before use. Data available were records from 57 cats with no signs of pain and 11 cats with different pain-related diagnoses. The diagnoses were ensured by clinical examination including palpation and manipulation of joints, gait Testing on a force-plate and X-ray scans. Instrument 1 was completed by 57 pain-free and 11 pain-affected cats.

The report examines the factors which may be a contributing cause to the problems that are present when ferritic stainless steel are eddy current tested in a warm condition. The work is carried out at Fagersta Stainless AB in Fagersta which manufactures stainless steel wire. In the rolling mill there is an eddy current equipment for detection of surface defects on the wire. The ferritic stainless steels cause a noise when Testing and this noise complicates the detection of defects.Because of this, a study was made of how the noise related to factors such as steel grade, temperature, size and velocity. By observing the signal and with the possibilities to change the equipment settings the capability to let a signal filter reduce the noise level were evaluated.

Automationscenter & Bråvalla Elteknik AB is a company that offers the market completed total solutions where the customer can operate and monitor their production from the terminal. In these total solutions they lack standard circuit which are developed by the company and which could manoeuvre/control/monitor controlled process objects. This report defines the work of developing the most common standard circuits.The report is initiated by a short theoretical part about PLC and the PLC system, with a connected terminal, which has been used. Thereafter, the turnout of the demands of specification is reported, after discussing with the supervisor in the course of the project. The report concludes with a disclosure of how the programming, the documentation and the Testing have proceeded and a final discussion concerning the project and proposals on continuation.The result is a CD with the documentation of standard circuits and how they are implemented in a new project.

Most often when developing a new system there is a need get a functioning testtool up and running. Including time, cost and resources the solution isn?t always obvious, developing your own or buy one ?of the shelf?. The purpose of this thesis is to study how a general testtool for executing functional tests should be designed to be reusable, be based on recognized knowledge and be able to fast and simple be customized for different types of systems. Key functions from the litterature is presented and used in the design of a testtool prototype.

Objective: The study will investigate whether cash liquidity have a negative affect on profitability and share value of companies, listed on Nasdaq OMX Stockholm 2008-2011. Part of the purpose is also to show if the industry risk is of importance for treasury management of these companies.Method: The methodology for the study is key analysis through hypothesis Testing and regression analysisConclusion: The liquidity ratio affects profitability in a negative direction on the entire sample. No other conclusion can be drawn..

Today the competition in the automobile industry is getting all tougher. The technology behind cars becomes more advanced. To get ahead of competitors car companies has to look into new areas of innovation.One important area is vehicle safety. Bigger companies have come so far in vehicle safety that difference between cars more depends on the car type (size) than the technology behind it.There is one area where vehicle safety that still has great opportunities for improvement, which is in active safety. The term active safety states that the car has the ability to identify treats and automatically respond to the treats.

In this project I have worked with creating a new kind of room in a hospital enviroment for children. The main purpose of the project has been to form a secure and positive experience for the patient while visiting a specific room at the department of childrens physiologi, at Drottning Silvias Children- and youth hospital in Gothenburg.The project was based on questions like how it is possible to move the focus from the unsecure and scary, to something secure and positive, when the patient is going through an Testing situation.The target gruop included a wide age span (0-16 years old), therefore I have worked with a theme, H2O, that works for diffrent ages. In the room, I have applicated the theme in different levels that is changeable depending on the age of the patient.During the project I have presented my ideas for the staff at the hospital. We have discussed their problems, what they wish in their working enviroment and how they experience the situation for the patients. I have also asked the patients how they experience the specific room today.The result of the project is a visual idea of how you can create a room, that you don?t exepect to find in a hospital..

Construction of an autonomous wind station was a project with the goal of creating a product that could collect wind data from a sensor and then transfer this data to a server wirelessly over the GSM network. The device would be powered by batteries and solar cells and function fully without requiring external power supply. This required that a small computer was constructed and programmed to store and send data at predetermined cycle times and programming of a server that received the sent data. The project also required optimization of power consumption and dimensioning of solar cells and batteries based on this. The construction of this station demanded research both for the selection of hardware and programming software. The computer was based on a microcontroller and a GSM module that sent the data over the 2G network.

In recent years, employees at large companies have started to demand that their employer should work more for good causes. The money the company wants to donate to charity is distributed mostly through a vote to decide where the money will be remitted. The purpose of this design case is to develop a design concept for a web-based donation service that involves all employees at a company. Furthermore, the authors of this study intends to explore how the motivation for employees of a company can be affected by participation in this service. In this design case, the service function, quality and concept was tested and evaluated.

Värmekollektor in Sunne is a company whose main occupation is to collect the gas produced inlandfills. The gas contains about 50 % of Methane which is a greenhouse gas 20 times worse than CO2and should therefore not be allowed to leak into the atmosphere. The Methane is in as large amount aspossible used in different plants for example heating of households. But there are occasions when aflare is needed to burn the excess gas at standstills or Testing of new landfills. The Flare only burns themethane to reduce the hazarder?s effect of the environment, it does not take advantage of the energy inthe gasThe goal of this master thesis was for me to create a foundation for an in-house production offlares for Värmekollektor.

This thesis is basically a design project aimed to find a safe and reliable automatic safety device, which is designed to be suitable for highly automated industrial situations. This device fits with ABB / Jokab Safety?s fence systems. These are built up around machines to create safety distances. The automatic protection device assist the operator in situations when loading or going in and out of the danger zone.

This is a thesis project in the field of information technology which begins by evaluating existing food price comparison systems and subsequently aims to design an improved, web based system for said purpose. The system features interfaces for price reporting, price comparisons as well as various search and review functions. The objective is to create a system able to compete with existing price comparison systems, which requires careful selection of products that can be found in all foodstores that also represent different households; a user-friendly price reporting and price comparison interface and an efficient tool for ensuring the validity of reported prices.The designed system features a more accurate formula for calculating average prices in events where the real price is missing; a more reliable security mechanism forv alidation of reported prices and a more comprehensible interface for viewing price reports, reporting prices, reviewing stores and products in comparison with existing systems. The system does, however, suffer from some optimization issues primarily in the form of inefficient database modeling; SQL queries and JavaScript code although Testing has shown that these shortcomings do not hamper overall performance to such a degree that usability is compromised. Further usability Testing performed on the system with five test subjects shows that a high level of overall user-friendliness has been achieved even though some special features, such as the detailed report containing price information per product for each store need to be improved.It is not possible to say at this time whether or not the designed system will be able to compete with existing ones or if the very concept of food price comparisons per se is viable in terms of profitability and marketability.

With gas prices persistently rising, electric and hybrid vehicles are getting more and more common and in recent years several new electric cars have evolved on the market. Although the energy consumption and low emissions are a huge benefit of the electric cars, they inevitably suffer from high prices, short range and time consuming recharging periods. To be able to withstand the competition it is important that electric vehicles not only can withstand general were and tare, but also the harsh conditions that ordinary cars is exposed to in daily usage. The purpose of this project is to develop a test methodology which replicate situations that could appear in daily usage of electric or hybrid cars and to understand the problems related to usage of electric cars in winter conditions. This paper also discusses the major differences between hybrid cars and electric cars.

This report contains a programming improvement work in a LabVIEW? fire Testing furnace control system for SP Fire Technology in Borås. Here materials and products behaviour are tested and evaluated, being exposed to fire. For this task, UGNET is being used for control and surveillance of the Testing furnace system. System hardware has been updated gradually through the years, while the software has been neglected.