This work covers a broad analysis of the risks that could impact the achievement of electrical safety of electrical installations. The work includes both electrical equipment such as the installation of electrical equipment.The report illustrates the main technical characteristics of electrical connections greater than 10 mm2 and provides an introduction to the crimping systems for copper and aluminum conductors. In addition to that analyzes the factors that are important to assure the quality of an electrical connection throughout the value stream in terms of both materials such informations. Furthermore analyzed deeper the need for skills development of technicians and other staff.The different parts of this work are analyzed and presented, in theory to studies carried out both at Elpress AB and partly with the help of other scientific reports dealing with similar subjects. In addition, presents a survey that will help understanding the current perception of the electrical connections and cable crimping systems among end users.

This Thesis is performed in cooperation with Kalmar Industries in Lidhult, Sweden. Theprojects main purpose was to develop a draft design of a test equipment. The equipmentwill simulate and valuate the drive-train and brakes at Kalmar?s bigger forklifts.The equipment will be designed so the wheels of the forklift are placed on two rollers;these absorb and affect the forklifts brake- and driving force. With this characteristic anup- and downhill can be simulated.

This thesis for the Master of Science degree was performed at Oppunda Electronics AB. The assignment was to further develop an existing prototype of a dispensing equipment. The dispensing equipment doses a kind of glue, bonding which dentist use to mend teeth. The dispensing equipment is adjusted to dose 12 micro litres of bonding. With the dispensing equipment SafeBond Electronic the user can reduce the bonding consumption with approximately 50 percent.

GPS is perhaps the future in agriculture. The next years will show it but the precision becomes only better and better and the number of users becomes only more and more. This work shows experiences from today's users and how the profitability can be improved on a farm with normal plant cultivation. The aim is to show how big the actual advantage can be to have a GPS and how good precision there is with the equipment. John Deere and Trimble are the big producers of GPS equipment to the agriculture.

This study describes and reviews horse stable equipment from companies who builds and sells the equipment. In the study the companies various equipment was compared with regulations in the law of prevention of cruelty to animals. The purpose with this study was to find out if the companies stable equipment are approved according to the regulations within this area. The study used at five randomly picked companies.This study showed that three of the five examined companies refered, in one way or another, to the law of prevention of cruelty to animals on their website. Unfortunately not any of the companies referred to todays existing law of prevention of cruelty to animals.

Swedish Trotting association was formed in 1925. They are the ones who design the regulations concerning what is permissible and not permissible for the horse, driver and trainer, when they have a license at a Swedish racing track. The Veterinary department of Swedish Trotting association decides in consultation with representatives from veterinaries around the country what is allowed and not allowed, based proven experience, combined with the availability of scientific data and Veterinary Department's own assessment. After stricter regulations for good animal welfare from the Swedish government, Swedish Trotting association is going to work out a workable model for how new equipment can be tested in the future to see how the equipment affects the horse. In the future, all equipment will be objectively tested before approved. The purpose of this work was to develop a well-functioning model for this. The research-question for this work is: Is this study design a well-functioning model of how the equipment should be tested in the future? The equipment used for designing this model was bitless bridle with a bit.

The E-department at GETRAG All Wheel Drive in Köping have problems with the efficiency on parts of their production equipment. The equipment with the most significant efficiency problems are four automated multifunctional production cells that produces housing for rear drive units. The major part of the problem is the large amount of small stops that causes the low efficiency.The department already worked with logging of interruptions and efficiency calculations before this project started. However this work was not done to the extent considered necessary for a systematic follow-up of the interruptions.The aim of this paper is to point out a more effective and systematic way to work with logging of interruptions and the follow-up. In addition the equipment were studied with a method for efficiency calculation that ? if used properly- is a more powerful and a visually better method than the one used by the company today.As the initial current state analysis of the equipment was made a lack of documented knowledge about the equipment was discovered.

This thesis describes the redesign ofequipment designed for drying bags thatis used in Fresenius Kabis´manufacturing of their nutritionmedicine in Uppsala. The need of thistask arise during the start of thedevelopment of a new packaging line werethis equipment were meant to be used. Anevaluation of the bagdryers capacity andcapability was necessary.The work started with gathering ofinformation from suppliers of the usedcomponents and from the responsibleengineers for this equipment. Aneducation to learn how the equipmentworked and how to operate it were taken.That was followed by the creation of astudy plan were the tests were plannedto test different parameters effect onthe drying result and to see if thebagdryer managed to handle the bags ofthe correct format in the pace that theequipment should be designed for.The test results detected a need ofdesigning a unit with a function thatholds the bags in place while passingthrough the dryer in order to attainhigh quality results. The results werelater used for optimization of thedesign.

Syftet med detta examensarbete är att på uppdrag av Volvo Construction Equipment hitta en metod för att hantera och kategorisera idéflödet i deras idéhanteringssystem Interact. Den metod som användes var kvalitativ innehållsanalys. Slutsatsen är att metoden gick att använda för att kategorisera idéflödet men att ett material som sträcker sig över många ämnen tenderar att sänka tillförlitligheten på resultatet. Vidare bedöms materialet som detta arbete har producerat kunna användas för att bättre ta tillvara på idéer, vilket uppskattas av Volvo Construction Equipment..

The purpose of this thesis is to identify the factors that drive efficiency and effectiveness in technical development projects performed at A?F?s department of product development. In addition to identifying and analyzing these factors, the thesis also analyzes what needs to be taken in to account in order to implement a measurement system that is able to both monitor and control the identified factors.The thesis has been performed in a qualitative manner. It is based on interviews with people from several different technological companies, within different lines of business, all of which are customers to A?F?s department of product development.The results show that there are seven critical factors for project efficiency and effectiveness.

This paper deals with archery in the Viking Age settlement of Birka and in particular the presence of Euro Asiatic, steppe nomadic archery equipment at the Birka Garrison and one Birka grave. The equipment contains for example closed quivers and a bow case. This paper also contains a discussion of archery battle techniques and tactics in Viking Age Birka and the implications of the above mentioned equipment to this discussion. The analysis insinuates the importance and status of archery in 10th century Birka..

I work on a lighting design for a dance performance to be on tour. A lighting design adapted for three different conditions was made: - One comprehensive where I allow myself a great deal of creative freedom, adapted for the stages with major technical conditions. - One smaller version for stages with less equipment and with less time for preparation on site. - One design for very simple conditions. I also examine the specific differences between typical theatrical lighting design and typical dance lighting design, and the best way to prepare for the hands-on stage design phase..

The aim of this bachelor thesis has been to investigate some of the materials present in and onprinted papers which might be suitable for analysis. A brief history of paper making and somepigments were studied after which the theory of some of the available methods for technicalanalysis were summarized. Two works of art on paper were chosen for a closer examination,both are woodblock prints but of different composition and origin. The investigation wasmade to exemplify some of the common techniques applied on works of art. There were twoaims in these examinations.

This thesis discusses and analyses the existence of two different perspectives, a social and a technical one, in Library and Information Science (LIS). Most of the time the division between these perspectives seems to result in research only using either of them. This can be a problem when studying complex phenomena. We therefore see a need for a metatheory that unites the social and the technical. By presenting and analysing all doctoral dissertations published at the Swedish School of Library and Information Science (SSLIS) 1993-2005, we try to detect and critically discuss the dichotomy between the two perspectives.

This thesis describes the redesign ofequipment designed for drying bags thatis used in Fresenius Kabis´manufacturing of their nutritionmedicine in Uppsala. The need of thistask arise during the start of thedevelopment of a new packaging line werethis equipment were meant to be used. Anevaluation of the bagdryers capacity andcapability was necessary.The work started with gathering ofinformation from suppliers of the usedcomponents and from the responsibleengineers for this equipment. Aneducation to learn how the equipmentworked and how to operate it were taken.That was followed by the creation of astudy plan were the tests were plannedto test different parameters effect onthe drying result and to see if thebagdryer managed to handle the bags ofthe correct format in the pace that theequipment should be designed for.The test results detected a need ofdesigning a unit with a function thatholds the bags in place while passingthrough the dryer in order to attainhigh quality results. The results werelater used for optimization of thedesign.