Sök:

Sökresultat:

3632 Uppsatser om Systems methodology - Sida 49 av 243

Mjukvaruplattform för riggstyrning

Today the competition in the automobile industry is getting all tougher. The technology behind cars becomes more advanced. To get ahead of competitors car companies has to look into new areas of innovation.One important area is vehicle safety. Bigger companies have come so far in vehicle safety that difference between cars more depends on the car type (size) than the technology behind it.There is one area where vehicle safety that still has great opportunities for improvement, which is in active safety. The term active safety states that the car has the ability to identify treats and automatically respond to the treats.

Skapandet av ett integrerat ledningssystem

To be able to compete on the market environmental Management System has become an important part of operations work. However, many companies still haven?t implemented an environmental management systems due to lack of time and the high costs. One of the companies with this problem is Falu Bildemontering. Their goal is to accredited according to the ISO 14 001 certificate.

Raalie steering systems

Under HT08 och VT09 har vi under vårt examensarbete tagit fram en ny mekanisk produkt. Det är ett mekaniskt styrsystem för sjukhussängar. Det är ett enkelt och billigt system, och det kommer att underlätta för personalen på sjukhusen runt om i landet. Då produkten gör det lättare för personalen att kontrollera sängen, samt att det nu räcker med en person som utför arbetet med att knuffa sängen..

Att styra säkerhet med siffror : En essä om (att se) gränser

Work, especially that in complex, dynamic workplaces, often requires subtle, local judgment with regard to timing of subtasks, relevance, importance, prioritization and so forth. Still, people in Nuclear Industry seem to think safety results from people just following procedures. In the wake of failure it can be tempting to introduce new procedures and an even stricter "rule following culture". None, or at least very little, attention is given to tacit knowledge and individual skills. I am aiming to highlight the inadequacy of putting too much trust in formalization and that reporting and trending of events will contribute to increased learning, an increased nuclear safety and an efficient operational experience.

Tidsstudier i kalvuppfödning :

Swedish agriculture stands in front of big changes the whole time. As a milking producer you have to adapt and develop the company to these changes and find the best solution. This potential is easy to find if you compare your company with other similar companies. Labour cost is the biggest cost in milking production after the cost for food. Today it is rather easy to measure how many hours per cow different system of cow houses needs, but we do not know so much about how many hours it takes to breed a calf. To learn more about the labour time with the calves during the first time after the calf was born, I made time studies on five different farms with calf hutches, automatic milk system, large calf boxes, and smaller calf boxes with teat buckets.

Gränsobjekt i organisationsförändring : En fallstudie av en affärssystemsimplementering

olikaverktygkanunderlättaimplementeringenavettaffärssystem(enterpriceresourceplanning-­?systems).Genomattappliceraenhetlighetsramverket(comonality-­?frameworkforIT-­?enabledchange)påfallstudienundersökervimedhjälpavbegreppetgränsobjekt(boundaryobjects)hursådanaverktygkanspelaenviktigrollförenlyckadimplementering.RättanpassadegränsobjektkanbidratillattskapaenförståelseförnyIT,samtintresseförattanvändaden.Efterendiskussionomdeempiriskafyndenpresenterarvirådtillpraktikerpåområdetochföreslårblandannatattverktygmedettvisuelltgränssnittärfördelaktigaimångasituationer.UppsatsensbidragtillforskningenbestårienutvecklingavenhetlighetsramverketgenomattvivisarpåhurgränsobjektpåverkardedimensionersomenligtramverketmåstegeshänsynvidenIT-­?organisationsförändring..

Energieffektivisering av modern tillbyggnad till äldre skola : fallstudie från Österbyskolan i Österbybruk

The Swedish government has introduced a goal to reduce the energy intensity by 20% to the year 2020. To reach this goal actions need to be taken throughout the energy sector which includes residential and commercial buildings. This thesis considers the possibility to reduce the energy usage in a building located close to Uppsala. The analyzed building is a combined office, cafeteria and entrance and was completed about half a year before this project started. Therefore the measures presented for a more energy efficient building are presented as measures for future constructions.Simulations have been made in VIP-Energy, a dynamic energy calculation program.

Förändrad interaktion, förändrat värde? : En kvalitativ studie om värdeskapande vid mänsklig och teknisk interaktion

The progress in the field of technology is often described as massive and its development has had a great impact on the social development (Vetenskapsrådet, 2012). As a result of the digital evolution, there has been a change in the way customer and company interact (Normann, 2011). The traditional way for players to interact with each other required an interaction human to human (ibid), a mode of interaction that now can be replaced or supplemented by todays technology and often Internet-based solutions (Salomonson et al., 2013). These technological solutions, the technical interaction, are often referred to as self-service systems. These systems enables the customer to carry out the tasks previously performed by the company (Hilton and Hughes, 2013).

Prefabricerade passivhusväggar

Background: The most energy efficient houses today are so called passive houses. These houses achieve high energy-efficiency partly by having well insulated walls. U-value describes the amount of heat transfered through a building element, the more insulation, the smaller U-value. A typical passive house wall have a U-value of 0.10 W/m2,°C. The passive houses are primarily made as small family houses and not as a block of apartments.

Anskaffning av affärssystem : En beskrivande studie av anskaffningsprocessen.

I en konkurrenskraftig omvärld, finns det ett behov hos företag av väl integrerade informationssystem. Systemen har till uppgift att se till att aktuell information i verksamheten kommer alla till godo när personalen har behov av den. Idag har företag standardiserade affärssystem till sin hjälp för att hantera den information de har behov av i sin verksamhet. Studien har haft som syfte att beskriva hur anskaffningsprocessen kan se ut på olika företag och att besvara följande frågor:·       På vilka grunder togs beslutet om införskaffande av ett nytt affärssystem?·       Har ledningen varit involverad i anskaffningsprocessen?·       Ledde implementeringen till ett system företaget blev nöjda med?Studien har gjorts med en kvalitativ ansats, där halvstrukturerade intervjuer användes för att samla in empiri.

Tuta i lurendrejeri

Purpose: Exploring the relatively new technology of convolution reverb, to gather knowledge on its limitations when used practically in the production of pop music, and from these findings to learn about applications in other performing arts and sound design. Methodology: This is a case study of creating convolution reverb by doing impulse responses (IR) and then applying them to studio recorded pop music. The empirical data consists of the final song results, notes and journals from during the process and the comparisons, as well as established litterature on acoustics, psycho-acoustics and music production. Results: Convolution reverb can widely and freely be used in the production of music and other audio-based art forms, since our study shows that the result of a well-made impulse response from a particular room is indistinguishable from music that is actually played and recorded in the same space..

Critical Success Factors When Performing a Superior Supplier Evaluation ? a Benchmark Study at Sony Ericsson and Tetra Pak

Problem discussion: Long-term supplier relationships have become more common. Hence, supplier evaluation is a critical activity for many companies. However, making a relevant supplier evaluation is time consuming. Therefore, it is important to decide which of the suppliers to put an extra effort on. Should all suppliers be evaluated in the same way? Previous, focus has been on purchasing of direct material.

Kognitionsforskning i djurhållningen: grisars kognition och dess tillämpning vid slaktsvinshållning

Pigs are often mentioned as relatively intelligent animals when compared to other nonhuman species. Despite this knowledge, the vast majority of pigs are kept under conditions that lack opportunities to satisfy their cognitive needs. Therefore, a need to evaluate the present scientific studies about pig cognition was acknowledged, in order to evaluate to what extent the knowledge is applied in the husbandry of finishing pigs. If a considerable lack of application was determined, suggestions about how to use the obtained information to improve pig welfare were also to be made. A synthesis of the present literature was made, and it could be concluded that a considerable amount of studies had been carried out in the present area. The pigs of today appear to have the same behavioural and cognitive needs as their ancestor, the wild boar.

Den elektroniska handeln och Relationen mellan Kund och Leverantör -Ett kundperspektiv

Background: Commerce over the Internet has exploded in recent years. For many companies it has become a necessity to offer their products overthe Internet. This new market ought to change the conditions for relations between customers and suppliers. Purpose: Our aim is to describe and analyse the factors that influence the relations between customers and suppliers, from a customer view, when commerce is conducted over the Internet.Delimitations: The study is limited to B2B commerce with IT-products. Methodology: The thesis is based on a study of the company IMS, their e-commerce site and organisations that buy IT-products over the Internet.Conclusion: Internet opens up new possibilities for custom designed offers.

Upphängning av bandboggi

Denna avhandling avser produktutvecklingsprocessen för ett upphängningssystem tillhörande ett banddrivet fordon. Syftet med systemet är att tillåta fordonet nå högre hastigheter. Det ska också tillåta dämpning och viss nivellering vid körning i kuperad terräng. På så sätt blir fordonet smidigare och föraren utsätts för mindre helkroppsvibrationer.I samarbete med forsknings- och utvecklingsavdelningen på BAE Systems Hägglunds AB genererades ett antal koncept på upphängningssystemet. Genom att använda listan av produktspecifikationer som BAE Systems tidigare tagit fram tillsammans med exempelprocessen beskriven i Product Design and Development valdes ett koncept att analysera mer detaljerat.

<- Föregående sida 49 Nästa sida ->