This study was performed to examine the performance of an equity based crowdfunding campaign, as well as seeking to describe the risks, complications and the opportunities that this kind of funding brings. The study was conducted by an empirical case study of a company that was about to initiate an equity based crowdfunding campaign.The conclusion is that the planning of an equity based crowdfunding campaign is time consuming and requires knowledge in many different areas. Therefore it is important to identify in which areas skills and resources already are available within the company, and where it must be obtained through a learning process.The report also highlights that equity based crowdfunding, because of legal restrictions surrounding the issue of unlisted shares, can not be marketed as other types of crowdfunding. This leads to the conclusion that those who invest in equity based crowdfunding do not necessarily belong to the crowd that crowdfunding is generally associated with. Arguments can be made that this crowdfunding model rather resemble traditional angel networks.A technical study was also made about the company's products.

The examination has been performed at Bjerking AB, which is an architectural and engineering company. Bjerking AB has the ambition to be a member of Green Building.The Green Building program developed in year 2005 by The European Commission, the program is an environmental system with the aim to improving energy efficiency within the sectors of non-residential buildings. The minimum requirements to participate the program are following: in new-built buildings the calculated energy consumption must be 25 % lower than the requirements in the BBR (Building regulations) and in refurbishment the reduction must be 25 % lower than before the optimization.The aim of this study has been to examine and review the company Bjerking AB's energy efficiency work in the project of building the school/kindergarten S:ta Maria Alsike, where the goal is to get this building Green Building classed. A description of requirements to become a member of the Green Building has also accomplished in the thesis.The methods performed in this study are literature review, searches on the Internet, studies on the project database for facts/values, calculation of energy consumption and interviews of members of the Green Building. The following issues have been dealt with in the report;-          Did the building in the project manage the requirement to achieve an   energy consumption that is 25% lower than the requirements in BBR?-          What technical measures/system was selected in the building?-          What kind of cooperation was the project based on?-          What is required for consultancy companies and real estate owners to become members of the Green Building?The study of the project and calculation of estimated energy consumption in the building, give the result 47 kWh/m2, year.

This essay contains a comparative analysis of Erik Olin Wrights Marxist class analysis and Michael Hardt and Antonio Negris post-Marxist class analysis as presented in their books ?Empire? and ?Multitude: War and democracy in the age of Empire?. I discuss the shift in analytical focus from state level to global level that Hardt and Negri's analysis represent and the ensuing relevance of this for contemporary class analysis. The essay also address the challenge and implications posed to class analysis by the ever increasing economic globalization, from a material production to an ever growing immaterial service economy and the decrease in state power in controlling capital and labor movement. I propose that analytical understanding of class conflict help us to a better understanding of the mechanisms and dynamics that generate social and economical inequalities and that an updated Marxist class analysis still have much to contribute to our understanding to how these issues not only shape our society but also our capacity to counteract them..

The purpose of this thesis was to investigate how an industrial company can increase customer value by offering added services to their core products. Theses added services can be categorized into the three different parts of the buying process. The company that was investigated is Smurfit Kappa Kraftliner in Piteå, a large international industrial company active on a business to business market. We have conducted a case study and made interviews with three respondents within the company. The result of the study show that the company offers value added services in each stage of the buying process.

This thesis describes the new construction of a small house and it includes studies of three heating systems: geothermal heating, district heating and pellet. The purpose of this thesis is to project a small house which can manage Building Regulations, BBR conditions and then examine three possible heating systems for the small house. This thesis is a literature study which gives an understanding of the heating systems technical structure, properties and costs. An empirical study completes the literature study by giving a deeper understanding of district heating costs and pellet costs. The empirical study contains two interviews, one of which was conducted in a district heating corporation and the other interview was conducted in a pellet corporation.

In today?s society a large focus is put on energy systems and how our energy systems are built up. In order to make sure that we in the future still can enjoy the living standards that we are used to today, Sweden and EU have made a number of decisions on making our energy system more energy efficient and consequently reduce the usage of energy resources. By 2020 the European Union should have reduced its energy consumption by 20 % compared to 1990?s level, and by 2050, 50%.

The Intensive Care Unit (ICU) is a special unit for patients who is in the need for emergency life-sustaining measures and every patient has complex medical- technical equipment. The experiences of a critical illness and the needs of critical care are experienced in different ways. The purpose of this study was to describe the experiences from patients in the ICU and how this experience has an influence on the patients. The method was a study of literature with a qualitative inception based on eight scientific articles and the analysis of content has been inspired by Graneheim and Lundman (2003). The result of the study is presented by four categories: to loose the ability to make themselves understood, to be forced to adjust to the environment of caring, to have the lack of connection with reality and to be in an intensive care environment, The results showed that patients in the ICU are affected by the attitude from the staff, the equipment around them as well as the sounds and lights in the environment there.

This Master?s Thesis aims to illustrate in what ways the two Swedish environmental assessment tools, the Environmental Load Profile and EcoEffect differ and if performed valuations gives different results and environmental goals.The built urban environment causes about half the environmental loading in Sweden. The society?s ambition towards sustainable development has resulted in demands reducing the environmental load. One way to accomplish this change is with the assistance of tools for environmental assessment of the built environment.

Several technical solutions are ready to step forward as the new generation of propellant, and this report aims to explore the possibility of commercializing fuel cell cars. The report is based on current research and data from today's technology and engineering solutions that are estimated to be commercially realized before 2020.A mapping of today?s different fuel cell options has shown that the most suitable fuel cell option is the Proton Exchange Membrane Fuel Cell, which uses hydrogen as fuel. The report is focusing on a techno-economic well-to-wheel analysis of hydrogen and the energy balance and costs in a system perspective. The basis for this analysis consists of two centralized methods of production, steam methane reforming (SMR), and alkaline water electrolysis.

With this essay we have had the intention of observing Linköping University as an example of a public authority undergoing change. In the information society of today, the increasing competition and internationalization affects, not only companies and organizations, but also the public sector. After having been concerned with neutral information spread only, according to"the third mandate", employees at the Department of Information at Linköping University has also started dealing with marketing, so as to increase the recruitment of students. As a result of this, the work team has been divided into an editorial staff and a department with emphasis on market issues. To strengthen the trademark of Linköping University one has chosen to mediate certain values representative for the university - an interdisciplinary and innovative approach and an entrepreneurial spirit.

Today there are many applications of digital terrain models (DTM) and the requirements of low uncertainty increases. Most of the DTM are produced with Global Navigation Satellite System (GNSS), terrestrial laser scanning (TLS), airborne laser scanning (ALS) and total stations. Guidelines for the preparation and verification of DTM are found in Swedish Standards Institute ? Technical Specifications (SIS-TS) 21144:2007 and SIS-TS 21145:2007. These were defined in collaboration between Swedish National Rail Administration, Banverket, and Swedish Road Administration, Vägverket, to satisfy the needs of requirement formulations in the production of DTM planning, design and construction. The purpose of this paper is to produce and control DTM over Åkermans kulle, located west of the University of Gävle, according to SIS TS 21144:2007 using GNSS with network-RTK, TLS and ALS.

Ett Film som projekt, en film om ljud, en film om ljudet i film. En film inspelad professionellt med professionella medarbetare. Kandidatarbetet gick ut på både skapa en film inriktad på ljud och skapa ett fungerande filmteam. Arbetet tar upp både det tekniska inom filmljud men även processen i ett filmteam. I arbetet följer vi processen från dess början till dess slut.

Performance measurements have become very important tools for companies because of ever increasing global competition in today?s market. Delivery dependability is one of the three most important performance measurements for companies to focus on and that makes this analysis, of the dependability, both very interesting and up to contemporary. In this rapport different aspects of delivery dependability will be dealt with, and a weight will be on what to measure and how to measure it together with how to present the outcome of the measurements. A discussion has also been held regarding what goal the company should have on its dependability.

This essay discusses the import of cod (Gadus morhua) in Sweden during the Middle Ages through isotope analysis of cod vertebrae. The isotope analysis is used to trace the cods origin to either the Baltic Sea or the Atlantic Ocean. The bones were subjected to d13C, d15N and d34S analysis; 64 of  the analyzed bones met the quality criteria. The isotop data showed that import of Atlantic cod was significant in medeval Sweden. The analysis suggests that there is no specific time or event that the sites start to import cod but this varies from site to site. .

Due to an increasing global market with a growing competition and an escalating technologydevelopment the demands on companies today are increasing. To maximise the output fromtheir recourses they need to be more efficient. The research on product development and how toensure the efficiencies in the process are extensive and companies could by adapting andimplementing the result of this research use its benefits.This master thesis is made for Knightec AB with the aims that through interviews anddiscussions with three companies investigate, collate, justify and give proposals for productdevelopment process together with supporting methods and procedures for technical projectmanagement. Besides Knightec AB three other companies located in Sweden has beenparticipating in this study. Through semi structured interviews and discussions in focus groupsinformation from the three involved companies were obtained.