When constructing a road the risk of emission of substances from the used materials to the surrounding environment has to be evaluated. The aim of this study is to present a proposal for how to evaluate the risk of contamination as a result of emission from the materials in a road construction. The study is based on literature studies, an inventory and a questionnaire that examines how experts in governmental agencies, industries and universities evaluate the risk of contamination. The inventory indicates that guidelines for evaluating the risk of emission from secondary materials in a road construction do not exist. The conclusions from the questionnaire are: that there is no common way to evaluate the risk of contamination as a result of emission from materials in the road construction, there is no uniform interpretation of the terms "minor" and "significant" risk of contamination and that the evaluation is subjective.

Examensarbetet behandlar en jämförelse av Server Message Block 3.0 och föregångaren 2.1 i ett befintligt nätverk. Jämförelsen utfördes i fyra laborationsmiljöer bestående av fyra operativsystem: Windows Server 2008 R2, Windows Server 2012, Windows 7 ochWindows 8. Sammanlagt har fyra tester utförts: Förstudie, Test 1, Test 2 och Test 3. Förstudien utfördes för att testa nätverksprestanda mellan två datorer. De andra testerna satte SMB 2.1 och SMB 3.0 på prov.I Test 1 ansågs SMB 3.0 prestera sämre än SMB 2.1, för att bekräfta resultaten kontaktades Jose Barreto på Microsoft.

This thesis for the Master of Science degree was performed at Solectron Corporation in Norrköping. The background for the thesis was a need to develop and build two test fixtures to automatize testing and adjusting of transmitter modules (TX-fixture) and receiver modules (RX-fixture) which are head devices in DWDM-systems. The basic elements for the test fixtures are: Test board, switch board and DC/DC board. The main function of the test board is to handle communication between the transmitter and receiver modules and supply voltage to these modules. The test board was insufficient and modified with a microprocessor to handle the communication between the PC and the receiver module.

The use of silicon carbide (SiC) as a base material in power electronics has manyadvantages, including high breakdown voltage and excellent temperature endurance.However, the packaging of such electronics presents major challenges and there is aneed for packaging that can operate in higher temperature. The purpose of this thesishas been to develop a test method and verify the functionality of SiC powertransistors prototypes with a new packaging technique developed by Swerea IVF AB.It includes setting up an electrical test-bed for power and high temperature cyclingand analysis of the results. Even though test confirmed functionality after thepackaging process, (at room temperature) the performance seemed to have been reduced. This could be a result of the measurement setup and the packaging process.In higher temperature the transistors failed to operate longer than a couple ofminutes which showed the weaknesses in the design and the challenges with this typeof packaging..

Today there are many system development projects that break both budget and time plan. Often this depends on defects in the information systems that could have been prevented. The cost of test can in some cases be as high as 50 % of the projects total cost and it's at the same time an important part of development. Test as such has moved its focus from the software it self and its faults to a wider perspective on whole infrastructures of information systems where assure a good quality is important. Sogeti in the Netherlands have developed a test method called TMap (Test Management approach) that can be used for structured testing of information systems.

Syfte: Syftet med den här studien var att undersöka repeterbarheten hos Schirmer I test samt att undersöka om det fanns något samband mellan Schirmer I test och enkäten TERTC-DEQ.Metod: 26 personer deltog i studien. Innan första mättillfället fyllde försökspersonerna i ett informerat samtycke och enkäten TERTC-DEQ. De undersöktes med hjälp av ett biomokroskop och deras ögon graderades med hjälp av Efron och CCLRU grading scales innan första mättillfället. Schirmer I test mättes vid tre tillfällen med en veckas mellanrum.Resultat: Resultatet av mätningarna visade att det var låg repeterbarhet hos Schirmer I test om man utför tre upprepade mätningar. Resultatet visade också en korrelation mellan testresultaten och enkäten TERTC-DEQ (r=-0,6184), det vill säga de försökspersonerna som hade ett högt resultat på Schirmer I test hade också en låg summa på enkäten TERTC-DEQ.

Today there are many system development projects that break both budget and time plan. Often this depends on defects in the information systems that could have been prevented. The cost of test can in some cases be as high as 50 % of the projects total cost and it's at the same time an important part of development. Test as such has moved its focus from the software it self and its faults to a wider perspective on whole infrastructures of information systems where assure a good quality is important. Sogeti in the Netherlands have developed a test method called TMap (Test Management approach) that can be used for structured testing of information systems.

The thesis aims to compare differentpiping materials in heating systems interms of cost as well as to illustratethe impact of energy characteristics ofdifferent materials over its servicelife. The methods used for costcalculations regarding piping are alsoto be examined to highlight thedifferences between template basedcalculations and more carefully executedones. The work is delimited to discusspipes of steel, copper, plastics andcomposites. The aim is that the resultcan be compiled to illustrate the prosand cons of various materials whenevaluating investments.The main object of the survey is part ofa heating system in the office-block KVSommaren located in southern Stockholm.The configured piping system is designedwith the mentioned piping materials andis used to make up the data for flow andcost calculations. The differentmaterials are calculated in both aconventional manner with a supplementarycost for additional fittings and with amore accurate quantification of thecomponents.

The aim of this work is to develop new conceptual designs for the fairings that are situated between the fin and the rear fuselage on the new version of the JAS 39 Gripen aircraft, called the Gripen E/F. The designs presented should show a profit in the form of lower weight. To achieve weight loss, the possibilities of using other construction materials other than those which are available at Saab today were studied. Therefore, a material survey was carried out in which the market for modern construction materials was studied to get an idea of today?s level of technology.

This is a paper about the effects from smoldering fire on lithic objects from an archaeological view. The introduction gives the background to this paper, a short orientation to forest wildfires and why the work is limited to: flint, quartz, quartzite and slate. Material and methods describes the stone materials and the setup that was used in the temperature logged tests with three replications for each type of material. The fuel in the burnings was peat on a bottom of sand. Flint showed a more drastic effect from heat compared with the other materials. Slate seems to have greater tendencies to change to darker colour and luster at lower temperatures than the other materials.

AimThe aim of the present study was to evaluate physical performance according to ?fysprofilen? in skiers of the Swedish mogul ski team and to compare their physical performance at three test occasions during one year.MethodsAll eight elite mogul skiers at the Swedish national mogul ski team during the seasons 2011/2012 and 2012/2013 participated voluntarily in this study. The test battery ?fysprofilen? was performed at three test occasions, October 2011, May 2012 and October 2012. Muscle strength was evaluated with squats, bench press and grip strength; power was evaluated with power clean, squat jump, countermovement jump with and without arm swing, Harre´s test and the 30 meters sprint.

Small scale internal consumer tests provide a company with a cheap way to get valuable information regarding their products advantages and flaws. Therefore the demand for possibilities to do this kind of test has increased. This report is part of a new sensory project at Unilever. It presents a method for sensory comparison of the company?s own products with the corresponding competitor products.

The occurrence of small amounts of albumin in urine, microalbuminuria (MA), is used both in human- and veterinary medicine as an indicator for patients who have developing proteinuria. Proteinuria can be prerenal, renal or postrenal which is important to establish during an investigation. With conventional methods decreased renal function is not detected until 70 % of renal function is lost. The ability to detect and start a treatment earlier might reverse or slow the progression of disease. The purpose of this study was to investigate the reliability of Heska® E.R.D.-Health Screen?, a test for microalbuminuria in dogs, to detect albuminuria.

Testing has always been an important task in the scope of software quality. Though it has never been as much appreciated within the management of the organisations as the software development has. However testing is becoming more attractive within organisations because it becomes more evident how much money working systems saves in contrast to defect ones. A tester often use testing tools to simplify the work progress. There are a lot of tools nowadays but not many evaluating models which helps the tester to know which one to recommend.

A speech-based material that early can assess a child's hearing is needed to provide an indication of a hearing impaired child's language development. Being able to identify and discriminate between different sounds is a requirement for interpreting speech. Hearing assessments that examine speech perception can therefore, unlike, for example, pure tone audiometry, examine a hearing impaired child's perceptual language skills and provide a basis for intervention.The purpose of this work is to evaluate a new auditory material on 3-year-old children. The auditory material is based on the Ling-6-sounds and the main question was which of the sounds in the test were adequate for test of discrimination. Furthermore, it was investigated how the test works with children aged 3:0?3:11 years and how age and gender affect the result.Twenty-four children aged 3:0?3:11 years were tested using a computer based test.