This thesis aimed to study the interaction between an educational technology system and its users and give suggestions for design improvements. The technology system is called EDIT (Educational Development through Information Technology) and has been developed and applied at Linköping University?s Faculty of Health Science. EDIT supports Problem Based Learning and enables scenarios to be presented through the World Wide Web. The study was divided into two parts.

There are many eco-brands on food products. It can be confusing for the consumer to know which one to trust or choose and since July 2012, there is an EU law and a mandatory EU organic label that must be displayed on all food products marketed as organic, eco or bio.Organic brands from a consumer perspective have previously been studied in England. This is a similar study in the form of focus groups, to explore and examine how consumers perceive and trust organic brand or labels in Sweden. It also explores which knowledge consumers have regarding why a product has an organic brand and what it means.The study shows that consumers perceive organic brands by brand recognition rather than knowledge regarding what each label means. It also shows that the consumer is confused by and skeptical to the wide range of markings and symbols on organic food products.

Användaracceptans är en viktig del i alla systemutvecklingsprojekt och är också en väldigt lättpåverkad variabel för en lyckad implementering. Därför är det viktigt att ha översikt på sådana faktorer som kan påverka användaracceptansen negativt, en sådan faktor är försening. Denna uppsats belyser sammanhanget mellan hur en försening påverkar användaracceptansen. Genom att låta en undersökningsgrupp genomgå en enkät utformad efter Technology Acceptance Model har jag samlat upp en generaliserad åsikt. Resultaten visar att försening som variabel inte påverkar användaracceptansen för fallstudien..

The project was conducted during a period from November 2014 to January 2015 at the company Westermo Teleindustri AB (WTE). The subject of the project was to make an inventory more efficient. The inventory was located at WTE, but was owned by the subsidiary Westermo Sverige (WSE).The inventory had a high amount of tied up capital. This was due to products that hadn?t been sold.

This report describes the bachelor degree project called ?A case study in strategic product design in collaboration with Elfa? carried out by Mathieu Gustafsson and Pär Rickberg,students at Carl Malmsten Furniture Studies.We had the opportunity to do our degree project in collaboration with ELFA after a previous school project where we made suggestions for new products. Initially the brief was to develop new products for the company which was based on previous proposals.Reasoning led us in to design strategies and how to use such a strategy to develop newproducts for ELFA. During our first superficial analysis of ELFA and its current products, we found that we wanted to recast the framework of identity and context in which the product would be created. According to the researches made by SVID (The Swedish Industrial Design Foundation),companies that continually are working with design strategies strengthens the brand, its competitiveness and become more innovative.

The spread of digital photography has created major changes in the previously stable Swedish photofinishing market. We investigate how companies act to survive in the face of technological change, through our research question: What strategies have actors in the photofinishing business chosen during the changeover from analog to digital photofinishing? Using a deductive method, we have conducted semi-structured interviews with 11 actors in the photofinishing business. Innovation management studies innovation from a number of perspectives, describing effects of innovations on the competitive ability of established actors, and on the value of their resources. The companies were not prepared for the speed of the change.

This final thesis was performed at Ericsson in Gävle between April and June of 2008. Ericsson is a world leading manufacturer of radio base stations (RBS), which handles mobile phone traffic with 2G and 3G technology. The main purpose of this study is to examine if two different types of products (RBS and site material) should have different terms and conditions, today the terms and conditions are the same for both types. During the course of our study we have tried to think of the terms reliability, validity and generalization. The intention in doing that was to keep the thesis at a high academic level. To name an example of this we have tried to keep our minds at an objective level during the interviews and informal conversations.

Organic Light Emitting Displays (OLEDs) are a new type of thin emissive displays predicted to possess superior properties to existing techniques e.g. Liquid Crystal Display (LCD). The main advantages are low power consumption and a thin display structure. This report contains an explanation of the emissive OLED technology, its functionality and the physics of the organic layer structure in an OLED. The technology is described with respect to the two classes of organic materials used in displays, small molecules and conjugated polymers.

The purpose of this report is to come up with possible improvement suggestions to the distribution central at Götene Stål & Verktygs AB (GSV). GSV is a wholesale dealer located in Götene. The company doesn?t produce anything it self, it buys in products and sells them to customers.The distribution central at GSV is the place where the products comes in and gets ready to deliver.To come up with possible improvement suggestions we started with process mapping over the main process and the distribution centre process. The main process here is from the point where the customer gives GSV an order to the point where GSV deliver the order.Our result shows that the major problem in the distribution central at GSV is the big volume differences in the incoming goods.

In article 1.2 c) EC regulation 852/2004 it says that the regulation is not applicable to producers who directly supply small quantities of primary products to the final consumer or to the local retailers who in their turn directly supply the final consumer. An almost identical regulation can be found in article 1.3 c) EC regulation 853/2004. The supply by a primary producer of small quantities of primary products, of animal origin or not, are consequently excepted from these two hygiene regulations. In article 1.3 EC regulation 852/2004 and article 1.4 EC regulation 853/2004 it says that the member states are to establish national rules in their national legislation as to the regulation of exception for small quantities. The aim of this study was to investigate the handling of small quantities of primary products distributed locally in Sweden but also the handling of these products in other countries.

The Swedish government?s objective regarding information technology is to be world-leading in using the possibilities that digitization provides. In some aspects this has already been done, but in some areas much is yet to be accomplished. Although sports and recreational fitness activities are amongst the fastest growing areas of personal and consumer-oriented cloud computing-based technologies around the globe, there are areas within the genre that?s not evolving as quickly.

The purpose of this study is to achieve an understanding of how a CE- marking process is conducted and to identify the relevant factors that must be considered in such a process. We have conducted our study at Lo?vhults Svets & Smide AB (Lo?vhults) in Skruv, Sma?land Sweden, which are manufacturing brackets for small covering constructions.To understand how a CE-marking process is conducted several documents and provisions have been reviewed to achieve a basic understanding and insight of the subject. It thus led to that guideline ETAG 015 were studied and the factors to be considered in the CE-marking of brackets were identified. Together with Jan-A?ke Johansson at Lo?vhults we agreed on four different brackets to investigate for a potential CE-marking.

Background: Today?s market offers customers many more possibilities to choose than before. With that the customer?s requirements on the company have become higher, products of the best possible quality to the less possible price when the customer demands them,specially concerning seasonal products that become out of date when the seasontime has finished.In the recent years the Supply chain management technic has gott attention because of its succesfully way to integrate the companys business processes. Demand Management is an important part of that technic since demand management is dealing with managning thedemand, with the pourpose to find the balance between supply and demand.

In an ever more competitive environment Sandvik Materials Technology,SMT, runs a large-scale program to improve their processes for product development.The purpose with the program is to increase the company?s profitability by increasingthe number of new products in their product portfolio. The strategies SMT is usingfor reaching their goals are to change the way they work with product development byreducing lead time and learning how to prioritize products with the highestprofitability. In the R & D Department the work of improvement pursue by adaptingLean R & D to their way of working. Lean R & D encourages working withcontinuous improvements and eliminating waste.The main purpose for this Master?s Thesis is to develop didactic support to make iteasier to implement Lean in SMT R & D department.

To be seen is essential. Presently, the marketing of different well-known brands within the same product category is done with little variation. To marketing professionals, this creates an opportunity to market products in an unexpected way. The use of incongruent market communication and by creating a discrepancy between a well-known brand?s advertisement and brand scheme, which is already established in customers? minds, is one way to be different.