At the Division of Electricity at UppsalaUniversitythere are ongoing researches, including a research concerning turbo generators.Turbo generators produce a large share of electricity in the world; however they are costly mainly due to the fact that the cooling and ventilation that are needed to eliminate the excess heat from the generators are expensive. Turbo generators work with high efficiency and in this project, the main task is to simulate a generator while taking into account that the generator must be designed against self-oscillation, centrifugal force, exhaustion and heat. The turbo generator must be simulated without being too expensive and complicated.In this project, the dimensions of the turbo generator depend on the efficiency of it, and where the losses are in the generator. Furthermore, the optimum values need to be chosen with the help of the ACE simulation program. The report begins with an introduction describing the project followed by a task description that is dealing with the project.

The study is based on a new approach on how Swedish healthcare is supposed to be controlled and organized. There is a renowned administration problem within Swedish healthcare, which seems to be an obstacle to exploit the resources to the fullest. The latest venture within the healthcare system is patient involvement, where the patients become co-producers of their own care, which aims to both improve and make healthcare more efficient. A few wards in Sweden have implemented this new approach whereupon the study intends to discuss the effectiveness and efficiency in some of these.The study is restricted to three wards, whereof two of these are inpatient wards and the other one is an outpatient ward, within the medical clinic in Jönköping County Council, which has implemented the patient involvement approach in their daily work. The methodology for this study is qualitative in its nature where a time study of personnel time allocation and supplementary interviews with managing nurses on the wards have been conducted.

To meet the needs and demands of the costumer, accurate information about how much is available in stock is necessary. When the information in the system does not match the physical inventory, inventory inaccuracy occurs. Inventory inaccuracy is common among companies and may contribute to increased labor cost, excess inventory, production disruptions, waste of time, late deliveries, poor service and lost customers.The purpose of this study is to identify contributing factors to inventory inaccuracy for business with outdoor storage. The study also aims to investigate how efficiency factors can reduce the inventory inaccuracy for business with outdoor storage.A case study was conducted to answer the purpose. A company in the steel industry was chosen to examine inventory inaccuracy on business with outdoor storage.

Increased competition in the IT industry has sparked a need for developing faster innovation processes with more predictable output. One of the biggest issues when it comes to achieving a faster flow through the innovation process lies in managing its high degree of variation. Proposing a solution to this problem, Lean Software Development (LSD), was developed to provide a framework for how IT companies should organize its software development process to achieve increased speed and quality. This study examines to which extent LSD, as a set of values, principles, methods and tools, can be used to improve flow efficiency in the innovation process. A case study of a multinational IT company was made by conducting ten semi-structured interviews with current employees.

Today, there are no regulations saying that cows must have access to some kind of shelter at pasture during the summer. In more tropical countries, it is well-known that dairy cows might suffer from heat stress when exposed to sun and high temperatures. The well-being of the cows is thereby reduced and the production may also decrease. In Sweden, no research has been done in the area and therefore it is now a clear need of improved knowledge.The purpose of this study was to investigate the importance of shade for dairy cows in Sweden. The behaviour of 30 cows was examined to see any differences between cows with access to shade and cows without access to shade.

I am a practising classical soprano. After more than 20 years of professional singing, I re-trained my voice according to principles of the old Italian school of singing. In this essay, I examine the origins and priciples of bel canto, with special focus on appoggio and chiaroscuro, two key ingredients in the bel cantao tradition. I explore the relationship between science and the craft of singing, and what modern voice science has to say about the efficiency and health aspects of this technique, I also describe the profound effect it has had on me as an artist..

I transportbranschen finns behov av ett gemensamt och standardiserat mått för mätning av effektivitet och trots avancerade IT-system och moderna verktyg råder det idag avsaknad av detta. Transportföretagen behöver inte bara ta fram egna, interna mått utan också accepterade och vedertagna mått som kan användas för att kommunicera med kunder, myndigheter och andra externa intressenter..

In this report you can get a complete instruction about how to build your own development system for the PIC-processor. This card will be used for laborations for the students at LITH-ITN. With this card you can send new assembler codes (new instructions) down to the microprocessor via the Serialport on your computer. Then the new instructions for the microprocessor will start to execute. We made a solder paste stencil at Campus Norrköping solder paste stencil laboratory.

Through the growing use and availability of information technology the dependency of Internet is today increasing. Internet makes ways for a more mobile business communication that cost less. One of the latest applications of Internet technology are intranet and extranet. I have asked myself the question how intranet and extranet can affect companies efficiency and competitive advantage. In order to answer this question I performed a case study at Ericsson and ABB.

In this study, the effects of using fine milled cassava stems as an additive in biofuel pellet production was compared to the effects of refined starch addition. The bulk biomass fuel raw material, to which the additive was added, was a blend of spruce and pine sawdust. An experimental design in the factors cassava/starch content, moisture content and material temperature was used. Measured responses were pellet bulk density, pellet durability, amount of fines, pelletizer motor current, pellet temperature, die temperature and CV for pelletizer motor current (a measure of process stability). Each response was modeled by multiple linear regression (MLR).

The aim of this paper is to investigate to what degree the groups in our inquiry work independently. It is a qualitative research, which points to a well?functioning unit, that by definition is not self-governing, but has many traits of self- government. We have reached to the conclusion, that complete self?government does not have to be the best solution, if you want both quality and efficiency.

Safe retrieval of nutrients from human excreta to fertilize crops in order to gain adequate yields will increase food security and sustainability in agriculture areas with nutrient-poor fields. Safe and nutritious food will meet the dietary needs of the individual which promotes public health and the ability of an active life. Human excreta should be considered as a resource instead of being assumed as waste. Human faeces and urine is excellent fertilizers which may close the nutrient loop if utilized properly. However, sanitation of the excreta is required to prevent disease transmission by reducing the content of gastrointestinal pathogens such as bacteria, viruses and parasites. The objective of this study was to in small scale evaluate the sanitation in a combined liquid compost and urea treatment by monitor the inactivation of bacteria and viruses at the combination three start temperatures, 45, 40 and 35 °C, and three additions of urea, 0.5, 0.75 and 1 % and reference, 0 % urea addition.

The use of thin and attractive models to promote companies' products is widespread among marketers. This is true even for companies whose products have little or no association with beauty or body weight. As the proportion of overweight people continues to grow in many developed countries the ideals used by marketers to attract customers strays further away from the actual attributes of the customers themselves. What is little understood is what effect overweight has on the efficiency of the product promoter. Some limited research has studied how the efficiency of the product promoters in printed advertisements is affected by the existence of congruence between the product promoter and the product itself.

A number of studies in human medicine has documented positive effects of whole body vibration treatment in humans. The Vitafloor system, witch is based on treatment of horses with vibration, has the purpose to be used in training of healthy horses and as rehabilitation for horses with injuries in their musculosceletal system. The purpose of this study was to analyse what happens with a clinically healthy horse during treatment with Vitafloor. The methods used is mainly thermography before and after treatment, but also blood samples, measurement of rectal temperature, heart rate, clinical examination and observation of psychic reactions has been done. Statistic significant changes in skin temperature in hoofs and fetlocks of front legs has been observed after treatment with Vitafloor. Analyzing of the blood samples showed a tendency for decrease in Kalium, and two of the horses had changes in CK. No negative effect has been observed with the treatment of horses with Vitafloor, and the horses seems to like the treatment. .

Arvika Fjärrvärme AB, a district heating company from Arvika, today cover 74 % of their total energy production with biofuel wich runs a 16 MW bioler giving process water at saturated liquid state.In recent years Vaporel AB has introduced a new tecnique that gives an external generation of steam after boilers. The concept is built on an adiabatic pressure drop of the saturated liquid in a so called Flashbox which makes a small part of the liquid to evaporate. The generated steam is lead into a turbine where electricity is in a conventional manner.The purpose with this rapport was to do a basic study for the specific system at Arvika where it?s possible to see the potential production of electricity that follows an installation of a flasbox.The final goal was to introduce an economic analysis of a flashox installation at given conditions.To reach our goals we have created a model in Excel where we used the given conditions at Arvika Fjärrvärme to do our calculations. The model has been tested at three different states, of process water returning to potboiler, to be able to decide the optimal operation for the system at present.The studies have resulted in a pressure of the processwater at 14,5 bar (at) and a pressuredrop to 9,5 bar (at) in the flashbox.