AbstractIn the fall of 2003 a project was started in the Swedish building sector that is called BASTA (the building sectors’ termination of especially harmful substances). The project is operated by the building companies NCC, Skanska, PEAB and JM, the Swedish Building Industry and the Swedish Environmental Institute IVL. The purpose of the project is to create a common environmental assessment system for the entire building industry and with the help of this system phase out the use of especially harmful properties from building products.In a large sense BASTA works like this; On the BASTA web site there is a database, to which a supplier can register the company and the company’s products. Only those products with a substance content that fulfil the demands of the BASTA system, is to be registered. As it is the supplier himself that carries out the registration of the company and the company’s products to the system, the BASTA-organisation annually controls that the companies that are registered in the database, fulfils BASTA’s demands.Since NCC is one of the companies that operates BASTA, BASTA is probably going to be the environmental assessment system that is recommended for the company in the future.

This report discusses the development of an autonomous system that can travel a distance of atleast 30 meters on two wheels. The system, the robot, detects black lines and stops if one isdetected. A remote control can be used to start and stop the robot. The robot is constructed ofmainly steel with smaller, more detailed, parts in plastic. A significant amout of time has beenused to enable the robot to balance on its own.

Medarbetarsamtal är en form av samtal på individnivå. Samtal kan vara en viktig arbetsform även för hälsopedagoger som arbetar med människor på individnivå. Att veta hur pedagogiken kan användas i samtal för att påverka individer blir därmed en stor tillgång.Undersökningen syftar till att ta reda på om och i sådana fall hur pedagogiska ledare använder sig av pedagogik i medarbetarsamtal.Uppsatsen bygger på en kvalitativ ansats och den metod som har använts är intervju. Fyra intervjuer har genomförts med en urvalsgrupp bestående av personer med pedagogisk högskoleutbildning och som arbetar som ledare på en pedagogisk arena.Resultatet visade att medarbetarsamtalen till stor del är baserade på utveckling och utvecklingsinriktat lärande. Reflektion ses som det viktigaste verktyget man som pedagog har i samtal som syftar till utveckling hos en annan individ.

Syftet med detta projekt är att skapa en prototyp för ett digitalt tentamenssystem, där studenterna skriver tentamen med hjälp av läsplattor, samt utvärdera vilka fördelar och nackdelar ett sådant system skulle kunna medföra.Huvudfokuset för detta projekt var att utveckla en prototyp för ett digitalt tentamenssystem med stöd för bland annat automatisk rättning, kompilering och automatisk evaluering av programspråksfrågor. Vi försöker samtidigt bibehålla de positiva aspekterna av ett analogt system, som till exempel möjlighet för både lärare och elev att uttrycka sig genom frihandsritning.Denna studie har visat att det finns många fördelar för både studenter och lärare med en övergång till ett digitalt tentamenssystem samt att man med små medel kan skapa en fungerande prototyp av ett sådant system..

This master thesis has been carried out as a prototype development project. The project hasbeen performed in cooperation with ÅF Combra AB. The purpose with the master thesis is toconstruct a Bluetooth interface between an accelerometer and a smartphone and constructinga physical prototype containing an accelerometer. This is done to test a new user interface tomobile phones. The master thesis has also included a research about the possibility toimplement distance measuring with Bluetooth.

Den här uppsatsens syfte är att i Uppsala och Knivsta kommuns översiktsplaner undersöka natursyn, hållbar utveckling och uppfattning om klimatfrågan. Den valda metoden för att besvara frågeställningen är en kvalitativ textanalys i form av en diskursanalys. För att kunna analysera översiktsplanerna har tre olika huvudkategorier skapats utifrån en inläsning och en avkodning av materialet: natursyn, stark respektive svag hållbar utveckling och klimatfrågan. Dessa kategorier tenderar att integreras med varandra. En ekocentrisk syn på naturen hänger till exempel ihop med en stark hållbar utveckling och möter klimatförändringarna med begränsning av växthusgaser som strategi.Synen på naturen i översiktsplanerna är något varierad och domineras av en antropocentrisk syn på naturen.

This essay will cover the Swedish electoral system with a focus on the proportional representation andthe process involved from the conversion of votes to seats in the parliament. This process consists ofseveral methods which are created by political decisions as well as mathematical formulas and is notalways perfect in terms of equalization. An increment of six adjustment seats would have made thegeneral election of 2010 more proportioned. Despite this, the Swedish electoral system is wellconstructed and the essay will highlight areas which could be subject for improvement as well asexplaining fundamental concepts of the process..

The Library of Uppsala University has decided to change their classification system from the Swedish SAB system to the American Dewey Decimal Classification. One of the main reasons for this decison was that Kungliga biblioteket also has made an exchange between these systems. Due to that, the national bibliography of Sweden classifies Swedish documents according to Dewey Decimal Classification and the SAB system is no longer maintained. A transition to Dewey Decimal Classification will enable Swedish librarians to import foreign catalouge posts and classification codes and will provide them with a common standard between their libraries and other libraries due to the use of the same international classification system. It is disputed whether the Dewey Decimal Classification is equally suitable for all subjects.

Automatiserad service är ett växande område där olika produkter och tjänster erbjuds genom kiosk- automater. Att använda den här typen av system är inget nytt, det har använts på flygplatser en lång tid för att avlasta personal, eektivisera och spara kostnader samt göra det smidigare för kunden att resa. Skillnaden är att det har börjat anammas av flera typer av företag och framförallt så är dessa system eektiva i situationer där man vill spara in pengar och låta kunden själv genomföra sina köp eller bokningar. Men för att dessa system ska vara kompletterande och inte öka utgifterna för företagen så krävs det att kiosk-tjänsterna har en fungerande och eektiv interaktionsdesign. Annars leder det till missnöjda kunder och ökade omkostnader för uppdateringar och underhåll.Vi har undersökt och utvärderat tre system för att se vilka brister som finns i deras användbarhet och hur detta påverkar efektiviteten.

AbstractIn the fall of 2003 a project was started in the Swedish building sector that is called BASTA (the building sectors’ termination of especially harmful substances). The project is operated by the building companies NCC, Skanska, PEAB and JM, the Swedish Building Industry and the Swedish Environmental Institute IVL. The purpose of the project is to create a common environmental assessment system for the entire building industry and with the help of this system phase out the use of especially harmful properties from building products.In a large sense BASTA works like this; On the BASTA web site there is a database, to which a supplier can register the company and the company’s products. Only those products with a substance content that fulfil the demands of the BASTA system, is to be registered. As it is the supplier himself that carries out the registration of the company and the company’s products to the system, the BASTA-organisation annually controls that the companies that are registered in the database, fulfils BASTA’s demands.Since NCC is one of the companies that operates BASTA, BASTA is probably going to be the environmental assessment system that is recommended for the company in the future.

AbstractIn the fall of 2003 a project was started in the Swedish building sector that is called BASTA (the building sectors’ termination of especially harmful substances). The project is operated by the building companies NCC, Skanska, PEAB and JM, the Swedish Building Industry and the Swedish Environmental Institute IVL. The purpose of the project is to create a common environmental assessment system for the entire building industry and with the help of this system phase out the use of especially harmful properties from building products.In a large sense BASTA works like this; On the BASTA web site there is a database, to which a supplier can register the company and the company’s products. Only those products with a substance content that fulfil the demands of the BASTA system, is to be registered. As it is the supplier himself that carries out the registration of the company and the company’s products to the system, the BASTA-organisation annually controls that the companies that are registered in the database, fulfils BASTA’s demands.Since NCC is one of the companies that operates BASTA, BASTA is probably going to be the environmental assessment system that is recommended for the company in the future.

AbstractIn the fall of 2003 a project was started in the Swedish building sector that is called BASTA (the building sectors’ termination of especially harmful substances). The project is operated by the building companies NCC, Skanska, PEAB and JM, the Swedish Building Industry and the Swedish Environmental Institute IVL. The purpose of the project is to create a common environmental assessment system for the entire building industry and with the help of this system phase out the use of especially harmful properties from building products.In a large sense BASTA works like this; On the BASTA web site there is a database, to which a supplier can register the company and the company’s products. Only those products with a substance content that fulfil the demands of the BASTA system, is to be registered. As it is the supplier himself that carries out the registration of the company and the company’s products to the system, the BASTA-organisation annually controls that the companies that are registered in the database, fulfils BASTA’s demands.Since NCC is one of the companies that operates BASTA, BASTA is probably going to be the environmental assessment system that is recommended for the company in the future.

In the pilot plant at Hammarby Sjöstad, Sjöstadsverket, several new methods are tested in order to achieve a good use of resources. When a new technique is considered it is often the performance of the technique itself, under given conditions, that is evaluated. However, in order to evaluate the overall function the whole picture is needed. With a system analysis it becomes possible to make a comparison where all the positive aspects are put up against the negative ones, for the technique itself as well as its requirements. In this way the influence that minor components have on an entire system can be considered.This report presents a system analysis of an anaerobic membrane reactor (MBR) with a VSEP-membrane (Vibratory Shear Enhanced Process).

Quickmatch is a company that recruits students to other companies that need temporary workers. Today all administration is done by hand, which is very time demanding and therefore inefficient. Employees send assignment reports by e-mail about the working hours and breaks to the administration office. Since these reports are handled manually, there is a great need for an automated system that makes the company more scalable.The purpose of this work was to solve the defined problem, i. e.

During test flights SAAB uses the data acquisition system COMET 16. The part of the system that receives the signals from the sensors and converts them is called KSM 15. The purpose of this thesis is to develop a data acquisition module on stacked PC/104 modules with a lower production cost. Our work has been divided into one part about analog signal conditioning and a second part with digital filtering and memory management of the sampled data. The analog part, designed of regular components like instrument amplifiers, voltage references, operational amplifiers and multiplexers, adjusts the sensors signal levels for the ADC?s that converts the signals.