During the last years, the pharmacy market undergone major changes. Re-regulation that has been done in 2009 meant that monopoly was unlocked for competition. In a market where firms offer equivalent products, increases the importance of delivery service as competitive tool to differentiate themselves among the crowd. This also applies to pharmacy market where the supplies of goods in large way consist of equivalent products regardless of the company.This case study observes the importance of delivery service in terms of competitive tool on pharmacy market by focusing on a company?s improvement in delivery service.

The Master Thesis has been carried out in cooperation with Silva Sweden AB and the objective was to develop a new product concept within the product category for everyday exercise. The purpose of the thesis was to use and analyze methods and tools which aid creativity and concept creation in order to make method recommendations for future projects.During the thesis a number of customer needs were identified, which in turn were translated into 20 concepts. On a concept decision meeting a pedometer-based concept was chosen for development. The new pedometer is in addition to counting steps also able to measure and calculate the user?s total climbed height during a day and present this graphically in comparison to famous monuments or distances.

The study investigates questions and considerations emerging when stone in historic buildings needs to be replaced. The focus is on the surface treatment of stone in sandstone façades in pre-industrial buildings. That means buildings constructed by traditional methods and craftsmanship without the use of modern technology.The research issue originates from the extensive stonework that is planned for the façades of the Stockholm Palace. The project includes the replacement of large quantities of damaged stone to newly cut stone. This raises the questions about the use of modern and rational methods for surface treatment on the replacement stone.

Som tandhygienist är det mycket intressant att studera karies-epidemiologiska undersökningar på både nationell och internationell nivå. Syftet med denna litteraturstudie är att beskriva och jämföra kariesstatus (DMFT) hos 12-åringar i Sverige och Irak, och några av de faktorer som kan påverka DMFT komponenternas roll och inverkan. För att besvara syftet användes information från litteratur och tidskrifter samt WHO:s databas om länderna. Resultatet visar att DMFT för 12-åringar i Irak var 1.7 (2003) och i Sverige 1.0 (2005). DT-komponenten, d.v.s. obehandlad karies, var hög hos irakiska barn medan FT- komponenten var hög för danska barn (inga data tillgängliga för Sverige).

During Spring semester 2011, Linda Engstrom and Malin Heder performed ?Golden Ratio?, a thesis which included 22.5 hp. The thesis followed the syllabus for the Degree Project for degree of Bachelor of Science in Innovation and Design Engineering (MSGC12) which was a unit in the Innovation and Design Engineering program within the Faculty of Technology and Science at Karlstad University.The client was Crem International AB, a company located in Åmotfors that develops the design, manufactures and markets coffee machines. The supervisor at the company has been Peter Larsson and supervisor at Karlstad University has been Monica Jakobsson. Examiner for the thesis has been Professor Fredrik Thuvander at the Faculty of Technology and Science at Karlstad University.Crem International AB controls a patent, representing a new technology to streamline and minimize use of energy during the coffee preparation and results in a good coffee quality.

This paper aims to describe the variation and develop a method to control the production for the product Metropol Kaktus from the snuff developer Fiedler & Lundgren. We are going to use the requirements from the product specifications as limits of the expected quality when we present methods to control the process. One method attempts to control during the process and the other attempts to maximize the number of products with strived quality before the process starts. Metropol Kaktus is a product produced with high quality, the mean weight is 20,023 gram and this is very close to the weight, 20 gram, which is reported in the product specifications. The variation in weight variable is less than what is reported in the specifications and the minimum weight is over the limit set by Livsmedelsverket.

Traditionally, mining has been performed mechanically with implementation ofyesterdays (and older) data. Several mining companies have started to useautonomous technology and robotics in the production areas although the harshmining environments make it unsuitable for today's electronic equipment. Despite allthe obstacles along the way of digitization, there seems to be no end in sight as thisdevelopment continues. This thesis focuses on what the mining industry is aiming forand why the mining companies are interested in these technologies. The actors of themining industry can be found to have a vision for the future mine, a production with ahigher degree of digitization and resemblances to a factory.

During Spring semester 2011, Linda Engstrom and Malin Heder performed ?Golden Ratio?, a thesis which included 22.5 hp. The thesis followed the syllabus for the Degree Project for degree of Bachelor of Science in Innovation and Design Engineering (MSGC12) which was a unit in the Innovation and Design Engineering program within the Faculty of Technology and Science at Karlstad University.The client was Crem International AB, a company located in Åmotfors that develops the design, manufactures and markets coffee machines. The supervisor at the company has been Peter Larsson and supervisor at Karlstad University has been Monica Jakobsson. Examiner for the thesis has been Professor Fredrik Thuvander at the Faculty of Technology and Science at Karlstad University.Crem International AB controls a patent, representing a new technology to streamline and minimize use of energy during the coffee preparation and results in a good coffee quality.

En människa har en viss mängd kapacitet för att utföra uppgifter. Om uppgifterna blir för svåra eller för många, det vill säga om den mentala arbetsbelastningen blir för hög, går det inte längre att klara av alla uppgifter och prioritering av de viktigaste uppgifterna blir nödvändigt. Piloter behöver ofta ta in och bearbeta en stor mängd information under instrumentflygning. Ofta måste en del av uppgifterna utföras samtidigt och på begränsad tid. Syftet med examensarbetet är att, med hjälp av en subjektiv mätmetod undersöka vilka moment under instrumentflygövningar som medför störst respektive minst mental arbetsbelastning.

During Spring semester 2011, Linda Engstrom and Malin Heder performed ?Golden Ratio?, a thesis which included 22.5 hp. The thesis followed the syllabus for the Degree Project for degree of Bachelor of Science in Innovation and Design Engineering (MSGC12) which was a unit in the Innovation and Design Engineering program within the Faculty of Technology and Science at Karlstad University.The client was Crem International AB, a company located in Åmotfors that develops the design, manufactures and markets coffee machines. The supervisor at the company has been Peter Larsson and supervisor at Karlstad University has been Monica Jakobsson. Examiner for the thesis has been Professor Fredrik Thuvander at the Faculty of Technology and Science at Karlstad University.Crem International AB controls a patent, representing a new technology to streamline and minimize use of energy during the coffee preparation and results in a good coffee quality.

On today?s competitive market, it is difficult to achieve profitability trough high prices on manufactured products. Profitability must be obtained through low manufacturing costs, high quality and short lead times. One of the companies on the market is Sandvik Coromant, manufacturer of tools and chips for metal cutting. This master thesis investigates the methods of manufacturing for boring bars at the manufacturing unit GVH4 at Sandvik Coromant in Gimo, Sweden.

This paper is a research review in the realm of censorship systems andfiltering systems. It applies ethical considerations to the creation of censorshipsystems bringing forward discussion on the ethics of technology with thepurpose of limiting access to information.There is active research being done in the area of automatic content filteringand censorship systems. These are systems that can filter out undesiredmaterial, typically from the Internet, automatically. Used in some nations,many schools and even mandated in some libraries there are many ethicalquestions raised concerning censorship and access to information.Part of the review concerns the level of accuracy of these systems presentedby researchers in the field and the different approaches used. Reviewedarticles centre around automatic content classification and filtering ofpotentially harmful materials with regards to minors while some relate tocensorship technology in a wider sense.Results show a general lack of discussion concerning the ethics of thetechnology in the research reviewed.

ERP system is the information technology that has had the biggest impact in companies? development and way of working in today?s world. ERP system is divided in several applications with a modular software design that allow people in every department in a company to store and retrieve information accurately and in real-time. This master thesis investigates attitudes toward ERP systems among business organisations and ERP suppliers with the overall purpose of analysing to which extent a new ERP system will bring change in the business process. The purpose of this thesis is to make a survey of attitudes toward ERP systems among business organisations and ERP suppliers.

An emerging trend within the construction industry is the expectation of the customer to experience and sense the product, maybe even in a customized manner. The latter trend would extend the necessity of incorporating not only function and aesthetics, but also perception and sensation. To meet this trend while at the same time improve the productivity the use of information technology such as BIM and technical platforms has increased in construction projects. Nevertheless, in spite of large investments, the construction industry has not managed to increase the effectiveness and productivity as much as other industries. Evident is that successful use of information technology depend on the integration and collaboration of various experts in a continuous and dynamic process.

Evertiles är ett spel producerat av Olle Lundahl, Liselotte Heimdahl, Tobias Oldegren och Dan Sjödahl. Vårt mål med spelet var att vi ville göra ett onlinespel centrerat kring att spelaren skulle samla på saker och att spelare skulle mäta sina prestationer mot varandra för att se vem som är bäst. Grundidéen var att vi skulle ha en färdig spelvärld där spelare skulle gå runt och döda monster för att få saker. Idéen utvecklades snart till att vi skulle ha en värld som skapade sig själv genom slumpmässig generering, och med andra spelelement som innebar att det skulle finnas mer att göra än att döda monster. I slutprodukten finns en potentiellt, näst intill, oändlig värld och möjligheter för spelarna att bygga egna städer. Denna rapport kommer detaljera produktionen av spelet, från konceptstadiet tills dess att projekttiden var slut. Våra tankar om projektets gång, och detaljer om våra procedurer, återfinns i både reflektionsdelen, som är majoriteten av denna rapport, samt i våra personliga reflektioner..