The company Somas, Säffle, has assigned Fredrik Kjellin the project of finding out how ?KVTF DN250?, one of their own valves, reacts on cutting forces under production. They wish to know if and then how much it?s possible to minimize the wall thickness of the valve with neither plastic nor to big elastic deformations caused by processing.The most critical processes have been identified as rough lathing. The study has shown that the marginal for a wall thickness of two millimeters, to fall short of the yield stress in the most critical process, is good.

sustainable development by reducing the energy use by EU:s directive of energy efficiency and the UN Convention. The second purpose is to present the technical solutions regarding ventilation and heating system that is being used in passive houses. This was done using 8 passive houses, 4 germany and 4 swedish passive houses. Even the international and Swedish system requirements for passive houses have been addressed in this project. The goal was also to explain how and why the mechanical system in passive houses has developed to the technology used today.

The aim of this study is to examine the knowledge and experience of the bad breath among high school students in Kristianstad. A further objective was to measure the amount of VSC (Volatile Sulfur Compounds) among those who perceive themselves to have a bad breath. A questionnaire with 21 closed questions was distributed to 120 high school students from Kristianstad municipality who were between the ages of 17-20. The results of this study revealed that most of the students had good knowledge of halitosis. The majority of all participants thought it was important to smell fresh in the mouth and also experienced most of their breath as very good or good.

This examination work aims to describe how a supply chain around the biggest pellets factory in Sweden will be configured in a logistic perspective. The plant and associated infrastructure are in the building phase and will have production start on the 2 November 2009. The key question that is set in this examination work is to recognize the logistic processes which are essential for an effective flow of materials and information that link the source of supply with the ultimate customer. In order to get the answer, a flowcharting of these supply chain processes is required for understanding the pipeline activities such as input and storage of raw material, the production system and the output of pellets to the customers. The basis for this supply chain map is a model-based representation of these logistic processes and activities that are involved around the pellets factory.

Technical products are becoming more and more complex, this means that the drivers, mechanics and service personnel?s need for assistance such as the service literature is increasing. In this degree project the focus is on the technical manuals of Scania?s Workshop Manual. Today, the information in the Workshop Manual consists of collaboration between text and illustrations.

Issue of study: The development of technology and society is closely linked. Mutual dependency and complex interrelationships make straightforward analysis of issues regarding the future of technology and society hard to perform. Therefore, the study addresses the question of how organizations should describe and analyze the interactions of technology and society in order to gain a better understanding of what the future may bring. Purpose: ? To develop a method for analysis of the future course of issues regarding technology and society in interaction.? To apply and test the developed method through a case study, where it is used to analyze the future of the Russian fuel market.

The purpose of this master?s thesis is to describe and analyse the origin and development of the municipal library of Västervik. There have been four previous libraries and our examination starts in 1859 with the foundation of a parish library. The other forerunners were a working-class movement library and two libraries in the International Orders of Good Templars. Before the merger of the libraries there were discussions in the municipal council, among the working-class movement and in the IOGT.

The aim of this thesis is to analyze and examine India's economic reforms which the country introduced on the government's own initiative in the early 1990s after decades of practicing isolationism. The analysis entails a thorough systematic examination of possible factors that determined the decision to implement the reforms. These factors are derived from two models developed by scholars within the field of foreign policy.The research is performed through an examination where the possible factors for the reforms have been examined on a three-level basis; system-, state- and individual level. It is a qualitative case study that seeks to explain not only why the Indian government implemented the reforms but also to evaluate the validity of the models to the extent that they stand in accordance with the case of India.The conclusion presented in this thesis is that one model works better for explaining the case of India. The model lie emphasis on structural changes, a crisis and political entrepreneurs committed to a certain type of reforms as a prerequisite for policy change to take place.

Forskning har visat att self-efficacy, självkänsla, KASAM och locus of control alla har en effekt på graden av upplevd stress. Dock inte alla tillsammans, vilket denna studie avsåg att undersöka samt deras inbördes relationer och vilken variabel som predicerar stress bäst. Högskolestudenter (n = 65) svarade på varsin enkät. Resultatet visade att alla variablerna hade signifikant negativ korrelation med upplevd stress. Ju högre nivå på variablerna desto mindre stressade var studenterna.

This study was performed to examine the performance of an equity based crowdfunding campaign, as well as seeking to describe the risks, complications and the opportunities that this kind of funding brings. The study was conducted by an empirical case study of a company that was about to initiate an equity based crowdfunding campaign.The conclusion is that the planning of an equity based crowdfunding campaign is time consuming and requires knowledge in many different areas. Therefore it is important to identify in which areas skills and resources already are available within the company, and where it must be obtained through a learning process.The report also highlights that equity based crowdfunding, because of legal restrictions surrounding the issue of unlisted shares, can not be marketed as other types of crowdfunding. This leads to the conclusion that those who invest in equity based crowdfunding do not necessarily belong to the crowd that crowdfunding is generally associated with. Arguments can be made that this crowdfunding model rather resemble traditional angel networks.A technical study was also made about the company's products.

This study was performed to examine the performance of an equity based crowdfunding campaign, as well as seeking to describe the risks, complications and the opportunities that this kind of funding brings. The study was conducted by an empirical case study of a company that was about to initiate an equity based crowdfunding campaign.The conclusion is that the planning of an equity based crowdfunding campaign is time consuming and requires knowledge in many different areas. Therefore it is important to identify in which areas skills and resources already are available within the company, and where it must be obtained through a learning process.The report also highlights that equity based crowdfunding, because of legal restrictions surrounding the issue of unlisted shares, can not be marketed as other types of crowdfunding. This leads to the conclusion that those who invest in equity based crowdfunding do not necessarily belong to the crowd that crowdfunding is generally associated with. Arguments can be made that this crowdfunding model rather resemble traditional angel networks.A technical study was also made about the company's products.

Syftet med denna uppsats är att beskriva och analysera huvudsakligen lärares upplevelse av "den goda examinationen", i bemärkelsen examination som främjar lärande på högskole-/universitetsnivå, i relation till vad studenterna förväntas lära sig, s.k. förväntade studieresultat. Metoden är kvalitativ med abduktiv ansats och resultatinsamlingen bygger på fokusgrupp-intervjuer med studenter, en granskning av kursplaner och intervjuer med lärare. Lärarna menar att de förväntade studieresultaten är viktiga för deras planering och genomförande av kurser och tillhörande examinationer, även om de också påpekar att yttre förhållanden som tid och gruppstorlekar ibland hindrar den ideala examinationen med tanke på studenters lärande. Kursplanernas förväntade studieresultat förefaller dock ganska oviktiga för studenterna.

The purpose of this thesis was to investigate how an industrial company can increase customer value by offering added services to their core products. Theses added services can be categorized into the three different parts of the buying process. The company that was investigated is Smurfit Kappa Kraftliner in Piteå, a large international industrial company active on a business to business market. We have conducted a case study and made interviews with three respondents within the company. The result of the study show that the company offers value added services in each stage of the buying process.

Transportation of oil and gas by the Sea characterizes challenges from a safety viewpoint. In this type of transportation, different sizes of special tankers carrying oil and gas. The marine transportation of these scarce natural riches is involved with risks and hazards, which may lead to many losses; for instance, wasting oil and gas, injuries of people, damaging ships and properties, and damaging environment. The main purpose of this thesis is to evaluate the risks, hazards, and accidents during transportation of oil and gas (mainly Crude Oil, liquefied petroleum gas, and Liquefied natural gas) by the Sea with concentrating on transport safety. Hence, a better understanding of these risks and hazards can contribute to decrease of addressed losses.This study is carried out on risks associated with maritime transportation of oil and gas starting with describing the general casual chain (dealing with causes, incidents, accidents and consequences/causalities), continuing with describing risk analysis techniques (including event tree analysis and fault tree analysis) and risk control measures/options, and finally implementing aforesaid investigations on real data from two areas; namely UK territorial waters and the Baltic Sea.In this study, the results of analyzing data from 1991 to 2010 in UK territorial waters revealed that collision and grounding were two most common accidents in terms of crude oil tankers, LPG and LNG carriers in which 44% of all accidents were equally divided between collision and grounding.

The company Somas, Säffle, has assigned Fredrik Kjellin the project of finding out how ?KVTF DN250?, one of their own valves, reacts on cutting forces under production. They wish to know if and then how much it?s possible to minimize the wall thickness of the valve with neither plastic nor to big elastic deformations caused by processing.The most critical processes have been identified as rough lathing. The study has shown that the marginal for a wall thickness of two millimeters, to fall short of the yield stress in the most critical process, is good.