The purpose with this thesis work was to design and build a technical aid for installingbatteries in telecom base stations. Today that job is done manually, since there is noequipment on the market for that purpose. Installing batteries in base stations manually isa very tough job.To get ideas for possible solutions a preliminary study on existing lift aids was done.From the preliminary study the conclusion that some kind of overhead crane would besuitable for the task was drawn. After that a lift for installing batteries in base stationswas designed, built and tested. The tests show that it is possible to minimize heavy liftingwhen installing batteries in telecom base stations, at a relatively low cost.ii.

Husqvarna is a world leading producer of chainsaws with a well-established brand name. Husqvarna now has an interest in investigating the possibiltiy to expand their production of chains and guide bars to include cutting equipment for timber-harvesters.This project is a technical study which aims to answer questions about cutting equipment for timber-harvesters that have been decided in cooperation with Husqvarna. The questions have mainly been focused on forces, cutting speeds, service and maintenance -as well as general questions regarding the size of the Swedish market.Two methods have been applied to answer the questions. Interviews with retailers of harvesters, producers of harvester heads and harvester drivers.The main findings in this project show that there is a relatively small selection of harvester chains on the Swedish market. In contrast to the selection of harvester chains the selection of guide bars is quite large.

A clean and affordable energy source for cooking is deficient in developing countries. People rely on fuels that contribute to environmental, social and health problems.Biogas is an alternative energy source and an increased investment in small-scale biogas production can in several developing countries be found. Several projects have started to use the technology in developing countries because of the benefits with biogas. Some cases in the establishment of biogas plants have succeeded and some have not. The study is a literature review supplemented by two field studies.

Modern agriculture equipment are more computer based today, and many equipments use a terminal in the tractor where the driver have the opportunity to make adjustments to the equipment. This is the reason why ISO developed a new standard called ISOBUS. It is a communication standard based on CAN specially adapted for griculture equipments. The purpose of the standard is that it should be ossible to equip a tractor with a standard terminal called Virtual Terminal that can be used to control the equipment. The use of the terminal should be independent of the manufacturer of the tractor as well as of the equipment.The purpose of this report is to ?nd a solution of how to use CC Systems on-board computer, CCP XS, as a Virtual Terminal.

Plant Protection Products (PPP) used in the horticulture industry can be both chemical and biological. They are used for weeds (herbicides), insects (insecticides), and fungi (fungicides) and as growth retarders.Many horticulture workers get in touch with plants, treated with PPPs and many of these don?t use any protective equipment.The aim of this project is to illustrate the work environment hazards for staff working with greenhouse pot plants, after they have been sprayed.The method used was observations of the operations for packing plants. I studied the operations and took notes of how operations were performed and what protective equipment they used. I also took photos and asked questions.A literature study completed the observations.

"Outstanding" or "They ought to know more about computers" : A study on computer support at university libraries.The main purpose of this study is to investigate the support computer users are given at university libraries. Further, the aim is to find out if the users thought they received the support that they needed. The study is carried out at two different university libraries. The data is obtained through interviews with the librarians, observations of the daily work at the information counters and questionnaires handled out to the users.The study indicates that variables such as knowledge, time and equipment play a central role in making the computer support successive. To a great extent the computer support is synonymous with information search, but it also deals with word processing and technical support connected with computer errors.

The technical evolution has a great influence on the public libraries. Electronic media becomes more and more common. This Master´s thesis is based upon the Swedish Library law 9§ (SFS 1996:1596) which says: Public- and school libraries should pay special attention to children and teenagers by offering books, information technology and other media, adapted to their needs, to encourage development of language and stimulate reading. From this point of view we have examined why the children´s departments in public libraries offer CD-ROM games which are based upon characters from the literature, how they are used in the daily activity and how they can contribute to the development of the children´s department.We have made literary studies and empirical investigations including interviews, observation studies etc. The results from this studies shows that both young and adults appreciate the CD-ROM games.

In Sweden there are 354 000 private individuals owning forest. Of these forest owners there are at least two thirds that are self-employed, which means that about 215 000 forest owners conduct some kind of work in their own forest. Those numbers do not refer to firewood production, but every year 7.3 million piled cubic meters of firewood are used for heating Swedish households. This implies that many households are also producing firewood. The objective of this study was to assess and analyse the small-scale firewood production in the Umeå-region in terms of persons engaged in the work, equipment used, produced volumes and share of forest-owning households involved in these activities. According to results from a questionnaire, the average firewood producing person is a man between 40-60 years old.

The ability to handle potentially dangerous and hostile situations on a military vesselrequires that the equipment works effectively with the personnel that use it. It is importantthat this equipment can be used by different people. An operator on a military vesselshall be able to handle information about hostile threats, navigation and the steering ofunmanned vehicles. A operator console should therefore be constructed in such a waythat the operator can handle a large flow of information. And the information given bythe technical system should be displayed correctly to facilitate the operators ability tohandle and interpret the information correctly, in order for the operator to make thecorrect decision at any given moment.

The number of wireless networks has increased rapidly among both home users and companies in just a few years. That has brought a lot of good things with it, for example the possibility to connect wireless equipment to the network or Internet from an arbitrary position within range of the accesspoint. But since the transmissions take place through the air some new security risks appear. It?s difficult to restrict the signals to a specific space and thereby a lot easier for unauthorized to eavesdrop or disturb the signals compared to a traditional wired network.

The purpose of this study is to explain the development of the first higher technical education in Trollhättan, with the added perspective of Trollhättans strong industrial profile as a city. The interesting thing being that the city did not try to first and foremost get a regular higher education, but a technical higher education instead. The study describes the political twists and turns the question took from its most early stage in the year 1940 and how the city's industrial profile did indeed have an impact on the development of the first higher technical education. Especially because there was a need for educated engineers in the city, as well as the country of Sweden in large during this time. The study also tries to explain the problems related to such a development, primarily by describing the lack of sufficient housing for schools during the 1950's, this meant that the higher regular school and the higher technical school had to cooperate in finding said housing.

LEXION is the name of the largest series of combines made by the CLAAS factory in Germany. LEXION was introduced on the Swedish market 1996 and was for sale in Sweden from 1997. LMB have sold over 400 LEXION-combines in Sweden. In cooperation with the Swedish general agency we decided to make a market research on the Swedish LEXION-market. The questionnaire was supposed to give answers about capacity and Technical equipment. Before I made the questionnaire I studied manuals and combines. I got 81 answers of about 325 questionnaires. That makes 25 % reply frequency.

This study investigates and describes the phenomenon of ?technical tourism?, in the case ofwind power plants in Sweden. The main purpose of the study is a greater understanding ofa field which to date has remained largely uncharted.Technical tourism is a type of visits to a production site, where the technical aspect ofthe production is the main focal point for the visitor. The definition of technical tourism isbased on concepts within ?Industrial tourism?.

This report explains the need to develop a configuration manager that handles transmission equipment which exists in the Swedish Defence telecommunications network. The configuration module will display the configurations and compatibility among the equipment and their software which are all part of the network.Also included in this report are tools, methods and results for the development of a prototype for the configuration manager. The prototype consists fundamentally of a database assisted by a user friendly website.The transmission equipment handles a lot of important transmission of information and is in the hands of a department of SAAB, OFGCA, by orders from the Swedish Defence Materiel Administration (FMV). Within the work included in this order exists a continuous update of both software and hardware which the equipment consists of. Therefore it?s highly important that there is a monitoring of which of the software and hardware is compatible with one another, ensuring that the functions of the system work properly.The consistent updating has resulted in compatibility issues between components and because of this, a need for a configuration manager has arisen..

The division of Engineering Materials at Linköping University, department of Management and Engineering, conducted a research project concerning Fatigue life of thermal barrier coatings during 2009. During this project equipment to provoke these fatigue failure by rapidly heating and cooling test subjects in cycles, was ordered.Design and manufacturing of the equipment was handled internally at LIU.The equipment was built using a furnace that is lowered and raised over the table where the test subject is placed. To keep the temperature of the furnace a lid slides in place to close the downward facing opening of the furnace when it is in the raised position. On this door there is nozzle that is used to cooling of the test subject by air.To make sure that the equipment can work independently you need an automation controller that can evaluate if movement can occur without danger of collisions. The control system also needs to monitor that all elements are performed according to plan.This degree project is based on a modular system from OPTO 22 and includes the configuration of a PLC that will be supplied with logic and a user interface.The degree project resulted in a graphic interface in which a user can set desired values for different parameters and get information about current values for them.